Fujitsu LQFP-64P - Manual
Fujitsu LQFP-64P – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PREFACE; to a; Handling and usage; DSU-FR EMULATOR MB2198-01 HARDWARE MANUAL; Caution of the products described in this manual; CAUTION; ) on the NQPACK mounted on the user system with the index mark (; Damage
- Page 4 – Checking the Delivered Product; Screws for securing the header board (M2; Handling Precautions; Handling precautions
- Page 5 – Notes on Designing; Notes on designing the printed circuit board for the user system; Figure 1 Header board dimensions
- Page 6 – MCU footprint design notes; ) for the screw for affixing the IC socket when the NQPACK064SB-SL
- Page 7 – Procedure for Connecting to the User System; Connecting; the NQPACK mounted on the user system with the index mark (
- Page 8 – Disconnection
- Page 9 – Mounting Mass Production MCUs; Mounting; mounted on the user system with the index mark (; HQPACK
- Page 10 – Connector Pin Assignment; Pin assignment; The mass production MCU power supply (VCC) pin numbers are 16 and 48.
FUJITSU SEMICONDUCTOR
SUPPORT SYSTEM
SS01-71060-1E
DSU-FR EMULATOR
LQFP-64P HEADER TYPE 2
MB2198-304
OPERATION MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
i PREFACE Thank you for purchasing the LQFP-64P* 1 header type 2 (MB2198-304) for the DSU-FR emulator. This product is used together with the BGA-660P adapter for the DSU-FR emulator (MB2198-300)* 2 to connect the DSU-FR emulator (MB2198-01)* 3 and DSU-FR cable (MB2198-10)* 4 to a user system that u...
1 1. Checking the Delivered Product Before using the MB2198-304, confirm that the following components are included in the box: • LQFP-64P header board* 1 : 1 • Screws for securing the header board (M2 × 10mm, 0.4mm pitch) : 4 • Washers : 4 • NQPACK064SB* 2 : 1 • HQPACK064SB140* 3 : 1 • Operation ma...
2 3. Notes on Designing ■ Notes on designing the printed circuit board for the user system If the header board is connected to a user system, the heights of parts mounted around the header board are restricted.When designing the printed circuit board of the user system, consider the heights of compo...
