Page 3 - About this document
IP99 series 2 About this document All the safety and operating instructions should be read and followed before the unit is operated. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and impro...
Page 4 - Minimum Computer Requirements:
IP99 series 3 power source ratings. Do not use the appliance in an extreme environment where high temperature or high humidity exists. Use the appliance at temperature within -10 ℃ ~ 50 ℃ / 14 ~ 1 ℉ 22 and a humidity below 90%. The input power source ℉ for this appliance is 12VDC. Use only the recom...
Page 6 - TABLE OF CONTENTS; IP
IP99 series 5 TABLE OF CONTENTS 1. STARTING THE CAMERA OR VIDEO SERVER ............................................. 7 1.1 I NSTALL IP99 SEARCHER IN PC ............................................................................. 7 1.2 A SSIGN N EW IP ADDRESS ( OPTIONAL ) ..............................
Page 7 - PTZ
IP99 series 6 3.12 PTZ SETTING ..................................................................................................... 26 3.13 A DMINISTRATOR ............................................................................................... 27 3.14 C HANGE PASSWORD ..........................
Page 8 - Starting the camera or video server; Install IP99 searcher in PC; Though you can simply; when you connect to only one IP99 device.(; default user
IP99 series 7 1. Starting the camera or video server 1.1 Install IP99 searcher in PC Though you can simply enter 192.168.1.99 in IP address bar to access camera when you connect to only one IP99 device.( Default IP address is: 192.168.1.99 Port is: 80) . However, it is recommended that you use IP se...
Page 9 - Diagram 1.2 Assign new IP address; Accessing the camera; Diagram 1.3 enter IP address
IP99 series 8 Note: Please consult your network administrator for avoiding IP address conflict Diagram 1.2 Assign new IP address 1.3 Accessing the camera Double click selected camera in IP99 searcher or Enter IP address in IP address bar, as shown in diagram 1.3: Diagram 1.3 enter IP address Enter I...
Page 10 - default user name is admin,; Reset and Factory Default; IP99 system operation
IP99 series 9 In login window, enter user name and password, ( default user name is admin, password is 11111111 ) . Click “ Confirm " button to enter web window, as shown in diagram 1.5: Diagram 1.5 Camera Web page 1.4 Reset and Factory Default You can physically push” RST” button on IP99 camera or ...
Page 11 - Diagram 2.2 Add video display; Change video resource; display center point; and go to “; Change Resource; Diagram 2.3 Change video resource
IP99 series 10 2.1 Add more videos If you wish to add one video display in the same web page, click “Add New” button, as shown in diagram 2.2: Diagram 2.2 Add video display 2.2 Change video resource You can change video resource and simultaneously view multiplies cameras and encoders at same time. R...
Page 12 - Note
IP99 series 11 2.3. Edit and Change Display Layout 2.3.1 Edit layout If you wish to add more video displays, please click , then interface changes to , you can freely set the layout of video display in this window. Enter the number of channels you want for each row. Use comma to separate them. And c...
Page 13 - Operating buttons
IP99 series 12 Diagram 2.5 Layout selection 2.4 Zoom in/zoom out 2.4.1 Integer zoom in/zoom out Click buttons at top right side of the page to zoom in or zoom out the entire screen. 2.3.2 Single display zoom in/zoom out To zoom in/zoom out single channel screen, direct the mouse to at top of that ch...
Page 18 - Status information
IP99 series 17 4 ) Sound ON : used to enable/disable sound transmission. 5 ) PTZ(for Video Server only) : Click “ PTZ " option which allows you to check keyboard keys of PC used to control speed dome, as shown in diagram 2.13: Diagram 2.13 PTZ contraol keys and functions 6 ) File .av to AVI : Click ...
Page 22 - Diagram 3.4 Alarm event
IP99 series 21 selected area, click “Remove region”. Please refer to diagram 3.4: Diagram 3.4 Alarm event 1 ) Motion detection event: No event, send JPEG file by e-mail or upload to FTP. Note: When sending JPEG by e-mail or upload to FTP, file will be sent to the assigned e-mail adress. 2 ) Alarm I/...
Page 23 - Diagaram 3.6 Networking
IP99 series 22 3.5 Networking Set camera’s IP address, DNS setting, HTTP port information, as shown in diagram 3.6: Diagaram 3.6 Networking DHCP will automatically get the IP address. If you are not using DHCP, you can manually assign IP address and port. Primary DNS server has to be the same as HTT...
Page 28 - Diagram 3.13 PTZ settings
IP99 series 27 Diagram 3.13 PTZ settings Since IP address is the only fixed one, therefore PTZ address is set as “1”. Protocols are Pelco-D and Pelco-P which are in common use. Note: When using Everfocus speed dome, user only needs to set the protocol as AUTO in order to control the speed dome. 3.13...
Page 29 - Diagram 3.14 Management; Change password; Diagram 3.15 change password; Special setting
IP99 series 28 Diagram 3.14 Management 3.14 Change password Change user’s login password, as shown in diagram 3.15: Diagram 3.15 change password 3.15 Special setting Set compression, set camera type and transform to AVI format, as shown in diagram 3.16:
Page 31 - Frequently Asked Questions; I have problem recording and playback on Windows Vista.; You will be prompted to reboot your computer. Do so when ready.
IP99 series 30 4. Frequently Asked Questions 4.1 I have problem recording and playback on Windows Vista. Answer: You need to turn off User Account Control (UAC) 1. Open Control Panel. 2. Under User Account and Family settings click on the "Add or remove user account". 3. Click on one of the ...
Page 32 - EverFocus Electronics Corp.; EverFocus
IP99 series 31 EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL: 886-2-26982334 FAX: 886-2-26982380 www.everfocus.com.tw USA Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com ...