Grandstream Networks HT503 - Manual

Grandstream Networks HT503

Grandstream Networks HT503 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
Page: / 14

Table of Contents:

  • Page 2 – Configuration; Figure 0: Application Network Schema
  • Page 3 – O port will show “Idle” meaning the line is ready to calls.; NO IP DUPLICATION; in the network when using static IP otherwise none will work.; GS Surveillance Box:
  • Page 5 – Yes; box therefore you can put ANY digits here.
  • Page 6 – Wait for Dial Tone, 2 Stage Dialing suggested.
  • Page 8 – Surveillance Device Scenario (GXV3XXX IPC or DVS); IP Address Setting of Surveillance Products; ) User ID can be ANY digits as no SIP server credential exists.
  • Page 9 – Figure 2-3: SIP Configuration of Surveillance Products
  • Page 10 – Figure 2-4: Motion Detection Configuration
  • Page 11 – Figure 2-5: Motion Detection Configuration; he “Test” icon to check whether the
  • Page 13 – Verification; to make sure that email is NOT blocked or put into junk mail).; Figure 3-1: Check back the Surveillance Device
  • Page 14 – Figure 3-2: Check Snapshot of the Surveillance Device
Loading the manual

1

Surveillance Solution

– How To Do It?

Grandstream has a full series of products for VoIP, Video and Surveillance. This article explains how to
configure a surveillance solution for residential users or small enterprise users.

The main purpose of such application is to ENHANCE your alarm system, avoid the unnecessary false alarm
which could be expensive because of law enforcement involved (just two or three such false alarm will cover
the cost of the whole equipment investment). Also in some degree, this solution will help user to reduce the re-
occurring monthly charge of security service.

Pre-Request:

1) Home Computer Network and PSTN line (similar POTS line)

2) HT503 and GXV3615 (or ANY model of Grandstream surveillance product)

3) Smartphone with Internet connection

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Configuration; Figure 0: Application Network Schema

2 Configuration The solution is based on IP or computer network, therefore static IP is suggested. If the router used support static DHCP, then DHCP can also be used as long as the IP will NOT change after the router and device reboot. Assume the user already has a home computer network or LAN in th...

Page 3 - O port will show “Idle” meaning the line is ready to calls.; NO IP DUPLICATION; in the network when using static IP otherwise none will work.; GS Surveillance Box:

3 1. HT-503 Scenario The HT503 is the key device here to connect the IP to PSTN world. The motion trigged alarm from surveillance camera is converted to a call sent out via HT503 to the user desired PSTN number, like cell phone. User will hear siren when receiving the call. If email is configured in...

Page 5 - Yes; box therefore you can put ANY digits here.

5 Figure 1-4: HT503 FXO Port Configuration Below (Figure 1-4) is the FXO Port related configuration. Please configure only the mentioned parameters and do not change and leave all other parameters as default:  Account Active: Yes  SIP User ID: Use any digits you want. HT503 just need some digits h...

Other Grandstream Networks Models

All Grandstream Networks Other