Fujitsu FCN-086 - Manuals - manualsarea.com

Page 2 - materials; Plating; characteristics; material; Near end cross talk; speciFications

2 Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change n conFiguration oF F&t 2 mm h.m. connector 1. Basic configuration of socket/plugThere are five types of sockets: three basic types: type A (110 contacts), type B (125 contacts), an...

Page 3 - nations allow 20 types of terminals.; terminal conFiguration oF plug; Contact length

Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change The contact pins have a three-level sequence structure and can be connected/disconnected in an ac- tive state. The terminal side can support various applications with four types of lengt...

Page 5 - transmission characteristics; PC board part PC board part PC board part; ti

5 Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change n transmission characteristics The transmission characteristics were designed to an optimum level by repeating various transmission characteristics simulations when the structure was d...

Page 6 - standard and hot sWap part numbers; computer telephony part numbers

Fcn-086 /087 series compact pci / Vme 6-6 Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change n standard and hot sWap part numbers Coding Keys for Daughter Card Coding Keys for Midplane/Backplane Backplane P5 P4 P1 P2 P3 M ale Pin H eaders J5 J4 J1 J2 J3 160....

Page 7 - Drill hole Diameter:

Fcn-086 /087 series compact pci / Vme 6-7 Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change Unit: mm (in.) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: φ 0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): φ 0.6 ±0.05 mm (.02...

Page 11 - P5 TYPE B FEEd THRU COmPUTER TELEPHONY CONNECTOR

Fcn-086 /087 series compact pci / Vme 6- Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change Unit: mm (in.) Thickness: 1.4 to 5.6 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024) ...

Page 14 - mm

Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change Unit: mm (in.) Unit: mm (in.) Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: Ø0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): Ø0.6 ±0.05 mm (.024) socKe...

Page 15 - bottom shield plate)

15 Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change Unit: mm (in.) Thickness: 1.4 to 2.0 mm (.055 to .220 in.) Drill hole Diameter: ∅ 0.7 ±0.025 mm (.028 in.) Through hole diameter (after plating): ∅ 0.6 ±0.05 mm (.024) socKet: 0 conta...

Page 17 - Olive yellow

7 Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change coding Key n dimensions n ordering part number: 8.9 (0.350) 2. 2 (0.087) 5.75 (0.226) 6.55 (0.258) 2. 9 (0.1 14 ) 7. 9 (0.3 11 ) 3.15 (0.124) 2.35 (0.093) 6. 1 (0.240) 9.2 (0.362) 2 (0...

Page 18 - Fujitsu Components International Headquarter Offices

8 Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected]...