Henny Penny EEG-143 - Manuals

Model EEG-141, 142, 143, 144 TABLE OF CONTENTS (Continued) Section Page Section 4. LEVEL 1 PROGRAMMING ........................................................................... 4-14-1 Modifying Product Settings .................................................................... 4-14-2 AIF Clock ....

Model EEG-141, 142, 143, 144 1-1. INTRODUCTION The Henny Penny open fryer is a basic unit of food processingequipment designed to cook foods better and easier. The microcomputer-based design helps make this possible. This unit is usedonly in institutional and commercial food service operations, ando...

Model EEG-141, 142, 143, 144 1-4. ASSISTANCE Should you require outside assistance, call your local independentdistributor in your area, or call Henny Penny Corp. at1-800-417-8405 or 1-937-456-8405. 1-5. SAFETY The Henny Penny open fryer has many safety features incorporated.However, the only way to...

Model EEG-141, 142, 143, 144 SECTION 2. INSTALLATION This section provides the installation and unpacking instructions forthe Henny Penny Evolution Elite fryer. Installation of this unit should be performed only by a qualifiedservice technician. Do not puncture the fryer with any objects such as dri...

The proper location of the fryer is very important for operation,speed, and convenience. The location of the open fryer shouldallow clearances for servicing and proper operation. Choose alocation which will provide easy loading and unloading withoutinterfering with the final assembly of food orders....

Model EEG-141, 142, 143, 144 2-6. GAS SUPPLY (Continued) • The fryer and its manual shutoff valve must be disconnected from the gas supply piping system duringany pressure testing of that system at test pressures inexcess of 1/2 PSIG (3.45 kPa) (34.5 mbar).• The fryer must be isolated from the gas s...

Model EEG-141, 142, 143, 144 Figure 3-1 3-1 1009 SECTION 3. OPERATION 3-1. OPERATING COMPONENTS Refer to explanations on the next pages. 1 2 6 4 5 7 3 8 9 13 11 12 14 10 Figure 3-2 15 16 17 Figure 3-3 Figure 3-4 (Bulk Oil Supply Fryers Only)

Model EEG-141, 142, 143, 144 6. If the oil has not pumped back to the proper level in the vat during the SmartFilter Express™ process, press X button for NO and pump runs for another 30 seconds. 7. Display shows “IS POT FILLED?” “YES NO”. Make sure vat is full and then press √√√√√ button and display...

Model EEG-141, 142, 143, 144 3-15. CHANGING THE FILTER PAD In order to assure good oil pumping performance, the filter pad (orpaper) should be changed at least once per day. If the filter pad has not been changed, a reminder shows on thedisplay, “CHANGE PAD”. Press √√√√√ button to cancel the message...

Model EEG-141, 142, 143, 144 3-15. CHANGING THE FILTER PAD (Continued) 5. Remove the filter pad retaining ring and clean thoroughly with soap and water. Rinse thoroughly with hot water. Figure 5. 6. Pull the filter pad from the pan and discard pad. Figure 6. 7. Remove the bottom screen from pan and ...

Model EEG-141, 142, 143, 144 3-15. CHANGING THE FILTER PAD (Continued) Be sure that the drain pan, bottom screen, crumb catcher,and the retaining ring are thoroughly dry before placing filterpad into pan as water will dissolve the filter pad. 9. Reassemble in reverse order, placing the bottom screen...

Model EEG-141, 142, 143, 144 3-21 609 Display shows “IS DISPOSAL UNIT IN PLACE?” “YESNO”. If “NO” is selected, display shows “INSERT DISPOSALUNIT”. Once disposal unit is in place press √√√√√ button for YES, open drain, and display shows “DRAINING” and oil drainsfrom vat. Display then shows “VAT EMTY...

Model EEG-141, 142, 143, 144 609 3-22 11. Return empty filter drain pan to fryer and press √√√√√ button. Display then shows “VAT EMTY” “YES NO”. 12. Once vat is empty, press √√√√√ button and display shows “SCRUB VAT COMPLETE” “YES NO”. Use brush and scour pad toclean vat, if needed. Do not use steel...

Model EEG-141, 142, 143, 144 609 4-1 SECTION 4. INFORMATION MODE This historic information can be recorded and used for operationaland technical help and allows you to view the following: • 1. E-LOG• 2. LAST LOAD• 3. DAILY STATS• 4. OIL STATS• 5. REVIEW USAGE• 6. INPUTS• 7. OUTPUTS• 8. OIL TEMP Not ...

Model EEG-141, 142, 143, 144 4-2 609 2. LAST LOAD (Information on recent cook cycles) Press and “2. LAST LOAD” show in displays. Press a timer button or for the product you want to view the cook data and the LED flashes. Press button to start viewing the cook data. For example, if the left LED is fl...

Model EEG-141, 142, 143, 144 Mixed Filter Tracking Filter After X Number of Loads 13b. Press button until “FILTER AFTER...” flashes in the left display along, and the number of cook cycles between filtersshows in the right display. Press the product buttons, or theand buttons, to change this value o...

Model EEG-141, 142, 143, 144 Filter Tracking Mode (SP-8) Filter Tracking signals the operator when the oil needs filtering bycounting the number Cook Cycles between filters Press button and “SP-8” and “FILTER TRACKING MODE” show in the display. Use the andbuttons to choose either “1.MIXED” filter tr...

Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Filter Tracking Mode (SP-8) (Continued) GLOBAL If GLOBAL is selected, press button. Split VatIf unit is a split vat, “SP-8A” and “LEFT VAT FILTERCYCLES” shows in the left display, and the number of cookcycles between filters shows on...

Model EEG-141, 142, 143, 144 7-1. TROUBLE SHOOTING GUIDE (Continued) Oil foaming or boilingover top of vat Oil will notdrain from vat Filter motor runs butpumps oil slowly Bubbles in oil duringentire filtering process Filter motor will not run Problem Cause Correction • Water in oil• Improper or bad...