Dewalt D25113K- Manuals

9 E N G L I S H Your D E WALT tool is double insulated in accordance with EN 50144; therefore no earth wire is required. Using an extension cable If an extension cable is required, use an approved extension cable suitable for the power input of this tool (see technical data). The minimum conductorsi...

10 E N G L I S H We recommend to use professional accessories only. • Clean and grease the bit shank. • Insert the bit shank into the tool holder (6).• Push the bit down and turn it slightly until it fits into the slots. • Pull on the bit to check if it is properly locked. The hammering function req...

11 E N G L I S H Be aware of the location of pipework and wiring.Apply only a gentle pressure to the tool (approx. 5 kg). Excessive force does not speed up drilling but decreases tool performance and may shorten tool life. Do not drill or drive too deep to prevent damage to the dust cover.Always hol...

12 E N G L I S H • Insert the appropriate screwdriver bit. When driving slotted head screws always use bits with a finder sleeve. • Gently press the variable speed switch (1) to prevent damage to the screw head. In reverse (LH) rotation the tool speed is automatically reduced for easy screw removal....