Fujitsu FTP-607 Series - Manual
Fujitsu FTP-607 Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Cutter; Specifications
- Page 3 – SPeCiFiCaTiONS
- Page 6 – CN; eries
- Page 9 – Fujitsu Components International Headquarter Offices
FTP-627MCL401/601
n
Overview
The FTP-627 MCL Series are 24V driven high-speed printers
with a ultra low profile auto cutter and long life.
The FTP-627 MCL Series can be used for a variety of
applications, such as POS terminals, ticket vending machines,
label printers, banking terminals, and measurement and
medical equipment.
n
HiGHLiGHTS
• Ultra low profile
Height 21.8 mm, width 81.2 mm, depth 42.2 mm
• High speed printing
It can print at 100/150 mm/s (800/1,200 dotlines/s)
maximum by using Fujitsu's unique head drive control.
• Auto Cutter
Long life and high reliable guilotine with dedicated motor.
• Easy paper setting
Our lever platen release mechanism allows a
wide paper route, so paper can be easily inserted.
Conventional auto loading is also available.
• Multifunctional die-cast frame
Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.
• RoHS compliant
24v driveN, FTP-607 S
eries
2” HiGH SPeed THerMaL PriNTer
FTP-627MCL401/601
FTP-627DSL291R
FTP-627DSL601R
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 FTP-627MCL401/601 n ParT NuMberS n SPeCiFiCaTiONS Part Number Easy Load Model with low profile cutter FTP-627MCL401 FTP-627MCL601 LSI for driving MCL401 FTP-627CU301R MCL601 FTP-627CU601R Interface board for Mech/Cutter Cutter supported MCL401 FTP-627DSL291R Parallel (Centronics) /Serial (RS-232C)...
FTP-627MCL401/601 *+5˚C to +40˚C printing density assurance rance. Item Specification Iterface Conforms to RS232C/Centronics / USB Power supply For print head MCL401 24 VDC average current, 0.4A (0.9 A peak) (print ratio: 12.5%, print speed 100mm/sec.) MCL601 24 VDC average current 0.5 A (0.9 A peak...
6 FTP-627MCL401/601 Name Functions Remarks Note CN +24V power supply connector Connection for +24V power supply CN2 RS-232C Connection for serial interface CN USB I/F connector Connection for USB interface CN4 - Connection for thermal head + paper feed motor 2-inch, 30 pin CN5 Cutter connector Conne...
