Henny Penny HMI-105 - Manuals

Model HMI-103/105 1-5. SAFETY The only way to ensure safe operation of the Henny Penny IslandWarmer is to fully understand the proper installation, operation, andmaintenance procedures. The instructions in this manual have beenprepared to aid you in learning the proper procedures. Whereinformation i...

Model HMI-103/105 2-1. INTRODUCTION This section provides the installation instructions for the HennyPenny Island Warmer. Installation of this unit should be performed only by aqualified service technician. Do not puncture the skin of the unit with drills orscrews as component damage or electrical s...

Model HMI-103/105 3-4. SHUT DOWN AND CLEAN UP 1. Remove all power from unit by unplugging the cord or turning off the wall circuit breaker. To avoid burns, allow the unit to cool before cleaning. 2. Remove well cover, and clean with soap and water at sink. 3. Clean all surfaces with a soft cloth, so...

Model HMI-103/105 SECTION 4. TROUBLESHOOTING PROBLEM CAUSE CORRECTION Product not holdingtemperature • Radiant heat too low • Only hold product for recommended times • Turn to a higher setting • Turn to a higher setting • Product held too long • Air heat too low Lights will notturn on • Check fuse a...

Model HMI-103/105 G L O S S A R Y HENNY PENNY HOLDING CABINETS air temperature probe a round device located inside the cabinet that measures the inside airtemperature and sends that information to the control panel concentration ring assembly a metal assembly located in the water pan in the bottom o...