Page 3 - Safety Precautions; limitations before installing and/or operating this unit.; Warning
i Safety Precautions Warning Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this installation manual. DISH Network is notresponsible for • issues arising from installations not performed according to the procedures...
Page 4 - Do not drop the unit or subject it to strong shocks.; Caution; Do not open the unit.
ii Warning Take the following precautions to prevent fire and avoid personal injury: • To avoid short circuits, never put or leave any metallic objects (coins, tools, etc.) inside theunit. • If the unit emits smoke or strange smells, turn the power off immediately. • Do not drop the unit or subject ...
Page 5 - Take the following precaution while setting up your SR200:; Subscribe; If the unit doesn’t seem to be working properly:
iii Caution Take the following precaution while setting up your SR200: Don’t push any buttons or perform any operations until updating has been completed. Once allupdated SIRIUS channels are received, the display will change to Call 1-888-539-SIRIUS to Subscribe and will place you in SIRIUS Satellit...
Page 6 - iv; Table of Contents
iv Table of Contents Box Contents .................................................................................................................................. 1Quick Start Guide .......................................................................................................................
Page 7 - Box Contents; Note
1 CONGRATULATIONS! Your new SR200 portable Plug-n-Play from DISH Network lets you enjoy SIRIUS® Satellite Radio’s digitalentertainment channels. Use this manual to familiarize yourself with all of SR200’s features and capabilities. Box Contents Unpack your SR200 carefully and make sure that everythi...
Page 9 - Quick Start Guide
3 Quick Start Guide After you have successfully installed the SR200 and activated your SIRIUS subscription, the Normal Operation screen will appear. The SR200 has four ways to find music: • Select Music with the NAVIGATION WHEEL. Turn the NAVIGATION WHEEL to find channels you like. When you stop tur...
Page 10 - Installation Instructions; until the installation is completed.
4 Installation Instructions 1. Determine where you want to mount SR200.• Do not install SR200 where it may obstruct your view through the windshield or your view of your vehicle’s indicator displays. • Do not install SR200 where it will hinder your access to the vehicle’s controls. • Do not install ...
Page 11 - Installation in a Vehicle: Mounting the Antenna; ANT; Antenna Aiming
5 Installation in a Vehicle: Mounting the Antenna 1. Temporarily plug the antenna into the ANT connector on the back of the cradle until it is firmly seated. 2. Find an antenna location on a metal surface of your vehicle atleast 12" x 12", and at least 6" from a window.• Best reception i...
Page 12 - Installation in a Vehicle: Running the Antenna Cable; lighter unplug the antenna from the cradle.; Plug the cigarette lighter adapter into the cigarette lighter.
6 Installation in a Vehicle: Running the Antenna Cable 1. Turn SR200’s power off and remove it from the cradle; unplug the cigarette lighter adapter from the cigarette lighter; unplug the antenna from the cradle. 2. Route the cable from the antenna to the vehicle’s interior by tucking it underneath ...
Page 13 - SR200 Controls and Features; POWER Button; Channel; NAVIGATION WHEEL; NAVIGATION; CATEGORY Up/ Down Button; Category List; Menu Button
7 SR200 Controls and Features POWER Button Turns SR200 On and Off; exits the Channel , Category , Song and Artist List modes. NAVIGATION WHEEL Navigates through display screens and makes selections ofitems highlighted on the display. Clockwise increases ormoves up in the menus. Counterclockwise decr...
Page 14 - Preset Tune Mode; Remote Control Receiver; Receives signals from the included wireless remote control.
8 Preset Number Buttons (0-9) Sets and selects preset channels. Memory (MEMO) Button (S-Seek Function) Saves and recalls artist names and song titles. You can store up to 20 artist/song title combinations. Band Button (P.Tune) Pressing and releasing switches between preset banks A , B , and C , whic...
Page 15 - Remote Control Functions; Turns SR200 on and off.; Mute Button; Navigates back to previous channel.; DIRECT Button; Accesses channels directly by number.; MENU Button; Enters and exits the; Setup Mode
9 Remote Control Functions POWER Button Turns SR200 on and off. CH+/ CH-/ CAT+/ CAT- Buttons Navigate through channels, categories, and display screens. Mute Button Mutes audio. PREVIOUS (PREV) Button Navigates back to previous channel. DIRECT Button Accesses channels directly by number. SELECT (SEL...
Page 16 - DISPLAY Button; Installation; UPDATING CHANNELS
10 MEMORY (MEMO) Button Saves and recalls Song and Artist information; sets Parental Lock code number. DISPLAY Button Changes text size of artist names and song titles. BAND Button Switches between preset bands A , B , and C . Number Buttons (0-9) Selects channels directly and by preset. Installing ...
Page 17 - Removing SR200 from the Dock
11 Note : Don’t push any buttons or perform any operations until updating has been completed. Once all updated SIRIUS channel channels are received, the display will change to Call 1-888-539-SIRIUS to Subscribe and will place you in SIRIUS Satellite Radio’s Preview Channel. Channel 184 is the SIRIUS...
Page 18 - Selecting Music
12 1. Use the CATEGORY button to scroll through music and entertainment categories. 2. When the category (for example, Rock) you want is highlighted, use the NAVIGATION WHEEL to highlight the channel you want to hear. 3. When the channel you want is highlighted, press the NAVIGATION WHEEL to listen ...
Page 19 - Direct Tuning
13 Selecting Music by Artist (Artist List Mode) 1. While the Channel Lis t screen is active, press the DISPLAY (DISP) button once. The Artist List screen will appear, showing all currently-playing artists regardless of category.• If composer information is available for a channel, it will be display...
Page 20 - Setting Channel Presets; Normal Operation; Basic Operation and Selecting Music; Tuning Channel Presets; BAND
14 Setting Channel Presets You can store up to 30 of your favorite channels as presets, for quick access. Presets are stored in 3 banks, A , B , and C , each containing 10 channel presets. 1. Press the BAND button to activate the preset bank you want. The selected bank is shown in the lower right co...
Page 21 - Preset Number; DISP; Song Title List; Display Button; DISP
15 Preset Tune Mode When in the P.Tune Mode , press and hold the DISP button for 2 seconds; this exits normal preset tuning and enters a 6-line menu mode which displaysthe Preset Number ( A-1 , for example), a single space and the 20-character channel name. While in the Preset List menu, pressing th...
Page 23 - Title
17 2. By holding down the MEMO button for 3 seconds, the stored memory information (one at a time) is displayed on the screen in page format. Use the NAVIGATION WHEEL to scroll through the 20 entries. This function allows you to recall information regarding the Artist/Song Title for your own persona...
Page 25 - Menu Display Options; MENU; Menu Options
19 Menu Display Options To enter the Menu Options page, press and hold the MENU Button. The Menu Options list will appear on the LCD display. Using the NAVIGATION WHEEL , highlight the option you wish to adjust and press the NAVIGATION WHEEL to make the selection. The following options are available...
Page 26 - Minus
20 SIRIUS ID Displays your 12 digit SIRIUS ID number. No adjustments are allowed in thismode. To exit this option, press the NAVIGATION WHEEL or MENU Button. Display Settings The following adjustments are possible: Dimming ControlContrast Control To enter either of these modes, use the NAVIGATION WH...
Page 27 - FM Transmitter Options; FM On; Skip
21 FM Transmitter Options The following adjustments are possible: FM On/Off Upon entering this mode, rotating the NAVIGATION WHEEL toggles between the FM On or FM Off function/display selection. To select and exit this function, press the NAVIGATION WHEEL . No button activity for 10 seconds will als...
Page 28 - Lock Options
22 Lock Options Upon entering this mode for the first time, the user is prompted to enter the default four digit numerical code. All future entries into this mode display a channel list with the current channel in play highlighted. The NAVIGATION WHEEL is used to navigate the list and highlight the ...
Page 29 - Edit Code; Audio Level; sign to the left and a
23 Edit Code Upon entering this mode, the user is prompted to enter the current four digit numerical lock code. Once thecorrect code has been entered, the user is prompted to enter a new 4-digit code twice. The second entry isrequested for confirmation. Edit Lock Code Screen Lock Options Screen Audi...
Page 31 - Clock
25 Clock When entering this menu option, you can set up the clock shown on the Normal Operation screen, based on the format desired, and the time zone in which you reside. The clock data is provided via the SIRIUS Satellitechannel, and will update based on the received signal. Format The Clock Forma...
Page 32 - Alarm Clock; Alarm; Alarm On; Program Alert; Set Channel Alert
26 Alarm Clock When this menu option is highlighted and selected, you will be able to set the unit to turn on at a specific time.The last selected channel prior to shutdown will be present when the Alarm feature is activated. Alarm appears on the first line of the display followed by the alarm optio...
Page 33 - Day; Auto Shutdown
27 Time/Day Rotating the NAVIGATION WHEEL toggles between Time and Day . If Time is selected, use the NAVIGATIONWHEEL increase (clockwise) or decrease (counterclockwise) the set time in a circular motion on one line in the middle of the display from the default value (12:00pm).When the desired time ...
Page 34 - Cancel Auto Shutdown; Enabled; Sleep Mode
28 Cancel Auto Shutdown Press the NAVIGATION WHEEL to terminate the function temporarily. The following options are available in this mode: • Enabled • Disabled (Default) Rotate the NAVIGATION WHEEL to toggle between Enabled and Disabled . When the desired shut down status is highlighted, press the ...
Page 35 - Factory Default; Yes
29 Factory Default The Factory Default screen displays the text Restore Settings with the options: Yes/No . Upon entering this mode, rotating the NAVIGATION WHEEL toggles between the Yes or No function display selection. If Yes is chosen, the unit reverts to the original factory settings for the fol...
Page 36 - Fault; No Sound; Antenna Not Detected; display message; Possible Cause; Troubleshooting
30 Fault No Sound No signal on SR200 display Audio static or loss of clarity Antenna Not Detected display message SR200 does not turn on The audio cables are not connected.The car radio is set on the wrongfrequency. Check for obstacles over or aroundantenna. FM Frequency contains static.Vehicle ante...
Page 38 - Labor; control. It does not include other parts purchased separately.
32 Limited Warranty This Limited Warranty is a legal document. Keep it in a safe place. Remember to retain yourBill of Sale for warranty service! Any items returned without a copy of the Proof of Purchasewill be considered out of warranty. What the Warranty Covers This warranty extends only to the o...
Page 39 - What the Warranty Does Not Cover
33 What the Warranty Does Not Cover This warranty does not cover installation of the system. If applicable, such installation will be warranted under aseparate installation agreement.This warranty does not cover consumer instruction, physical setup or adjustment of any consumer electronicdevices, re...
Page 40 - the SID or ESN number from the back of the receiver ready.
34 Legal Limitations REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY.ECHOSTAR SHALL NOT BE HELD LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIALDAMAGES FOR BREACH OF ANY EXPRESSED OR IMPLIED WARRANTY ON THIS SYSTEM, NORFOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE...
Page 41 - FCC Warning; Reorient or relocate the receiving antenna.
35 5. Returned equipment must be packaged properly, using either the original shipping materials or the packaging in which the replacement equipment is shipped. Include a copy of the Bill of Sale. Any items returned without a copy of the Proof of Purchase will be considered out of warranty. Follow t...
Page 42 - Notes
