EverFocus EQ550 - Manual
EverFocus EQ550 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; WHITE
- Page 5 – NAMES AND FUNCTIONS OF PARTS; Internal Sensor
- Page 6 – Back panel connections; Connect to RS485 to get control by keyboard.; Polestar with RS485 Mini; for detail about RS485 communication.
- Page 8 – Mount the lens
- Page 10 – CAMERA SETUP OPERATIONS
- Page 11 – Display/Close the user setup menu screen; The Cursor Buttons & the SET Button; Set button
- Page 12 – Select the shutter mode by pressing the LEFT or RIGHT button.; can be adjusted from 1 to 70.
- Page 14 – WHITE BALANCE control; Please select one of the 3 modes below:
- Page 16 – Images are brighter and sharper.; When AGC is turned off, DNR will be disabled.
- Page 20 – Please select ON mode for the chosen area.
- Page 21 – allows you to return to the previous menu.
- Page 26 – POLESTAR WITH RS485 MINI DIN
- Page 28 – Day mode
- Page 30 – Alarm output for motion detected
- Page 33 – EverFocus Electronics Corp.; 15 Oser Avenue Unit S
EVERFOCUS
1/3” Super High Resolution
560 TVL Day/Night
Dynamic Noise Reduction Camera
Operation Instructions
Model No.
EQ550
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers
since the magnetic fields generate from above devices will distort the video image.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from wet and never touch the power cord with wet hands.
Touch the wet power cord with hands or touch the power cord with wet hands may result in electric shock.
5.
Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or file.
6. Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera
body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens.
7.
Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0
℃
~ 50
℃
(32
℉
~122
℉
)
and humidity between 20~80%. The
input power source is 12V
DC
/24V
AC
or 100~ 240V
AC
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 1 - TABLE OF CONTENTS 1. PRODUCT OVERVIEW ................................................................................................................................... 3 1.1 M AIN F EATURES .........................................................................................................
- 4 - 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front panel 2.2 Top/Bottom The bracket on the top side can be used for suspending the camera. On the other hand, the brackets on the bottom side can be used as a support of the camera. Internal Sensor Microphone (Reserved only for Audio model) Bottom Bracket...
- 5 - 2.3 Back panel connections (1) RS-485 port Connect to RS485 to get control by keyboard. Please refer to “ 6. Polestar with RS485 Mini Din” for detail about RS485 communication. (2) Power Input Terminal Connects to the appropriate power to each model. (3) Video Output Connector Connect the vide...
