Havis-Shields KK-K9-C13-K-32 - Manuals

Havis-Shields KK-K9-C13-K-32 – Manual in PDF format online.

Manuals:

Manual Havis-Shields KK-K9-C13-K-32

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - REMOVE REAR OEM DOOR PANELS:; Attach in subassembly to Main Housing Floor

KK-K9-C13-K-32_INST_11-08 2 INSTALLATION: 1. REMOVE INTERIOR: • Remove rear seats and seat belts. • Remove top, side, and bottom plastic rear trim caps 2. REMOVE REAR OEM DOOR PANELS: • Remove speaker, door handle, and lock • Remove switch assembly from plastic housing (leave plug on switch) Note: I...

Page 3 - INSTALL MOUNTING LEGS:; Note: Use one OEM nut as a spacer under the plate.; SLIDE IN K9 MAIN HOUSING:; Slide in main housing; INSTALL TUNNELS AND FILLERS:

KK-K9-C13-K-32_INST_11-08 3 3. INSTALL MOUNTING LEGS: • Using ¼-20 x ¾” Carriage bolts attach mounting legs to hold down plates. • Loosely attach hold down plates to floor using existing seat mounting studs and nuts used to hold down seats. Note: Use one OEM nut as a spacer under the plate. 4. SLIDE...

Page 4 - HOUSING FINAL STEP; Center housing so tunnels are even on both sides.; DOOR PANELS AND WINDOW GUARDS:; Attach to doors using #10 x 3⁄4” Stainless Sheet Metal Screws; Top Mounting; Refrigerant

KK-K9-C13-K-32_INST_11-08 4 6. HOUSING FINAL STEP • Center housing so tunnels are even on both sides. • Mount rear housing adapter plate. This piece is 10” long and the width of the housing. • Drill and mount plate to housing using ¼ x ¾” Stainless Carriage bolts and serrated nuts. Note: Carriage bo...

Havis-Shields Manuals