EverFocus EQ350 - Manual

EverFocus EQ350

EverFocus EQ350 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
Page: / 11

Table of Contents:

  • Page 2 – power source ratings.; PREFACE
  • Page 3 – SPECIFICATIONS
  • Page 4 – DIMENSIONS
  • Page 5 – Dual Power Model with Audio; Dual Power Model without Audio
  • Page 6 – C/CS mount Focus Switch Ring; preventing losing focus
  • Page 7 – Power cable varies in different model
  • Page 8 – INSTALLATION; at C position
  • Page 9 – Camera Setting DIP Switch; the default setting is Off.
  • Page 11 – EverFocus Electronics Corp.; 15 Oser Avenue Unit S
Loading the manual

EVERFOCUS

1/3” Sony CCD Aluminum Box Housing

Color Camera

Operation Instructions

Model No.

EQ350/EQ250

Please read this manual first for correct installation and operation. This manual should be retained

for future reference. The information in this manual was current when published. The

manufacturer reserves the right to revise and improve its products. All specifications are therefore

subject to change without notice.

PRECAUTIONS

1.

Do not install the camera near electric or magnetic fields.

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer,

audio speakers since the magnetic fields generate from above devices will distort the video

images.

2.

Never disassemble the camera nor put impurities in it.

Disassembly or impurities may result in trouble or fire.

3.

Never face the camera toward the sun.

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

4.

Keep the power cord away from water and liquid.

Touching the wet power cord may result in electric shock.

5.

Never install the camera in areas exposed to water, oil or gas.

Water, oil or gas may result in failure, electric shock or fire.

6. Cleaning

Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from

the camera body. Use lens tissue or a cotton swab and ethanol to clean the sensor and the

camera lens.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - power source ratings.; PREFACE

1 7. Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within -10°C~50°C (14°F~122°F) and humidity between 20%~ 80%. The input power source are 12VDC/24VAC; 100~240VAC. PREFACE The EQ series is a solid-state color video camer...

Page 3 - SPECIFICATIONS

2 SPECIFICATIONS Type EQ350 EQ250 Pickup Device 1/3'' SONY Super HAD CCD Picture Elements NTSC: 768(H) x 494(V) PAL: 752(H) x 582(V) NTSC: 510(H) x 492(V) PAL: 500(H) x 582(V) Video Format NTSC or PAL Scanning System NTSC: 525 TV lines, 60 fields/sec PAL: 625 TV lines, 50 fields/sec Horizontal Resol...

Page 4 - DIMENSIONS

Other EverFocus Models

All EverFocus Other