Page 2 - Henny Penny
Henny Penny Model CMC/CMR-103,104,105,106,107 Figure 3-1 3 2 1 4 5 303 3-2 3-2. OPERATING CONTROLS (Continued)
Page 3 - Turn power switch to ON position.
Henny Penny Model CMC/CMR-103,104,105,106,107 3-3. BASIC OPERATION 1. Turn power switch to ON position. 2. Wait for temperature to reach operating temperature,34 to 38° F (1.1 to 3.3° C). 3. Place chilled product into case. Do not block the air return and air discharge vents withproduct. Product tem...
Page 4 - Clean interior surfaces with a soft cloth, soap and water.
Henny Penny Model CMC/CMR-103,104,105,106,107 3-4. CLEANING Every 3 Months: (Continued) 1. Remove all electrical power supplied to the unit by unpluggingthe power cord from the wall, or by turning off the wall circuitbreaker. 2. Remove all product from the unit. 3. Remove the riser and trays from th...
Page 5 - Temperature Setpoint
Henny Penny Model CMC/CMR-103,104,105,106,107 3-5. PROGRAMMING 1. Press and hold for 4 seconds. The “DEF/SET” light flashes in display. Temperature Setpoint 2. Press the or to change the temperature setpoint, within 5 seconds. After 5 seconds, the last entered setpointstays in memory. Other Paramete...
Page 6 - Continued
Henny Penny Model CMC/CMR-103,104,105,106,107 3-5. PROGRAMMING dS: defrost system (computation); dF=digifrost Feature; Continued defrost start time based on total compressor running timert=real time; defrost start frequency, based on real time dI: defrost interval; defrost frequency in hours, based ...
Page 7 - UL Units; Remove the bulb guard caps.; CE Units; Remove the bulb cover.
Henny Penny Model CMC/CMR-103,104,105,106,107 3-6. FLUORESCENT BULB UL Units REPLACEMENT 1. Pull the bulb out of the sockets. 2. Remove the bulb guard caps. 3. Install new fluorescent bulb in reverse order. CE Units 1. Remove the bulb cover. 2. Rotate the bulb. 3. Pull the lamp out of the sockets. 4...