DeLonghi PrimaDonna ESAM 6600- Manuals

Page 2 - C o l l e c t i o n; DESCRIPTION OF THE APPLIANCE (SEE PAGE 3); Control Panel; SAFETY WARNINGS

C o l l e c t i o n 24 1 DESCRIPTION OF THE APPLIANCE (SEE PAGE 3) A. Grinding coarseness regulator B. Coffee beans container C. Bean container lid D. Central lid for ground coffee E. Compartment for measure F. Cup warmer tray G. Ground coffee funnel H. Milk container lid/milk frother I. Frothed mil...

Page 3 - INSTALLATION; The first time you use the appliance, select the language.; PRESS OK TO INSTALL ENGLISH; While the message is displayed, press the; button (fig. 1) for at least three seconds until you hear a BEEP; ENGLISH INSTALLED; OK; TURNING OFF PLEASE WAIT

C o l l e c t i o n 25 3 INSTALLATION • After unpacking, make sure the appliance is complete and undamaged. If in doubt, do not use it.Contact professionally qualified personnel. • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of the reach of children asthey are a sa...

Page 4 - TURNING ON AND PREHEATING; HEATING UP PLEASE WAIT; PREPARING COFFEE (USING COFFEE BEANS) AND USEFUL TIPS; If the coffee is delivered a drop at a time or not at all,; you turn the appliance on

C o l l e c t i o n 26 6. Fill the container with coffee beans (fig. 5) taking care not to exceed the "MAX" line.. IMPORTANT: to prevent malfunction, never fill with ground coffee, freeze dried coffee, caramelised beans or anything else which could damage the appliance. 5 TURNING ON AND PREH...

Page 5 - delivery can be stopped; when the appliance displays:; FILL TANK; EMPTY GROUNDS CONTAINER; BEEP; GROUND TOO FINE ADJUST MILL AND

C o l l e c t i o n 27 to preheat the infuser by pressing the button (fig. 12).Run off the water into the underlying drip tray or alternatively use this water to fill the cup to be used forthe coffee, so as to preheat it. • Unless preheated, do not use cups that are too thick, as they will absorb to...

Page 6 - CHANGING THE QUANTITY OF COFFEE IN THE CUP; two short coffees (when the button is pressed); REGULATING THE COFFEE MILL; Select the ground coffee function by pressing the /; flashes on the display. This disables the coffee mill function.

C o l l e c t i o n 28 7 CHANGING THE QUANTITY OF COFFEE IN THE CUP The appliance is factory preset to automatically deliver the following quantities of coffee:- two short coffees (when the button is pressed); - long coffee (when the button is pressed); - two short coffees (when the button is presse...

Page 7 - 0 PRODUCING HOT WATER; HOT WATER; 1 CHANGING THE QUANTITY OF HOT WATER; HOT WATER PROGRAM QUANTITY; 2 PREPARING CAPPUCCINOS (FROTHED MILK AND COFFEE); CAPPUCCINO: CONTAINER POINTER IN position 1

C o l l e c t i o n 29 NOTE 3: When dosing the quantity of coffee to be added, use the measure supplied only. NOTE 4: Use ground coffee for espresso coffee makers only. Do not use coffee beans, freeze-dried coffee or other materials that could damage the appliance. NOTE 5: If you add more than one m...

Page 8 - CLEANING; 3 PREPARING LATTE MACCHIATO (MILK WITH COFFEE) OR CAFFELATTE; latte macchiato: CONTAINER POINTER IN position 2; 4 PREPARING FROTHED MILK AND HOT MILK (WITHOUT COFFEE)

C o l l e c t i o n 30 NOTE 1: While preparing the cappuccino, frothed milk or coffee run off can be interrupted by pressing the CAPPUCCINO button. NOTE 2: If you run out of milk while delivering frothed milk, remove the container and refill it. Then put it back in place and press the CAPPUCCINO but...

Page 9 - 6 CLEANING AND MAINTENANCE; Cleaning the coffee maker

C o l l e c t i o n 31 • Once the required quantity of coffee has been run off, press the button selected previously. Coffee deliverystops and the quantity is memorised. A double “ BEEP ” confirms that the new values have been memorised. The appliance is now re-programmed with the new settings and d...

Page 10 - CORRECT; CORRECTLY; 7 CHANGING AND SETTING THE MENU PARAMETERS

C o l l e c t i o n 32 Check that the two red buttons have snapped out, otherwise the door cannot be closed.. CORRECT INCORRECT The two red buttons have snapped out CORRECTLY The two red buttons have notsnapped out • replace the drip tray, complete with the grounds container; • close the service doo...

Page 11 - DESCALE

C o l l e c t i o n 33 17.1 Setting the clock To set the clock, proceed as follows:• Press the P button, then press the button (corresponding to the symbol flashing on the display) repeatedly until the menu arrow is on: CLOCK 00:00 • Press the button (corresponding to the SET symbol flashing on the ...

Page 12 - IMPORTANTE

C o l l e c t i o n 34 • press the OK button. Descaler runs off from the hot water spout into the container below. The appliance displays: APPLIANCE IN DESCALE • the descale programme automatically performs a series of run offs and pauses to remove lime scaledeposits from inside the coffee maker. • ...

Page 13 - WATER HARDNESS 4; RESET TO DEFAULT YES; beep on; 8 CHANGING THE LANGUAGE

C o l l e c t i o n 35 17.6 Setting water hardness The descale message is displayed after the appliance has been operated for a factory set period of time calcu-lated on the basis of the maximum quantity of lime scale which may be contained in the water used. If neces-sary, this period of operation ...

Page 14 - 9 MEANING OF MESSAGE DISPLAYED AND WHAT TO DO; MESSAGE

19 MEANING OF MESSAGE DISPLAYED AND WHAT TO DO ADD PRE-GROUND COFFEE • With the function selected, the pre-ground coffee has not been poured intothe funnel. • Add the ground coffee as described inparagraph 9. FILL BEANS CONTAINER • The coffee beans have run out. • If the coffee grinder is very noisy...

Page 15 - 0 PROBLEMS TO BE RESOLVED BEFORE CALLING THE SERVICE CENTRE; PROBLEM; The coffee is not hot

C o l l e c t i o n 37 20 PROBLEMS TO BE RESOLVED BEFORE CALLING THE SERVICE CENTRE If the appliance is not working and an alarm light is on, the causes of the malfunction can be identified andresolved by referring to section 19. If, on the other hand, no alarm light is on, run the following checks ...