EverFocus EPN3600 - Manuals

Page 3 - About this document; Do not attempt to disassemble the appliance. To prevent electric

EPN3600 3 About this document All the safety and operating instructions should be read and followed before the unit is operated. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve i...

Page 5 - TABLE OF CONTENTS; INTRODUCTION

EPN3600 5 TABLE OF CONTENTS 1. INTRODUCTION ................................................................................................. 7 1.1. FEATURE ..................................................................................................... 7 1.2 ACCESSING THE CAMERA MENU ............

Page 6 - SPECIFICATIONS

EPN3600 6 2.4.2.3.2 OSD/AREAS .............................................................................. 56 2.4.2.3.2.1 Areas ........................................................................................ 57 2.4.2.3.2.2 Directions ..........................................................

Page 9 - ACCESSING THE CAMERA MENU; field of your Internet Explorer browser. (Please refer to; Figure 1-1 Default page of Camera Menu; Press

EPN3600 9 1.2 ACCESSING THE CAMERA MENU Step 1.Start an Internet Explorer browser. Step 2. Enter the IP address or host name of the camera in the Location/Address field of your Internet Explorer browser. (Please refer to EPN2700/3100/3600 Installation Guide for how to find the IP address) Step 3. In...

Page 10 - Video Stream

EPN3600 10 ○ 2 Press button to display the "Live" page. Double click on the image to show a full screen display, double click again or press ESC to return normal display. ○ 3 Press button to enter Setting page. In Setting page, there are 8 sections: [System Info], [User Config], [Network], [...

Page 11 - Click “Open” button to open PTZ control window. (See red maker in; Figure; Click “Close” button to hide PTZ control window.

EPN3600 11 where the image file is saved can be specified in “Setting -> User’s Config”. Please refer to “2.2 USER CONFIG” for further information. Note: Record segment is limited to 1 min. If you need to do long time recording, please set schedule recording. For schedule recording info, please s...

Page 12 - Figure 1-2 PTZ Control Window; Focus near

EPN3600 12 Figure 1-2 PTZ Control Window : Zoom in : Zoom out : Focus far Focus near : Iris + : Iris – Arrow buttons: Click on an arrow button to navigate in that direction. : stop current action. : User can select PTZ speed from High, Standard, Low and Minimum.

Page 15 - Manual Control; – Reset; Status Display; Motion; ” for

EPN3600 15 ○ 17 Manual Control – Reset Alarm Press “Reset Alarm” button to reset alarm output remotely. ○ 18 Status Display Show the name of the camera whose settings currently being configured, current date/time and current frame rate. ○ 19 Event signals When an alarm or motion event is triggered, ...

Page 16 - Click; Setting; button (see red marker in

EPN3600 16 2. SETTING Click Setting button (see red marker in Figure 2-1 ) to enter the setting menu (see Figure 2-2 ). There are 9 sections in setup menu: [System Info], [User Config], [Network], [Video], [Audio], [User], [Event], [System] and [EKB200]. Figure 2-1 Camera Menu- Setting 2.1 SYSTEM IN...

Page 17 - Log message; : contain all information and event message, including login,

EPN3600 17 Figure 2-2 System Info - Information 2.1.2 Log Figure 2-3 System Info -Log System Log: Date/Time : display date and time of the log. Log message : contain all information and event message, including login,

Page 18 - CONFIG; Figure 2-4 User Config; Foreground Color

EPN3600 18 user’s IP, reboot, firmware upgrade, load factory default, configuration reset and event detected. System will keep the newest 256 records. Click button to export system log into a “.txt” file and select the location where the exported log file will be saved to. 2.2 USER CONFIG Figure 2-4...

Page 20 - Language Setting; Apply; to apply the setting changes or; Reset; to reset without saving

EPN3600 20 the change. Language Setting Language: Select the language to be displayed in web page. Default language is English. To add a new language not listed in the original configuration, click the Browse button to locate the new language file (.evb) and then click the Load button. Click Apply t...

Page 21 - IP Type

EPN3600 21 2.3.1 Network Figure 2-5 Network Setting- Network The following information is required to configure the network settings. Contact your network administrator or your internet service provider to get the info. • IP Type • IP address • Subnet mask • Gateway (when using the gateway server/ro...

Page 23 - DDNS setting; Enable

EPN3600 23 2.3.2 DDNS Figure 2-6 Network - DDNS DDNS setting When accessing the camera via the Internet from the network environment of which the global IP address is obtained using DHCP, the DDNS function is necessary. To use the DDNS function, it is necessary to connect to the dedicated DDNS serve...

Page 24 - Figure 2-7 Network – Bandwidth; Bandwidth Setting; : enter a value here to restrict the number of clients

EPN3600 24 Click button to register or update DDNS account.” If you wish to get a domain name from other DDNS provider, it is necessary to configure Record ID, FQDN, Username and password and register in DDNS server. Refer to the DDNS web site for further information about the DDNS. Click Apply to a...

Page 25 - SMTP Server

EPN3600 25 Click Apply to apply the setting changes or Reset to reset without saving the change. 2.3.4 SMTP/FTP Figure 2-8 Network – SMTP/FTP Set SMTP The settings relating to the mail server, used to send the e-mail notification from the camera to predefined addresses via SMTP, can be configured. S...

Page 27 - Figure 2-9 Network – Network Alarm; Set Network Alarm

EPN3600 27 2.3.5 Network Alarm (reserved for PowerCon) Figure 2-9 Network – Network Alarm Set Network Alarm This function is reserved for PowerCon software, for the detailed setting please refer to PowerCon network alarm protocol. 2.4 VIDEO The settings relating to video such as streaming, camera OS...

Page 28 - Figure 2-10 Video – Multi Streaming; Stream Setting; Format

EPN3600 28 2.4.1 Multi Streaming Figure 2-10 Video – Multi Streaming Stream Setting The system can output 3 video streams simultaneously. For each of them, user can set compression format, resolution, quality and frame rate individually. Stream 1 is always enabled for live view. Check “Enable” box t...

Page 29 - Figure 2-11 Video – Camera

EPN3600 29 Click Apply to apply the setting changes or Reset to reset without saving the change. Video Recording Setting User can set video recording by selecting from one of the enabled video streamings. This will allow user to view live images as well as to record video of the other video streamin...

Page 30 - SETTINGS; Preset; User can click Program button to enter “Preset Position” window (See; Figure 2-12 Video – Camera – Preset Window

EPN3600 30 2.4.2.1 POSITION SETTINGS 2.4.2.1.1 Set Preset User can click Program button to enter “Preset Position” window (See Figure 2-12 ) to set different positions for a camera. There are 10 preset positions can be set in one page and totally 20 pages for preset positions. How to preset a positi...

Page 31 - Auto; ) to configure auto tracking options for

EPN3600 31 3. Click “Set” button to save this selected position, or Click “Clear” button to clear this position. “Go” button allow user to see a preset position on screen. 4. User can set Title, Focus Mode and White Balance for each preset position. 5. Click “Apply” button to confirm setting in step...

Page 32 - Figure 2-13 Video – Camera –Auto Tracking Window; How to set Auto Tracking Start point:

EPN3600 32 Figure 2-13 Video – Camera –Auto Tracking Window How to set Auto Tracking Start point: 1. Checking “Auto Tracking Start Point” item at ○ 1 . 2. Select a desired start point by using “Arrow” buttons at ○ 2 to locate a desired position. User can also use “Zoom In/ OUT”, “Focus Far/Near”, “I...

Page 33 - Set Pan/ Tilt Limits; Figure 2-14 Auto Tracking OSD

EPN3600 33 selected start point on screen. Set Pan/ Tilt Limits 1. Set Pan/ Tilt Limits by checking this item and clicking its Set button at ○ 4 to enter its setting window (Figure 2-14). See setting details below. Figure 2-14 Auto Tracking OSD <Set Pan Range> a. Click and at ○ 2 to select Pan...

Page 34 - Figure 2-16 Pan Range Setting – Right Limit Setting; e. Use arrows buttons and

EPN3600 34 Click IRIS-, button to return. Figure 2-16 Pan Range Setting – Right Limit Setting e. Use arrows buttons and buttons to locate a desired right limit point. f. Click IRIS+ button, to save and return, or Click IRIS-, button to return. g. If tracking start point is outside the limits, the sc...

Page 36 - Set tracking mask; Figure 2-19 Tracking Mask Window

EPN3600 36 <Clear Pan/ Clear Tilt> a. Click and to select Clear Pan/ Clear Tilt option. b. Click IRIS+ button, , to clear the setting. Set tracking mask Checking this item at ○ 5 and click its Set button to enter its setting window ( Figure 2-19 ). See setting details below. Figure 2-19 Tracki...

Page 42 - ) to configure auto pan options for a camera.; Figure 2-23 Video – Camera –Auto Pan Window; ON: enable endless mode. The speed dome will perform 360 degree

EPN3600 42 2.4.2.2.2 Set Auto Pan User can click Program button right next to “Set Auto Pan” to enter “Auto Pan” window (See Figure 2-23 ) to configure auto pan options for a camera. How to set Auto Pan: Figure 2-23 Video – Camera –Auto Pan Window 1. Select Endless Mode on or off. ON: enable endless...

Page 44 - Tour; Figure 2-24 Video – Camera –Tour Window; Mode

EPN3600 44 2.4.2.2.3 Set Tour User can click Program button right next to “Set Tour” to enter “Tour” window (See below) to configure preset tours for a camera. Max. 16 positions can be set for a tour and there are 16 tours for user to preset for a camera. Figure 2-24 Video – Camera –Tour Window Mode...

Page 45 - Pattern; Figure 2-25 Video – Camera –Pattern Window; Note: Maximum pattern recording time is 90 seconds. If your record

EPN3600 45 exclusive for Preset mode here. Speed : Select tour speed from 1 ~255. This option is exclusive for Preset mode. 2.4.2.2.4 Set Pattern User can click Program button right next to “Set Pattern” to enter Pattern window (See Figure 2-25 ) to set a pattern for a camera. Figure 2-25 Video – Ca...

Page 46 - Figure 2-26 Video – Camera –Set Pattern - Recording Tour Seconds; Auto Resume; : Return to previous mode, if no action for a period of time.; Resume To; : Select “Resume To” mode for “Auto Resume” function. Available; Auto Flip

EPN3600 46 Figure 2-26 Video – Camera –Set Pattern - Recording Tour Seconds 3. Use “Arrow” buttons, “Zoom In/ OUT”, “Focus Far/Near”, “IRIS +/-“ buttons and “PT Speed” option to operate camera on a desired pattern 4. After completing pattern operations, click “Complete” button to save this pattern t...

Page 47 - as a sample of the main menu.; Figure 2-27 Video – Camera –PTZ OSD Setting- Main menu; button

EPN3600 47 2.4.2.3 PTZ OSD SETTINGS Use the buttons on the browser window to operate the "Camera OSD setting" from a PC. There are 4 entries about PTZ OSD Setting allowing user to configure, including Video Settings, OSD/Areas, Private Zones and Info. See Figure 2-27 . General Operation Guid...

Page 49 - Figure 2-29 Video Settings- Exposure Menu

EPN3600 49 2.4.2.3.1 VIDEO SETTINGS There are 9 options in Video Settings: Exposure, Focus Mode, Digital Zoom, White Balance, Backlight, Day/Night, Color, Negative and Wide Dynamic Range. See Figure 2-28 . 2.4.2.3.1.1 Exposure In Exposure menu, there is a sub-menu. Figure 2-28 Video Settings- Exposu...

Page 50 - to save settings and exit

EPN3600 50 EL.SHUTTER: Select electronic shutter mode from the options of the menu. There are AUTO, A.FLK ,1/1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/180 , 1/250 , 1/1000 , 1/3000 and 1/10000 at NTSC model; and AUTO, A.FLK, 1/50, 1/150, 1/215, 1/1000, 1/2500 and 1/10000 at PAL model. AUTO: Auto electri...

Page 51 - AUTO; and; Manual; Enable the one push trigger focus mode. The focus lens

EPN3600 51 2.4.2.3.1.2 Focus Mode Figure 2-30 Video Settings - Focus Mode In Focus mode, we define focus type from ONE PUSH, AUTO and Manual . ONE PUSH: Enable the one push trigger focus mode. The focus lens holds the same position until the next trigger command is received. This function prevents t...

Page 52 - Figure 2-31 Video Settings - Digital Zoom; Enable or disable digital zoom.; Figure 2-32 Video Settings - White Balance; White Balance has the following modes:

EPN3600 52 2.4.2.3.1.3 Digital Zoom Figure 2-31 Video Settings - Digital Zoom Enable or disable digital zoom. ON: Enable a digital zoom. OFF: Disable a digital zoom. 2.4.2.3.1.4 White Balance Figure 2-32 Video Settings - White Balance White Balance has the following modes: AUTO: in this mode the sys...

Page 54 - NIGHT; Auto Day/Night mode switch. The camera will automatically switch; Figure 2-35 Video Settings - Day/Night – Sensitivity Setting Window

EPN3600 54 Figure 2-34 PTZ Video Settings - Day/Night Select from AUTO, DAY and NIGHT NIGHT: IR cut filter is always removed (ICR ON). DAY: IR cut filter is always attached (ICR OFF). AUTO: Auto Day/Night mode switch. The camera will automatically switch the settings needed for attaching or removing...

Page 56 - Figure 2-38 Video Settings - Wide Dynamic Range; ON

EPN3600 56 2.4.2.3.1.9 Wide Dynamic Range Figure 2-38 Video Settings - Wide Dynamic Range In Wide Dynamic Range, we define wide dynamic range from ON and OFF. This function is effective when shooting images against the sun, or when shooting a very bright subject. ON: Enable wide dynamic range OFF: D...

Page 58 - will appear and Range section (see red marker in

EPN3600 58 Figure 2-41 Areas setting – Left Position Setting Window 5. Then the right position setting window shows (See Figure 2-42 ).User can select right position by directly controlling from the live screen. After select desired left position, press “Enter” to confirm. Figure 2-42 Areas setting ...

Page 59 - Figure 2-43 Areas setting

EPN3600 59 Figure 2-43 Areas setting 2.4.2.3.2.2 Directions In Directions, there is a sub-menu. Figure 2-44 OSD/AREAS menu- Directions Setting Window Click ◄ button/ ► button to enter Directions sub-menu.

Page 60 - Figure 2-45 Areas setting menu- Set North; Set North; Click Enter button to enter set North window (See; Figure 2-46 Areas setting menu – Set North Position Window; Default North

EPN3600 60 Figure 2-45 Areas setting menu- Set North There are two options in Directions menu: Set North and Default North. Set North Click Enter button to enter set North window (See Figure 2-46 ). User can locate a north position by directly controlling from the live screen. After selecting desire...

Page 61 - Figure 2-48 Directions Setting Menu; OSD

EPN3600 61 Figure 2-47 OSD/AREAS menu- Display Setting Window Click ◄ button/ ► button to enter Display sub-menu. Figure 2-48 Directions Setting Menu 1. SHOW OSD ON: show OSD of Camera Title, Directions, Zones, Preset Title, Motion, Zoom, Fan and Camera Status. OFF: do not show OSD. 2 SEC: show OSD ...

Page 63 - ZONES; Figure 2-50 Private Zone Menu; button to select ON on a desired Private Zone No.; Private Zone Position; setting window is displayed.

EPN3600 63 2.4.2.3.3 PRIVATE ZONES User can set a private zone with its position and size. When Private zone is set to on, the private zone will be blocked (black) for view. There are 8 private zones can be set in this system. Figure 2-50 Private Zone Menu How to set private zone: 1. Click ► button ...

Page 64 - Figure 2-51 Private Zone – Position Setting Window; Press Enter to save position and enter next window,; Private Zone Size; ). A small and gray square area showing on; Figure 2-52 Private Zone – Size Setting Window; To adjust the size of private zone, use following buttons:

EPN3600 64 Figure 2-51 Private Zone – Position Setting Window 3. Locate a position for private zone by directly operating from the live screen. 4. Press Enter to save position and enter next window, Private Zone Size setting window (See Figure 2-52 ). A small and gray square area showing on center o...

Page 65 - Figure 2-53 Private Zone – Zone Color

EPN3600 65 Click ▲ button to increase the length of the private zone. Click ▼ button to decrease the length of the private zone. Click ► button to increase the width of the private zone. Click ◄ button to decrease the width of the private zone. Note: Press Cancel button at this step and the system w...

Page 67 - Audio Input

EPN3600 67 Figure 2-56 Audio Audio Check Enable Audio box to enable audio function. Audio Input : Audio from an internal microphone or a line source can be connected to the Audio connector of EPN2700/3100/3600. The audio source can be selected from Internal Microphone, External Audio Input L and Ext...

Page 68 - user information; . Maximum 10 users can be set for; Supervisor/Administrator; –a supervisor/administrator has unrestricted; User; - the lowest level of access, which only allows the user access to the

EPN3600 68 2.6 USER Figure 2-57 User User Information Administrator can set Account, Description, password, Authority level and Status for a user in user information . Maximum 10 users can be set for using the speed dome. There are three different authority levels: • Supervisor/Administrator –a supe...

Page 69 - x x x x; record event video to remote site.

EPN3600 69 Press Apply to apply the setting changes or Reset to reset without saving the change. 2.7 EVENT An event in the camera is when an Event Type is activated and causes certain actions to be performed. The event type is the set of conditions that specifies how and when which actions will be p...

Page 72 - to save this event in event list.; Example 2: Alarm input – Go to PTZ Preset with Auto-Tracking; button in Event page.

EPN3600 72 pre-and post alarm buffer setting, please refer to “Alarm”. 6. Check “Enable This Event”. 7. Select “Always” for time mask. For detail about Time Mask, please refer to “2.7.4 Time Mask”. 8. Click to save this event in event list. Example 2: Alarm input – Go to PTZ Preset with Auto-Trackin...

Page 74 - Figure 2-59 Event – Event Tab

EPN3600 74 2.7.2 Motion Figure 2-59 Event – Event Tab Motion Detection User can define the motion area to be detected by left clicking the mouse to draw lines. Every click is an end point of the line. When the detection area is formed, double click the mouse to have all the lines connected. To remov...

Page 75 - Moreover, you can set the; Sensitivity; level for motion triggered by; Figure 2-60 Event – Alarm Tab

EPN3600 75 Moreover, you can set the Sensitivity level for motion triggered by selecting from 1 (low), 2, 3, 4, 5, 6, 7, 8, 9 to 10 (high). 2.7.3 Alarm Figure 2-60 Event – Alarm Tab Alarm Output Setting Contact Type: Normal Close, Normal Open Duration Time: Select duration time of alarm output from ...

Page 76 - Mask; Figure 2-61 Event – Time Mask; Always

EPN3600 76 immediately after the trigger. Input the desired length of post-trigger buffer time. It can be set up to 120 seconds. Press Apply to apply the setting changes or Reset to reset without saving the change. Re-trigger Filter Setting Re-trigger Filter: Set a re-trigger filter time, if another...

Page 79 - Select a time zone according to the location where the camera; Saving; Figure 2-63 System – Daylight Saving; Enable Daylight Saving; checkbox to enable daylight saving.

EPN3600 79 synchronization with the NTP server. Time Zone: Select a time zone according to the location where the camera is in use. Press Apply to apply the setting changes or Reset to reset without saving the change. 2.8.2 Daylight Saving Figure 2-63 System – Daylight Saving Set Daylight Saving Che...

Page 80 - Figure 2-64 System – Maintenance; Maintenance Server; Reboot; button if the unit is not behaving as expected.; Restore; button. The only settings saved

EPN3600 80 time and “End” time when daylight saving starts. Set the end time of daylight saving time. Set the end week of daylight saving time: 1 st / 2 nd / 3 rd / 4 th / Last Set the end day of a week of daylight saving time: Sunday / Monday / Tuesday / Wednesday / Thursday / Friday / Saturday Set...

Page 81 - will continue to record after the camera is rebooted.

EPN3600 81 are: • IP setting • DDNS setting Default: The Default button should be used with caution. Pressing this button will return all of the camera's settings, including the IP address, to the factory default values. The camera will then have to be re-installed. Save/Load Configuration Server To...

Page 82 - for key location on panel.

EPN3600 82 2.9 EKB200 Figure 3-65 EKB200 setting EKB-200 is an IP surveillance keyboard controller powered by USB port. User needs to set related control for each EKB-200 key in this window (see Figure 3-65 ). In Action list window, there are 12 EKB-200 button mapping options (From Key No.1 to Key N...

Page 85 - Product Model

EPN3600 85 3. SPECIFICATIONS Product Model EPN2700 (outdoor) EPN2700i (indoor) EPN3100 (outdoor) EPN3100i (indoor) EPN3600 (outdoor) EPN3600i (indoor) CAMERA Pickup Device 1/4" Sony CCD 1/4” Sony Ex-View HAD CCD Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec; PAL: 625...

Page 88 - EverFocus Electronics Corp.; 15 Oser Avenue Unit S; EverFocus

EPN3600 88 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com US...