DeLonghi MAGNIFICA ESAM 3500- Manuals

Page 2 - SAVE THESE INSTRUCTIONS; THIS PRODUCT IS FOR HOUSEHOLD USE ONLY

7 SHORT CORD INSTRUCTIONS - A short power cord is provided to reduce risks resulting from becoming entangled in or tripping overa longer cord. - Longer, detachable power supply cords or extension cords are available and may be used if care isexercised in their use. - If an extension cord is used, th...

Page 4 - INSTALLATION; USING FOR THE FIRST TIME; PRESS OK TO INSTALL ENGLISH

9 3 INSTALLATION • After unpacking, make sure the appliance is complete and undamaged. If in doubt, do not use it. Contact professionally qualified personnel. • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of the reach of children as they are a safety hazard. • Plac...

Page 5 - TURNING OFF PLEASE WAIT; TURNING ON AND PREHEATING; READY regular TASTE; PREPARING COFFEE (USING COFFEE BEANS)

10 5. The appliance displays: TURNING OFF PLEASE WAIT and it goes off. 6. Fill the coffee bean container with coffee beans (fig. 5). IMPORTANT: to prevent malfunction, never fill with ground coffee, freeze dried coffee, caramelized beans or anything else which could damage the appliance. 5 TURNING O...

Page 6 - FILL TANK; GROUND TOO FINE ADJUST MILL AND

11 NOTE 2: If the coffee is delivered too fast and is not creamy enough, turn the grinding coarseness regulator (fig. 12) one click counterclockwise (see section 8).Avoid turning the grinding coarseness regulator excessively otherwise when you select 2 cups, the coffee mayrun out in drips. The grind...

Page 7 - If the appliance malfunctions,; CHANGING THE QUANTITY OF COFFEE IN THE CUP

12 When using the appliance for the first time, 4-5 cups of coffee need to be made before the applian-ce starts to give satisfying results. If the appliance malfunctions, do not contact the service center right away. The problem can almost always be resolved by following the instructions indicated i...

Page 8 - 0 PRODUCING HOT WATER; HOT WATER

13 9 PREPARING ESPRESSO/COFFEE WITH PRE-GROUND COFFEE (INSTEAD OF BEANS) • Press the button (fig. 16) to select the ground coffee function. This disables the coffee mill function. The appliance displays: READY PRE-GROUND • Lift the lid in the center, place one measuring scoop of ground coffee in the...

Page 9 - 1 CHANGING THE QUANTITY OF HOT WATER; HOT WATER PROGRAM QUANTITY; 2 PREPARING CAPPUCCINOS OR LATTE (MILK WITH COFFEE ); Never; CAPPUCCINO OR LATTE; CLEANING

14 11 CHANGING THE QUANTITY OF HOT WATER The appliance is factory preset to automatically deliver 8.5 oz of hot water.To change these quantities, proceed as follows:• Attach the water spout (fig. 4).• Position a container under the spout (fig. 3).• Press the button for at least 8 seconds then releas...

Page 10 - 3 PREPARING FROTHED MILK (WITHOUT COFFEE); MILK FROTHING; 4 CHANGING THE QUANTITY OF COFFEE AND MILK FOR CAPPUCCINOS; MILK FOR CAPPUCCINO PROGRAM QUANTITY; COFFEE FOR CAPPUCCINO PROGRAM QUANTITY; 5 CLEANING AND MAINTENANCE; Cleaning the coffee maker

15 NOTE 4: To change the quantity of coffee or milk delivered automatically into the cup, follow the instructions in section 14. 13 PREPARING FROTHED MILK (WITHOUT COFFEE) • Remove the lid of the milk container.• Fill the container with the quantity of milk you want to prepare (fig.19).• If you want...

Page 11 - CORRECTLY

16 CORRECT INCORRECT The two red buttons have snapped out CORRECTLY The two red buttons have notsnapped out Clean the nozzle regularly with a sponge as shown in fig. 26. 15.2 Cleaning the infuser The infuser must be cleaned regularly to avoid the build-up of coffee encrustations which could cause ma...

Page 12 - 6 CHANGING AND SETTING THE MENU PARAMETERS

17 16.1 Setting the clock To set the clock, proceed as follows:• Press the button (the light over the button comes on) then press the button repeatedly until the appliance displays: CLOCK 00:00 • Press the button to set the clock. (If you hold the button down, the time is changed rapidly). • Press t...

Page 13 - OK; APPLIANCE IN DESCALE

18 START TIME 00:00 • Press the button to set the auto-start time. (If you hold the button down, the time is changed rapidly). • Press the button to confirm the value;• Press once and the appliance displays the message: AUTO-START NO Press the button to modify the function (the appliance displays: A...

Page 14 - RINSING; WATER HARDNESS 4

19 • Empty the collection container and put it back under the hot water spout.• Press the OK button. Hot water is delivered from the spout into the container below and the appliance displays: RINSING • When the water tank is empty, the appliance displays the message: RINSING COMPLETE PRESS OK • Pres...

Page 15 - MESSAGE

16.7 Resetting factor y default settings (reset) If you change the original values, the factory default values can be reset as follows:• Press the button (the light over the button comes on) then press repeatedly until the applian- ce displays: RESET TO DEFAULT NO • Press the button and the applianc...