Fujitsu FCN-086 - Manual
Fujitsu FCN-086 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – materials; Plating; characteristics; material; Near end cross talk; speciFications
- Page 3 – nations allow 20 types of terminals.; terminal conFiguration oF plug; Contact length
- Page 5 – transmission characteristics; PC board part PC board part PC board part; ti
- Page 6 – standard and hot sWap part numbers; computer telephony part numbers
- Page 7 – Drill hole Diameter:
- Page 11 – P5 TYPE B FEEd THRU COmPUTER TELEPHONY CONNECTOR
- Page 14 – mm
- Page 15 – bottom shield plate)
- Page 17 – Olive yellow
- Page 18 – Fujitsu Components International Headquarter Offices
2mm pitch metric connectors
For pcb connection
Fcn-086 /087 series
n
oVerVieW
Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards
developed to support high-speed transmission/high density packaging of communication equipment,
conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor
1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and
matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics.
Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost effective.
Insertion connections are completely unnecessary since a polarity key is supported.
Plug contact has a four level sequence structure that makes connection/disconnection in an active state
possible. Terminals have a five level pin length to support various applications. New customized connectors
can be supported by freely combining the pin lengths of contacts and terminals.
For shield plate products, which support high-speed transmission based on standard products, 5 row 55,
95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate
corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also
be shipped with shields pre-attached.
8 row products are also in the series. Consult factory for your requirements.
Fujitsu has developed a new high density power connector (25% denser) to improve operability.
A double press fit, which can connect two printed boards with one connector, greatly contributes to
improved mounting and decreasing cost. Consult factory for details.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change n conFiguration oF F&t 2 mm h.m. connector 1. Basic configuration of socket/plugThere are five types of sockets: three basic types: type A (110 contacts), type B (125 contacts), an...
Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change The contact pins have a three-level sequence structure and can be connected/disconnected in an ac- tive state. The terminal side can support various applications with four types of lengt...
5 Fcn-086 / 087 series Dimensions are in millimeters (inches) www.fcai.fujitsu.com Specifications subject to change n transmission characteristics The transmission characteristics were designed to an optimum level by repeating various transmission characteristics simulations when the structure was d...
