Dish Network 32.0 - Manuals

C-4 Quick Setup Select TV Code and then follow the on-screen instructions to enter your TV’s device code. Set Up the Remote to Control Your TV 1 2 3 4 To set up the remote control to operate a TV, you can select a Device Code (see instructions on page 3). Your ViP922 DVR has a large database of Devi...

Quick Setup/Operation C-5 Placing Your Remote in Limited Mode Use the arrow button to highlight Enabled and then select it. 2 3 Highlight and select Save. 1 Select the Limited Mode option. To take the remote out of Limited Mode, highlight Disabled instead of Enabled in step 3 . Limited Mode locks ou...

Receiver Power & TV Power Top button turns the receiver on/off, Bottom button turns the TV on/off Programming required (see C-4 ) Input Press once for Input Operation Remote Operation SAT Mode SAT Control TV volume Programming required (see C-4 ) Volume & Mute Buttons To use the features des...

Table of Contents Quick Setup Verifying the Key ................................................................... C-2Inserting the Batteries ........................................................... C-2Linking Your Remote Control ................................................ C-3 Operation Set...

1 R EMOTE C ONTROL O VERVIEW Use this full-function remote control to operate the DISH Network ViP® 922 SlingLoaded™ DVR receiver. Also, you can program this remote control to operate most popular brands of audio/video equipment like a TV, a DVD/BD player (or VCR), or an audio receiver/amplifier. Se...

2 If you program the remote control to operate other equipment, refer to page C-6 and the following for remote-control operation instructions: • POWER , INPUT, MUTE , and VOLUME remote buttons are used to control your TV when it is programmed in TV mode. • The same buttons your DVR uses when in SAT ...

3 (or TV/VCR), follow the instructions to program the remote to operate the TV using its code, and then repeat those instructions for the DVD/BD player or VCR in AUX mode using its code. Press the TV mode button to use the combination device’s TV functions, or the AUX mode button to use DVD/BD (or V...

4 5 Scroll the Sort By: (or Aux Device: ) list to position the option you wish to select within the blue highlight bar. Then highlight your device’s name in the Brand: list and select Next . If the brand is not listed, see Entering Equipment Codes on page 5. If there is no equipment code for your de...

5 E NTERING E QUIPMENT C ODES 10 If the code worked for other buttons, select Yes and continue with step 11. If the code did not work, select No and repeat steps 6 through 9 for the next code for your brand. Choose the code that provides the remote with support for the most device functions. If you ...

8 S WITCHING B ETWEEN TV AND A MPLIFIER V OLUME C ONTROL If a remote control used with the ViP922 DVR has been set up to operate a TV, then MUTE and VOLUME +/- buttons adjust the TV’s volume. To use the remote to adjust the volume of your remote-controllable audio equipment instead of adjusting your...

9 V IEWING E QUIPMENT C ODES These instructions explain how to read out and verify the device code(s) for the equipment you have programmed the remote to control. You may write these code(s) in the spaces provided in the table on the last page, just in case you need to enter a device code manually. ...

10 1 Make sure the UHF-2G remote antenna is connected to the correct input on the receiver’s back panel and is not touching anything else. It should be tightened only by hand. Note : Remote antennas used with other DISH Network satellite receivers and remotes cannot be used with your ViP922 receiver...

11 C OLORED B UTTONS The following table lists some of these shortcuts for the colored set of buttons on your ViP922 DVR remote control. Note that scheduled updates to your receiver software may add to or modify these shortcuts. L OCATING A L OST R EMOTE The next time you misplace a remote control o...

12 To access the System Wizard from your ViP922 DVR front panel: 1 With your receiver turned on, touch the front panel to activate it, and then select MENU . 2 Use the arrow controls to highlight the Settings tile and then SELECT it. 3 Use the arrow controls to scroll down the list of Settings items...

13 T ROUBLESHOOTING What’s Happening What’s Wrong What You Can Do The remote control or one or more buttons on it seems to have stopped working. The remote control has gone to “sleep” to reduce battery drain. Wake the remote control by pressing one or more button(s) on the remote, such as the SELECT...

15 L IMITED W ARRANTY This warranty extends only to the original user (“you,” “your”) of the DISH Network remote control and is limited to the purchase price of the remote control. EchoStar Technologies L.L.C., formerly known as EchoStar Technologies Corporation, and its affiliated companies (“we,” ...

16 Advance Exchange Program The Advanced Exchange Program allows you to have a replacement remote shipped immediately to you. Depending upon where you live, the remote should arrive within 3 to 5 business days. You will not have to return your defective remote to DISH Network using this program.A sh...

18 R EGULATORY F ACTORS This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Change...

To read out your remote codes, see page 9 for instructions. If your remote is in Limited Mode (see page C-6), then only Volume and Mute buttons work in TV mode. Remote Key Auxiliary Equipment Code 1