EverFocus ED300E - Manual
EverFocus ED300E – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CCD; STANDARD ACCESSORIES; Camera Unit
- Page 3 – MAJOR PARTS NAMES AND FUNCTIONS
- Page 5 – Please connect to the BNC connector of Monitor video in.; INSTALLATION; Remove the plastic dome cover.
- Page 7 – ADJUSTMENT; Mirror
- Page 8 – SPECIFICATIONS
- Page 9 – EverFocus Electronics Corp.; 15 Oser Avenue Unit S
EVERFOCUS
Color Dome Camera
Operation Instructions
Model No.
ED300E/200E
Please read this manual first for correct installation and operation. This manual should be retained
for future reference. The information in this manual was current when published. The
manufacturer reserves the right to revise and improve its products. All specifications are therefore
subject to change without notice.
PRECAUTIONS
1.
Do not have camera immersed in water.
2.
Do not disassemble it or place it on an unstable base.
3.
Do not touch the surface of CCD sensor by hand directly.
4.
Never face the camera toward the sun.
5.
Use proper power source otherwise the camera will not function correctly.
6.
Use the camera at temperatures within 0
℃
~ 50
℃
/32
℉
~122
℉
and humidity between 20%~
80%. The input power sources are 12VDC only and 12VDC/24VAC.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1 PREFACE The ED200/300 color dome camera with vari-focal/fixed Lens Series are compact, CCD Color Cameras. Their stylish appearance can be applied as per installer's ideal locations on the ceiling. The dome camera design with advance digital processing circuitry for middle/high-resolution 1/3" ...
2 MAJOR PARTS NAMES AND FUNCTIONS ○ 11 ○ 10 j h i k d c g f e ○ 12 ○ 13
4 ○ 12 Power input Please connect the connector of camera to 12VDC or 24VAC power source. ○ 13 Video Output BNC Connector Please connect to the BNC connector of Monitor video in. INSTALLATION 1. Remove the plastic dome cover. 2. Lossen the two screws of the supporting bracket to remove the camera bo...
