Fujitsu LQFP-64P - Manuals - manualsarea.com

Page 2 - PREFACE; to a; Handling and usage; DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL; Caution of the products described in this manual; CAUTION; ) on the NQPACK mounted on the user system with the index mark (; Damage

i PREFACE Thank you for purchasing the LQFP-64P* 1 header type 2 (MB2198-304) for the DSU-FR emulator. This product is used together with the BGA-660P adapter for the DSU-FR emulator (MB2198-300)* 2 to connect the DSU-FR emulator (MB2198-01)* 3 and DSU-FR cable (MB2198-10)* 4 to a user system that u...

Page 4 - Checking the Delivered Product; Screws for securing the header board (M2; Handling Precautions; Handling precautions

1 1. Checking the Delivered Product Before using the MB2198-304, confirm that the following components are included in the box: • LQFP-64P header board* 1 : 1 • Screws for securing the header board (M2 × 10mm, 0.4mm pitch) : 4 • Washers : 4 • NQPACK064SB* 2 : 1 • HQPACK064SB140* 3 : 1 • Operation ma...

Page 5 - Notes on Designing; Notes on designing the printed circuit board for the user system; Figure 1 Header board dimensions

2 3. Notes on Designing ■ Notes on designing the printed circuit board for the user system If the header board is connected to a user system, the heights of parts mounted around the header board are restricted.When designing the printed circuit board of the user system, consider the heights of compo...

Page 6 - MCU footprint design notes; ) for the screw for affixing the IC socket when the NQPACK064SB-SL

3 ■ MCU footprint design notes Figure 2 shows the recommended dimensions of the NQPACK footprint mounted on the printed cir-cuit board of the user system. The printed circuit board of the user system must be designed with due consideration given to thisfootprint as well as to the mass production MCU...

Page 7 - Procedure for Connecting to the User System; Connecting; the NQPACK mounted on the user system with the index mark (

4 4. Procedure for Connecting to the User System Before using the MB2198-304, mount the supplied NQPACK on the user system. Connect the header board directly to the adapter. Refer to the operation manual of the adapter fordetails on how to connect the adapter. ■ Connecting 1. To connect the header b...

Page 8 - Disconnection

5 Figure 4 Header board connection ■ Disconnection To disconnect the header board from the user system, remove all four screws, and then pull the header board straight out of the NQPACK. Screws for securing the header board Washer Header board User system YQPACK NQPACK

Page 9 - Mounting Mass Production MCUs; Mounting; mounted on the user system with the index mark (; HQPACK

6 5. Mounting Mass Production MCUs Use the supplied HQPACK to mount a mass production MCU on the user system. ■ Mounting 1. To mount a mass production MCU on the user system, align the index mark ( ▲ ) on the NQPACK mounted on the user system with the index mark ( ● ) on the mass production MCU. 2. ...

Page 10 - Connector Pin Assignment; Pin assignment; The mass production MCU power supply (VCC) pin numbers are 16 and 48.

7 6. Connector Pin Assignment The signals from the evaluation MCU mounted on the adapter board are connected to the YQPACK(the same assignments as mass production MCU) via adapter I/F connectors 1 and 2 on the headerboard.For details on the mass production MCU pins, refer to the data sheet or hardwa...