Dish Network 167821 - Manuals

S-3 Quick Setup/Operation SELECT Press and hold RECOVER until all mode buttons light up. If you see the System Info screen, proceed to step 4. Otherwise, continue to step 3. Press RECOVER again & wait until the mode lights stop flashing. If you see the System Info screen, go to step 4. If not, r...

S-4 Operation Remote Operation SAT Mode SAT To use the features described in this section, make sure you are in SAT mode by pressing the SAT Mode button. Note: Some features may not be available depending on your receiver model. Receiver Power & TV Power Receiver Menu Program Guide Arrows/Select...

1 R EMOTE C ONTROL O VERVIEW Use this full-function remote to control your DISH Network receiver. Also, you can program the remote to control most of the popular brands of audio/video equipment like a TV, VCR, DVD player, or a second DISH Network satellite receiver. See Programming for Other Equipme...

3 L IMITED M ODE You can program your remote control in Limited Mode to keep from accidentally changing the channel on your TV or VCR. When Limited Mode is enabled, you cannot select TV mode. If you press the TV button while TV mode is programmed in Limited Mode, the TV button flashes and the SAT bu...

4 P ROGRAMMING U SING E QUIPMENT C ODE T ABLES You can set up the remote to control other equipment using the equipment codes listed on page 12 and the modes as shown on page 1. Instructions Additional Information 1 Turn the equipment on. Use the equipment’s front panel buttons or its remote control...

5 S CANNING FOR E QUIPMENT C ODES 9 Turn the equipment back on and try some other buttons to make sure they work. If the code works for other buttons, stop here. Note : If you have programmed your remote in Limited Mode, only the MUTE and VOLUME buttons work. For example, sometimes POWER works when ...

6 4 Press POWER . This puts your remote in the scan mode. 5 Press the UP or DOWN ARROW repeatedly until the equipment turns off. As you press the UP or DOWN ARROW , the remote tries each code in the memory to see if it can turn off your equipment. When the equipment turns off, you have found a code ...

7 S WITCHING B ETWEEN TV AND A MPLIFIER V OLUME C ONTROL When you set up the remote to control a TV, the MUTE and VOLUME buttons control the TV volume, even if your remote control is in SAT mode. However, if you want to use the AUX mode to control a tuner or amplifier that has a volume setting, you ...

8 P ROGRAMMING THE R EMOTE TO C ONTROL A S ECOND R ECEIVER IN AUX M ODE If you have another DISH Network satellite receiver installed, you can use this remote in AUX mode to control it along with your new receiver. When you program the remote to control the other receiver, the remote sends out IR si...

9 R EADING O UT THE R EMOTE C ONTROL C ODES These instructions explain how to check the codes you put in the remote control when you set it up. Be sure to write them in the spaces provided on the inside of the back cover. Instructions Additional Information 1 Press and hold the mode button for the e...

10 D ISCRETE C ODES FOR L EARNING R EMOTES Remote control discrete On and Off IR commands are used by installers when programming macro commands into universal remotes. Using an On-only or Off-only command is more effective than a toggle On/Off command when trying to ensure the satellite receiver is...

11 5 Press RECORD . Make sure the Remote Address you see on the System Info screen is the same as the one you entered in step 3. If it isn’t, the remote cannot control the receiver. Press RECORD a second time. 6 Press SELECT to close the System Info screen.

12 E QUIPMENT C ODES These tables contain the manufacturer codes for programming the remote to control your TV, a VCR, DVD player, or audio amplifier. Every attempt has been made to include all codes. If your equipment brand is not listed or if the codes do not work, the remote may not control your ...

14 TV C ODES (C ONTINUED ) Scott 526 534 541 600 652 654 655 657 662 682 696 701 Sears 523 534 542 563 590 595 601 604 617 627 631 635 645 646 650 652 654 656 682 683 688 691 703 725 726 Seimitsu 627 Sharp 521 526 585 605 607 628 629 652 654 655 658 739 740 741 777 794 803 835 836 898 913 Shogun 652...

17 JVC 637 703 725 786 827 Kenwood 676 691 726 728 774 795 828 829 830 831 832 840 842 Magnavox 654 705 Marantz 651 764 845 Nakamichi 671 NEC 716 Onkyo 642 660 662 678 785 788 790 791 792 796 801 846 Optimus 648 664 Panasonic 643 644 652 783 797 798 799 808 810 815 816 817 818 819 820 821 822 824 82...

18 TV/VCR/DVD C OMBO C ODES Programming for combination equipment : Program the remote control in TV mode using the TV code, then in VCR mode using the VCR code, and then DVD in AUX mode (press 1 before entering the DVD code) using the DVD code. TV/DVD C OMBO C ODES Programming for combination equip...

20 T ROUBLESHOOTING What’s Happening What’s Wrong What You Can Do While doing remote control procedure, the remote control stops working. • If you don’t press a button for 20 seconds in a programming sequence, the remote shuts off its programming function. Start over again. When you press a button o...

23 DISH N ETWORK ’ S E XCHANGE P ROGRAMS DISH Network offers two options if you need to replace your remote control: the Advanced Exchange Program and the Post Receipt Exchange Program. Advance Exchange Program The Advanced Exchange Program allows you to have a replacement remote shipped immediately...

24 d. We will: • Check the remote control, including whether it is covered under the warranty. • Replace any remote we find is defective with a new or refurbished remote, if the defective remote is covered under the warranty. We will ship the replacement remote at our expense. • If a defective remot...

To read out your remote codes, see page 9 for instructions. If you enter a “1” as the last number of your code, your remote is in Limited Mode (see page 3 for more details).