Grandstream Networks HT702 - Manuals

Grandstream Networks HT702 – Manual in PDF format online.

Manuals:

Manual

Manual Grandstream Networks HT702

Summary

Page 2 - FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL; HT70X USER MANUAL

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 2 of 52 HT70X USER MANUAL INDEX GNU GPL INFORMATION .......................................................................... 5 CHANGE LOG ............................................................................................. 6 CHANGES FROM 1.0...

Page 4 - GUI

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 4 of 52 T ABLE OF F IGURES HT70X USER MANUAL FIGURE 1: CONNECTING THE HT70X .................................................................................................... 10 FIGURE 2: HT70X CONNECTION DIAGRAM ........................................

Page 5 - GNU GPL INFORMATION; License (GPL) for the exact terms and conditions of the license.

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 5 of 52 GNU GPL INFORMATION HT70X firmware contains third-party software licensed under the GNU General Public License (GPL). Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public License (GPL) for the exact t...

Page 6 - CHANGE LOG

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 6 of 52 CHANGE LOG This section documents significant changes from previous versions of HT70X user manuals. Only major new features or major document updates are listed here. Minor updates for corrections or editing are not documented here. CHANGES FRO...

Page 7 - WELCOME; account per FXS port.; SAFETY COMPLIANCES; warranty

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 7 of 52 WELCOME Thank you for purchasing Grandstream’s HT70X, the affordable, feature rich Analog Telephone Adaptor. Grandstream HandyTone70X is a new addition to the popular HandyTone ATA product family. It features the rich audio quality, a broad ran...

Page 8 - your reference here:

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 8 of 52  This document contains links to HT70X GUI Interfaces. Please download these examples for your reference here: http://www.grandstream.com/products/ht_series/ht701/documents/ht70x_gui.zip  This document is subject to change without notice. The...

Page 9 - CONNECT YOUR HT70X; EQUIPMENT PACKAGING

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 9 of 52 CONNECT YOUR HT70X Connecting the HT70X is easy. Before you begin, please verify the contents of the HT70X package. EQUIPMENT PACKAGING The HT70X ATA package contains:  One HT70X Main Case  One Universal Power Adaptor  One Ethernet Cable  O...

Page 10 - RESET; and; POWER LED

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 10 of 52 HT702 HT704 FIGURE 1: DIAGRAM OF HT70X TABLE 1: DEFINITIONS OF THE HT70X CONNECTORS DC 12V Power adapter connection Internet Port (RJ-45) Connect to the internal LAN network. (HT701 Only) LAN Port (RJ-45) Connect to the internal LAN network. (...

Page 11 - PHONE LED; All LEDs display green when ON

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 11 of 52 PHONE LED Indicate status of the respective FXS Ports-PHONE on the back panel Unregistered – OFF Registered and Available – ON (Solid Green) Off-Hook / Busy – Blinking every second Slow blinking FXS LEDs indicates voicemail NOTE: All LEDs disp...

Page 12 - LAN

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 12 of 52 LED-13 Receiver off hook test fail. One or more phones are off hook on phone line during test. Phone 0.25sec ON/ 0.25sec OFF LED-14 REN test failed – high REN detected. Too many parallel phones connected to phone line X Phone 0.25sec ON/ 0.25s...

Page 13 - HT70X FEATRUES; SOFTWARE FEATURES OVERVIEW; Supports Voice Codecs:

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 13 of 52 HT70X FEATRUES The HT70X is a full feature voice and fax-over IP device that offers a high-level of integration including a 10M/100Mbps network port and one FXS telephone port, market-leading sound quality, rich functionalities, and a compact ...

Page 15 - HARDWARE SPECIFICATION

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 15 of 52 HARDWARE SPECIFICATION The table below lists the Hardware and Technical specification of HT70X. TABLE 5: HT70X HARDWARE AND TECHNICAL SPECIFICATIONS HT701 HT702 HT704 Telephone Interfaces 1 RJ11 FXS port 2 RJ11 FXS ports 4 RJ11 FXS ports Netwo...

Page 16 - BASIC OPERATIONS; UNDERSTANDING HT70X VOICE PROMPT; button work with any of the FXS port. P; MENU; Static IP Mode; You need to

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 16 of 52 BASIC OPERATIONS UNDERSTANDING HT70X VOICE PROMPT HT70X has a built-in voice prompt menu for simple device configuration. The IVR menu and the LED button work with any of the FXS port. P ick up the handset and dial “ *** ” to use the IVR menu....

Page 17 - TFTP; Make a Direct IP Call; Restore Factory Default Setting; Five Success Tips when using the Voice Prompt; “*” shifts down to the next menu option

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 17 of 52 toggle between TFTP / HTTP / HTTPS 16 Firmware Version Firmware version information. 17 Firmware Upgrade Firmware upgrade mode. Press “ 9 ” to toggle among the following three options: - always check - check when pre/suffix changes - never upg...

Page 18 - PLACING A PHONE CALL; PHONE OR EXTENSION NUMBERS

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 18 of 52 PLACING A PHONE CALL PHONE OR EXTENSION NUMBERS 1. Dial the number directly and wait for 4 seconds (Default “No Key Entry Timeout”); or 2. Dial the number directly and pres s # (Use # as dial key” must be configured in web configuration). Exam...

Page 19 - Examples of Direct IP Calls:; CALL HOLD; BLIND TRANSFER; Blind Transfer; FLASH; Enable Call Feature

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 19 of 52 Destination ports can be specified using “ * ” (encoding for “:”) followed by the port number. Examples of Direct IP Calls: a) If the target IP address is 192.168.0.160, the dialing convention is *47 or Voice Prompt with option 47, then 192*16...

Page 20 - ATTENDED TRANSFER; Attend Transfer

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 20 of 52 Caller A can place a call on hold and wait for one of three situations: 1. A quick confirmation tone (similar to call waiting tone) followed by a dial-tone. This indicates the transfer is successful (transferee has received a 200 OK from trans...

Page 21 - If C does not answer the call, A can press FLASH back to talk to B.; FAX SUPPORT

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 21 of 52 3. If C answers the call, then A presses FLASH to bring B, C in the conference. 4. If C does not answer the call, A can press FLASH back to talk to B. 5. If A presses FLASH during conference, C will be dropped out. 6. If A hangs up, the confer...

Page 22 - CALL FEATURES; KEY

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 22 of 52 CALL FEATURES The HT70X supports all the traditional and advanced telephony features. TABLE 7: HT70X CALL FEATURES KEY CALL FEATURES *02 Forcing a Codec (per call) *027110 (PCMU), *027111 (PCMA), *02723 (G723), *02729 (G729), *0272616 (G726-r1...

Page 23 - Cancel Delayed Call Forward.; will switch to a new channel for a new call.

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 23 of 52 *93 Cancel Delayed Call Forward. To cancel Delayed Call Forward, dial “*93”, wait for dial tone, then hang up. Flash/Hook Toggles between active call and incoming call (call waiting tone). If not in conversation, flash/hook will switch to a ne...

Page 24 - CONFIGURATION GUIDE; CONFIGURING THE HT70X THROUGH VOICE PROMPTS; DHCP; Select voice menu option 01 to enable HT70X to use DHCP.; STATIC; set up IP address, Subnet Mask, Gateway and DNS server respectively.; IP; between TFTP and HTTP.; CONFIGURING THE HT70X VIA WEB BROWSER; Mi

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 24 of 52 CONFIGURATION GUIDE CONFIGURING THE HT70X THROUGH VOICE PROMPTS DHCP M ODE Select voice menu option 01 to enable HT70X to use DHCP. STATIC IP M ODE Select voice menu option 01 to enable HT70X to use STATIC IP mode, then use option 02, 03, 04, ...

Page 25 - ACCESS THE WEB CONFIGURATION MENU; IMPORTANT SETTINGS; NAT SETTINGS; private network

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 25 of 52 ACCESS THE WEB CONFIGURATION MENU 1. Find the IP address of the HT70X using voice prompt menu option 02. 2. Open a web browser, type the IP address. You will see the log in page of the device. Note: • The IVR announces 12 digits IP address, yo...

Page 26 - STUN Server; DTMF Settings are in FXS portX/ProfileX page.; End User Password; maximum length of 25 characters.; Web Port

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 26 of 52 1. STUN Server (under Advanced Settings webpage) Enter a STUN Server IP (or FQDN) that you may have, or look up a free public STUN Server on the internet and enter it on this field. If using Public IP, keep this field blank. 2. Use Random SIP/...

Page 27 - Using the PPPoE feature

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 27 of 52 Telnet Server Default is set to YES. IP Address There are two modes to operate the HT70X: DHCP mode : all the field values for the Static IP mode are not used (even though they are still saved in the Flash memory.) The HT701 acquires its IP ad...

Page 29 - This number is always used for firmware; admin

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 29 of 52 Product Model This field contains the product model info. Hardware Version This field shows the hardware revision of the unit and the part number. Software Version Program: This is the main software release. This number is always used for firm...

Page 34 - Example

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 34 of 52 Syslog Level Select the HT701 to report the log level. Default is NONE. The level is one of EXTRA DEBUG, DEBUG, INFO, WARNING or ERROR. Syslog messages are sent based on the following events: 1. product model/version on boot up (INFO level) 2....

Page 36 - with no specified STUN server

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 36 of 52 environments. If symmetric NAT is detected, STUN will not work and ONLY outbound proxy can correct the problem. SIP transport User can select UDP or TCP or TLS. Default is UDP. NAT Traversal (STUN) This parameter defines whether or not the HT7...

Page 37 - originator will transfer other parties to

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 37 of 52 calls. Register Expiration This parameter allows the user to specify the time frequency (in minutes) the HT70X refreshes its registration with the specified registrar. The default interval is 60 minutes (or 1 hour). The maximum interval is 655...

Page 40 - Explanation

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 40 of 52 seconds have elapsed if the user forgets to press the “Re-Dial” button. The “Yes” option should be used ONLY if there is a SIP proxy configured and the proxy server supports 484 Incomplete Address response. Otherwise, the call will likely be r...

Page 45 - and Port; Sip port that will be annexed to the IP address above.; SAVING THE CONFIGURATION CHANGES; changes take effect.; REBOOTING THE HT70X FROM REMOTE; will first request

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 45 of 52 and Port Sip port that will be annexed to the IP address above. SAVING THE CONFIGURATION CHANGES Click the “Update” button in the Configuration page to save the changes to the HT70X configuration. The following screen confirms that the changes...

Page 46 - available for download from

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 46 of 52 Grandstream also provides a configuration tool to facilitate the task of generating device configuration files. The Grandstream configuration tool is free to end users. The tool and configuration templates are available for download from http:...

Page 47 - SOFTWARE UPGRADE; FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 47 of 52 SOFTWARE UPGRADE Software upgrade can be done via either TFTP or HTTP. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page. FIRMWARE UPGRADE THROUGH TFTP/HTTP/HTTPS To upgrade via TFTP or HTTP/HTTPS , the “...

Page 48 - locally in a controlled LAN environment.; Note; INSTRUCTIONS FOR UPLOAD FROM LOCAL DIRECTORY:

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 48 of 52 environment if possible. For users who do not have a local firmware upgrade server, Grandstream provides a NAT-friendly TFTP server on the public Internet for firmware upgrade.  Grandstream’s latest firmware is available at http://www.grandst...

Page 49 - CONFIGURATION FILE DOWNLOAD

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 49 of 52 CONFIGURATION FILE DOWNLOAD Grandstream SIP Device can be configured via Web Interface as well as via Configuration File through TFTP or HTTP/HTTPS . “Config Server Path” is the TFTP or HTTP/HTTPS server path for configuration file. It needs t...

Page 50 - No

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 50 of 52 different intervals in P193 for different devices, Server Provider can spread the Firmware or Configuration File download in minutes to reduce the Firmware or Provisioning Server load at any given time. Automatic Upgrade: No Yes, every minutes...

Page 51 - RESTORE FACTORY DEFAULT SETTING; to your VoIP service provider.; FACTORY RESET; Reset default factory settings following these four (4) steps:; IVR Command; Reset default factory settings using the IVR Prompt (Table 5):; Encode the MAC Address

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 51 of 52 RESTORE FACTORY DEFAULT SETTING WARNING! Restoring the Factory Default Setting will DELETE all configuration information of the phone. Please BACKUP or PRINT out all the settings before you approach to following steps. Grandstream will not tak...

Page 52 - For example; Full Reset; : This will make a full reset; ISP Data; Factory Reset will be disabled if the “; Lock keypad update

FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 52 of 52 E: 333 F: 3333 For example : if the MAC address is 000 b 8200 e 395, it should be keyed in as “000 222 8200 333 395”. Reset from web interface (Reset Type) 1. From the Advanced Settings Page user can select three types:  Full Reset : This wil...