Page 2 - Safety Precautions; Install the device only in dry and
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 2 of 115 Safety Precautions To avoid any damage, please consider the following safety warnings: • Never place the recorder near heaters, furnaces, other heat sources or in direct sunlight. • Operate the device only in locations maintaining the specif...
Page 4 - CONTENT; LED
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 4 of 115 CONTENT 1 INTRODUCTION ........................................................................................................ 6 2 MAIN FEATURES ..................................................................................................
Page 8 - Supported Camera Models
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 8 of 115 3.2 Supported Camera Models Supported IP Cameras / Video server Status: Version 3.3.6.1 / August 2010 Manufacturer Supported Products EverFocus EAN800A; EAN800AW; EAN850A; EAN900; EDN800; EDN850H; EZN850; EVS100; EVS200A; EVS200AW; EVS400; E...
Page 9 - ENVS Server PC
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 9 of 115 3.3 Dimensions 12-15/16” 15-11/16” 5/8” 3-3/4” 3.4 Delivery scope • ENVS Server PC Panasonic BB-HCM100; BB-HCM110; BB-HCM311; BB-HCM331; BB-HCM371; BB-HCM381; BB-HCM403; BB-HCE481; BB-HCS301; BB-HCM-547; BB-HCM511; BB-HCM515; BB-HCM527; BB-H...
Page 11 - Hardware installation; Front panel controls and connectors
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 11 of 115 4 Hardware installation 4.1. Front panel controls and connectors Power switch Reset button Power LED HDD LED USB Ports [4] Audio [Microphone, speaker] 4.2. Back panel connectors PS/2 Kbd/Mouse Firewire Audio Video 1 Power Input USB Kbd/Mous...
Page 13 - System Setup; First Time System Start; admin; with no password; Main Console screen controls
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 13 of 115 5 System Setup 5.1 First Time System Start With factory default user settings the NVR will boot automatically and start the NVR software application without requiring Windows Login and Application login. The NVR should start immediately aft...
Page 14 - Quick Start Setup; alternate methods see; Appendix 9 Online License Procedures; D. Main Console will be restarted if activated successfully.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 14 of 115 5.3 Quick Start Setup This chapter describes the minimum installation steps to install IP-cameras for standard (continuous) recording. Note: This quick start setup is based on the premise that all IP cameras in the system are installed in t...
Page 16 - Camera setup with SEARCH function
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 16 of 115 The camera setup supports 2 methods to install cameras: +Search: Express setup for camera types, which support UPnP. (EverFocus Nevio IP camera series support UPnP). +Insert: Manual input of camera data for camera types, which have no UPnP ...
Page 18 - Manual IP camera setup
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 18 of 115 Manual IP camera setup An alternative to the search function is to setup cameras, including IP settings, manually. Click the icon “+INSERT” to open the camera setting window: Enter Camera Name, IP parameters and user name / password. Under ...
Page 21 - interval (1h to 1 day), how often NVR checks to delete old records
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 21 of 115 Recycle Range: interval (1h to 1 day), how often NVR checks to delete old records Keep Video: If checked, the NVR will delete video data after a defined time period. If not checked, the NVR will use the full HDD capacity to achieve the maxi...
Page 22 - Counting application:
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 22 of 115 5.4 Detailed Setup Following chapters describe the setup options of the NVR in all details. 5.4.1 Setting - General open with > CONFIG > SETTING This menu defines general parameters, display and start-up behavior of the NVR. Start-up ...
Page 30 - Module Setting; Device name of selected IP device (as defined in CAMERA menu); Device list; Select the device type from the drop-down menu.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 30 of 115 5.4.3 Setting - I/O Device This menu defines parameters for digital inputs and outputs of connected IP devices. The functionality depends on connected IP - devices. Module Setting Device name of selected IP device (as defined in CAMERA menu...
Page 33 - no password; limited user rights user the group USER); Add; Deactivates a selected account without deleting the account.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 33 of 115 5.4.6 Setting - User Account The NVR recorders provide user right management with free assignable user rights for each user. In factory setting 1 user with administrator rights is pre-defined: user name: admin no password For user setup are...
Page 41 - General motion event
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 41 of 115 5.5.1.2 General motion event The GENERAL MOTION event allows motion detection in free definable square detection areas. ADVANCED For defining a detection area draw a window by mouse in the video window. Confirm setting with "REGION1"...
Page 42 - Activated Period
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 42 of 115 Sensitivity Sensitivity of motion detection, moving slider to right increases sensitivity, moving to left decreases sensitivity. Interval Filter function for motion detection. If slider is moved to right, a longer movement period is needed ...
Page 43 - Foreign object event; Define detection zone
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 43 of 115 5.5.1.3 Foreign object event This event type creates an event if an unexpected object appears in a defined zone. Define detection zone Draw the detection zone by mouse in the video window and confirm wit "REGION1". You can also add ...
Page 45 - Missing object event
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 45 of 115 5.5.1.4 Missing object event The event type MISSING OBJECT allows to monitor automatically objects in the camera field of view. Removing of the object will trigger an event. Define detection zone Draw the detection zone by mouse in the vide...
Page 47 - Camera occlusion event; Sensitivity
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 47 of 115 5.5.1.5 Camera occlusion event Sensitivity Sensitivity of detection, moving slider to right increases sensitivity, moving to left decreases sensitivity. Interval Filter function for detection. If slider is moved to right, a longer period of...
Page 48 - BASIC
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 48 of 115 BASIC Options: Life Cycle Definition, how long the message is shown Activated Period Permanent (Always Activated) or scheduled function (daily time period)
Page 49 - Focus lost event
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 49 of 115 5.5.1.6 Focus lost event Sensitivity Sensitivity of detection, moving slider to right increases sensitivity, moving to left decreases sensitivity. Interval Filter function for detection. If slider is moved to right, a longer period of unfoc...
Page 51 - Event action: Play sound
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 51 of 115 Available event actions are: The event actions are described in following chapters. 5.5.2.1 Event action: Play sound After selecting PLAY SOUND as event action and double click opens a window for selecting the sound file. Select a file and ...
Page 52 - Event action: Phone call
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 52 of 115 5.5.2.2 Event action: Send E-mail After selecting SEND E-MAIL as event action and double click opens a window with a list of available contact persons (setup in > CONFIG > SETTING > ADDRESS BOOK required): Select a contact for E-Ma...
Page 53 - Event action: PTZ preset go
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 53 of 115 5.5.2.4 Event action: PTZ preset go This event requires PTZ cameras with preset function in the system. After selecting PTZ PRESET GO as event action and double click opens a window for selecting the PTZ camera, preset position and event re...
Page 58 - Copy To; Default; Week Mode
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 58 of 115 5.6.2 Copy Schedule You may set up the schedule for each channel/camera by repeating the process above, or simply apply the setting of a single camera to all the others. Copy To 5.6.3 3.5 Week Mode Schedule the cameras for each day of the w...
Page 59 - Adjust the Scheduled Setting:; You can manually change the setting at any time after
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 59 of 115 Adjust the Scheduled Setting: You can manually change the setting at any time after you insert or load a period of schedule. Option 1: Move the cursor to the Time Bar and change the length or move the bar sideway to change the start and end...
Page 60 - Select this option to record the video at all time.; Record on Event; This option needs start Smart Guard to trigger the recording; Record on Motion; Always Record
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 60 of 115 5.6.4 Conigure - Encoding Option Panel Always Record Select this option to record the video at all time. Record on Event Select this option to obtain the Select Event panel. From the Smart Guard list, check the box of the camera(s) that you...
Page 63 - COUNTING APPLICATION; Define Detection Zones
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 63 of 115 5.8 COUNTING APPLICATION The integrated Counting Application allows to count the number of persons, cars or other objects in one or both directions. The counting results can be shown in the camera live view. For evaluation of counting resul...
Page 66 - Network Services; MAIN
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 66 of 115 5.9 Network Services For remote access to the NVR system are Server - functionalities required. The functions are managed and defined under NETWORK SERVICE. For setup go to > CONFIG > NETWORK SERVICE. 5.9.1 Network service: Live Strea...
Page 67 - Changing Server options is only possible, if the
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 67 of 115 Kill Client Stops remote connection to selected connection from the list Kill All Clients Disables all current connections OPTIONS NOTE: Changing Server options is only possible, if the service is stopped Port Network port for remote live v...
Page 69 - Performance
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 69 of 115 Performance This tab shows current network streaming performance for total system and for selected live connection. 5.9.2 Network Service: Remote Playback Total bit rate Individual Camera bit rate Live Streaming Server log information
Page 70 - Changing Server options is only possible, if the service; Port
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 70 of 115 5.9.2 Network Service: Remote Playback When starting the remote playback function of your computer, you allow remote users to log on to the specific computer and withdraw data files that are stored on it. As system administrator, you are ab...
Page 71 - Save log; Save log file to specific folder; White List
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 71 of 115 is 64, one account counts as one connection. User Default Web Server If checkbox is activated, clients will be able to watch playback video via Internet Explorer. The port for live streaming server is set to 80 by default. Save log Save log...
Page 76 - Appendix A: DB TOOL; Step 2
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 76 of 115 6 Appendix A: DB TOOL The DB Tool Repair database files and Export configurations. NOTE : improper use of this DB Tool may cause lose of the recorded video data. Step 1: Execute DB Tool from program files. Step 2: Enter the password of admi...
Page 77 - Repair Database
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 77 of 115 6.1 Repair Database This page has three repair method, Modify Location, Verify Only, and Repair. For modify location propose: Playback system can recognize all recording video in the folders which list on Main Console > Config > Setti...
Page 78 - Example of database modification:
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 78 of 115 Example of database modification: In certain case that when video data needs to be transfer from old PC to another new PC, user will need to perform the following procedure. 1. Manually copy all recorded video data from the default installa...
Page 80 - Export Configurations
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 80 of 115 6.2 Export Configurations This tool allows to export the complete configuration to a file. Step 1: Press “Export”. Step 2: Select the location you want to Export and type the name of the configurations. Step 3: Press “Save” to start to impo...
Page 81 - Appendix B: 3 GPP setup examples; Configuration in NVR; Config
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 81 of 115 7 Appendix B: 3 GPP setup examples How to setup 3GPP streaming connection (using BenQ-Siemens mobile phones) 7.1 Configuration in NVR Step 1 : Go to Config and select Network Service
Page 82 - Configuration Mobile Phone; then
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 82 of 115 Step 2 : Select 3GPP Service , and then click Start Note: In the Option item, the port selected here is the same port from mobile handset 7.2 Configuration Mobile Phone 7.2.1 BenQ-Siemens E81 Step 1 : Goto Menu, then Internet
Page 87 - Appendix C: Installation of Remote Desktop Tool; Installation
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 87 of 115 8 Appendix C: Installation of Remote Desktop Tool Installation Step 1: Insert the Installation CD. Step 2: Please go to RemoteDesktopViewer directly and Run Setup.exe file. Start Remote Desktop Tool Step 1: Please point to Start > All Pr...
Page 88 - Appendix D – Online License Procedures; Contents; dongle
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 88 of 115 9. Appendix D – Online License Procedures Contents • 9.1 Overview • 9.2 Rationale • 9.3 Activation o 9.3.1 Activate by inputting serial number (SN) 9.3.1.1 Online 9.3.1.2 Offline o 9.3.2 Activate by importing serial number (SN) files (txt f...
Page 89 - No more DOA/RMA issues because of hardware failure; : If something is wrong with; No more hardware compatibility issues; : Online license is just a set of hexadecimal; Faster shipping process and less shipping cost; : Online licenses can be issued via; Online; ) Click on CONFIG and choose “License Manager” Tool on the NVR.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 89 of 115 9.2 Rationale Using online license can resolve several issues such as... No more DOA/RMA issues because of hardware failure : If something is wrong with your license, EverFocus can check the license status for you and have it fixed online. ...
Page 90 - ) MainConsole will be restarted if activated successfully.; Offline
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 90 of 115 4.) MainConsole will be restarted if activated successfully. 9.3.1.2 Offline In many cases, machines are installed in an environment without internet access. You may choose offline activation for these cases. In these cases, you need anothe...
Page 102 - ) Main Console will be restarted if activated successfully.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 102 of 115 4.) Main Console will be restarted if activated successfully. • Note: After the conversion, that dongle will be invalid.
Page 108 - Note: Please write down the serial number before transferring
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 108 of 115 8.)Main Console will restart if the license file is imported successfully. • Note: After the conversion, the dongle will be invalid. 9.4 Transfer (De-activation) When you are migrating a system to a different PC, or re-installing a system,...
Page 109 - Note: Please write down the serial number before transfer.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 109 of 115 3.) After transfer, serial numbers will become de-activated. 9.4.2 Offline transfer Before transferring serial numbers, we strongly recommend you transcribe the serial number so that you will not forget it when you need to re-activate. In ...
Page 112 - Check if transfer process is completed.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 112 of 115 6. Check if transfer process is completed.
Page 113 - The states of a serial number; State; Ready
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 113 of 115 9.5 The states of a serial number A serial number can be at various states. The table lists the states below. State Description Ready The serial number is available for registration. Activated The serial number has already been registered....
Page 114 - How do I activate in a closed system without internet; Please see Offline activation sections above.
ENVS800 / ENVS1600 / ENVS3200 Installation Manual 114 of 115 9.6.2 What if I lose my serial numbers? You should be able to keep records of your purchased serial numbers. If you do lose them, please contact your reseller or sales contact. 9.6.3 What if someone uses my serial numbers? If your serial n...