Fujitsu FPCCC48 - Manuals

2 • If you use a pen tether, attach it to one of the D-rings on the back of the case. Figure 1. Tablet PC HEC - Front Installing the Tablet PC in the HEC To install your Tablet PC into the HEC, position the case horizontally as shown in Figure 2. Unzip the long zipper that runs along two sides of th...

3 Figure 2. Opening the Tablet PC HEC If you are using a system with a standard battery installed, leave in place the foam bumper that is attached with a Velcro strip on the inside of the case (see Figure 2 for location). If you are using a system with a high-capacity battery installed, remove the f...

4 Figure 3. Tablet PC HEC - Top Installing a PC Card, Memory Stick™, or SD Card To install a PC Card, Memory Stick, or SD card while the system is installed in the HEC, unzip the short zipper located on the top edge of the HEC to gain access to the slots (See Figure 3). After you have installed the ...