Falmec FP3MLD90S2-EW1140 - Manuals

Page 2 - CONGRATULATIONS; IMPORTANT INFORMATION; ENVIRONMENTAL TIP

2 CONGRATULATIONS Congratulations and thank you for choosing a Falmec rangehood. To avoid the risks that are always present when you use an electrical appliance it is important that the rangehood is installed correctly and that you read the safety in- structions carefully to avoid misuse and ha- zar...

Page 3 - Main hood housing including control module and lighting; PRODUCT DESCRIPTION & CARTON CONTENTS; CARTON 2 - FAN MOTOR UNIT; You will be supplied with one of the three fan motor; Unit designed to be located in a roof space and then; In Roof Motor Unit; Unit designed to be mounted externally penetrating; Included in the carton:; OPTIONAL ACCESSORIES WHEN ROOF MOUNTING; Includes roof fl ashing for tile roof and mounting brackets x2.; Unit designed to be mounted directly on an external wall.; Included in the carton:

3 CARTON 1 - HOOD UNIT INTEGRATED HOOD - REMOTE MOTOR Models include: MILANO FP3ML60S2, FP3ML90S2, MILANO FP3MLD90S2, FP3MLD12S2 GENOVA FP3GV12S2 Included in the carton: 1. Main hood housing including control module and lighting 2. Baﬄ e fi lters 3. Grease trap 4. Fixing screws 5. Operating & in...

Page 7 - CAUTION

7 600 - 650 mm 2 STEP 1: Minimum distance by cooktop. STEP 2: Wall unit hole. STEP 3: You push the hood in wall unit hole. x4 CAUTION 3 1

Page 8 - You screw the blocking devices.

8 FOR BACK DUCTED POSITION TOP DUCTED POSITION 2 3 1 ATTENTION! ONLY ON MILANO + DEEP 3 FOR BACK DUCTED POSITION TOP DUCTED POSITION 2 3 1 ATTENTION! ONLY ON MILANO + DEEP 3 x4 CAUTION CAUTION 10 ÷ 28 mm 5 5a 4 STEP 4: You screw the blocking devices. STEP 5: Connect the hood outlet (in the top or ba...

Page 10 - SEQUENCE FOR REMOVING THE HOOD

10 2 1 9 8 10 STEP 8: Remove the metal filters. STEP 9: Remove the cover caps. STEP 10: With your finger enter the hole and pull the lever to unlock the stop. SEQUENCE FOR REMOVING THE HOOD

Page 12 - only intended for qualified personnel; TECHNICAL FEATURES; OPERATION; TOUCH PUSHBUTTON PANEL

12 INTENDED USE The equipment is solely intended to be used to extract fumes generated from cooking food in non-professional domestic kitchens: any other use is improper. Improper use can cause damage to persons, things, pets and exempts the Manu- facturer from any liability. This appliance is not i...

Page 13 - ENGLISH; REMOTE CONTROL; SENSOR FUNCTION; AUTOMATIC CYCLE

13 ENGLISH USING THE RADIO CONTROL (OPTIONAL) WARNINGS! Place the hood away from sources of electromagnetic waves (e.g. micro- wave ovens), which could interfere with the radio control and with the hood electronics. The maximum operating distance is 5 metres, that may vary according to the presence ...

Page 14 - MAINTENANCE; CLEANING OF EXTERNAL SURFACES; DISPOSAL AFTER END OF USEFUL LIFE

14 RADIO CONTROL CODE CHANGE With only one radio control, go directly to point 2.With several radio controls in the same room, a new code can be created by following the procedure below. Disconnect the power to the hood before starting the procedure. 1) - CREATE A NEW CODE The procedure is to be car...

Page 15 - PART 1: HOOD INSTALLATION GUIDE; INTEGRATED HOODS - REMOTE MOTOR; INTEGRATED HOOD; WARNING; SERVICING; To Rangehood Unit; Gentle Bend

15 ENGLISH DUCTING & EXTRACTION LEVELS (REMOTE MOTORS ONLY) The Flexi ducting is designed to ensure optimum performance for your range-hood. Please follow the installation instructions carefully.Every FALMEC rangehood must be ducted to the external or in-roof motor unit by the use of non-flammab...

Page 16 - REMOTE MOTOR SOLUTIONS; EXTERNAL ROOF SOLUTION; EXTERNAL WALL SOLUTION

16 REMOTE MOTOR SOLUTIONS EXTERNAL ROOF SOLUTION 765, 1140 & 2010m 3 /h 1. Fan power supply connects to internal hood unit.2. Tile or metal roof flashing (optional accessory).3. Rigid duct mount (optional accessory).4. 200mm flexi ducting (attached to internal hood unit)*. * Advise to include ge...

Page 17 - IN ROOF SOLUTION; Mounting Bracket

17 ENGLISH PART 2: MOTOR INSTALLATION GUIDE IN ROOF SOLUTION Positioning your In-Roof Unit: It is recommended that the In-Roof motor unit be mounted in a roof space or wall cavity. Please ensure that the In-Roof motor unit is positioned in an environ-ment that is free of other gases to enable an eﬃ ...

Page 18 - EXTERNAL ROOF SOLUTION - TILE ROOF INSTALLATION; flexible

18 EXTERNAL ROOF SOLUTION - TILE ROOF INSTALLATION Inspection: Ensure the unit has arrived in good condition and that the impeller will spin freely.This product is designed to be installed on a roof up to 45° pitch. 1. Installation of this product should be carried out by appropriately qualified per...

Page 19 - holes

19 ENGLISH 518 147 450 419 123 360 EW-765 / EW-1140 SPECIFICATIONS EW-2010 SPECIFICATIONS 130 80 162.5 325 298 6.5 4 holes 425 388 6.5 4 holes 170 80 212.5 All measurements in mm All measurements in mm

Page 20 - PROFESSIONAL WARRANTY

20 PROFESSIONAL WARRANTY All FALMEC Professional range hoods come with a 3 year parts and labour war-ranty. PRKS will correct, free of charge, any defects in material or workmanship for the period of 3 years, subject to the terms of our warranty stated below. This warranty will be void if a model fr...