DeLonghi EUROCHEF - PRO - Manuals

Page 2 - EUROCHEF - PRO WALL HOOD; HOODS; WEIGHT; ACCESSORIES; MODEL NUMBER; FEATURES

2 Air-2 EUROCHEF - PRO WALL HOOD HOODS WEIGHT MODEL NUMBER 24” range hood with 600 CFM blower 22 lbs EC PH24S 30” range hood with 600 CFM blower 30 lbs EC PH30S 36” range hood with 600 CFM blower 36 lbs EC PH36S 48” range hood with 1200 CFM blower 48 lbs EC PH48S ACCESSORIES MODEL NUMBER WARMING LAM...

Page 4 - CONTENTS AND PAGE NUMBER

4 Air-2 EUROCHEF - PRO WALL HOOD CONTENTS AND PAGE NUMBER Product Dimensions....................................................... pg.4 Advance Planning...........................................................pg.5 Using Duct Cover Accessories........................................ pg.5 Tools and...

Page 5 - ADVANCE PLANNING; USING DUCT COVER ACCESSORIES; To avoid gaps, plan the hood installation height for duct cover use.; Duct cover 6”; TOOLS AND MATERIALS REQUIRED (NOT SUPPLIED)

5 Air-2 EUROCHEF - PRO WALL HOOD Cabinetry and electrical placement for 24-inch deep wall hoods. l n s t a l l a t i a ndimensionsfor 24 deepwall hoods. ADVANCE PLANNING USING DUCT COVER ACCESSORIES To avoid gaps, plan the hood installation height for duct cover use. Recirculating Kit Cover 4” (if u...

Page 6 - REMOVE THE RANGEHOOD; Locate the parts packed with the hood.; Parts Included with your Hood

6 Air-2 EUROCHEF - PRO WALL HOOD REMOVE THE RANGEHOOD PARTS PROVIDED Locate the parts packed with the hood. no. 4 screws to fix duct transition (torx 20) 3,9 x 9,5 mm no.3 screws and no.3 wall anchors (Philips) M5 x 57 mm Screws to hang and secure hood to the Wood Bracket (torx 20) 4,5 x 20 mm no. 4...

Page 7 - OTHER PREPARATIONS; JUNCTION BOX LOCATION:; REMOVE FILTER FRAME

7 Air-2 EUROCHEF - PRO WALL HOOD STEP 1 DETERMINE HOOD, DUCTWORKAND WIRING LOCATIONS • Use a level to draw the cooktop centerline vertically up thewall to the ceiling. • Measure desired distance from the bottom of the hood tothe cooking surface, 24" min. to 36" max. Note: If installing with ...

Page 8 - BLOWER POSITION CHART; Hood size; Recirculating Kit option Top ducting option Rear ducting option

8 Air-2 EUROCHEF - PRO WALL HOOD model 30 36model 48 two blowers VerticalDischarge(with BlowerUpgrade Kit) BLOWER POSITION CHART model 24Vertical Discharge BLOWER POSITION OPTION model 30 36Vertical Discharge Hood size Motor Recirculating Kit option Top ducting option Rear ducting option 24” 1 YES Y...

Page 9 - IF CHANGING BLOWER POSITION; motor; BLOWER UPGRADE KIT 30” AND 36” HOODS

9 Air-2 EUROCHEF - PRO WALL HOOD IF CHANGING BLOWER POSITION WARNING: • disconnect the motor before changing position; reconnectafter it is moved. ATTENTION: Débrancher le moteur avant de changer de position, rebrancheraprès le changement de position A “A” : remove bracket knock outbefore fixing 2 n...

Page 10 - AFFIXING THE HOOD MOUNTING SCREWS; Test Duct Cover Fit (do not install Duct covers); INSTALL HOOD ONTO WALL (see enclosed template)

10 Air-2 EUROCHEF - PRO WALL HOOD • Secure the Wood Bracket to 2 or more vertical studs, using at least 2 of the 4 supplied long screws. IMPORTANT: Screws must penetrate at least 1-1/2" into verti- cal studs. Countersink screws into support. AFFIXING THE HOOD MOUNTING SCREWS I M P O R TA N T: F ...

Page 11 - INSTALL HOOD TO SOFFIT OR BENEATH CABINETS; SKIP THIS STEP IF USING WALL MOUNTING METHOD; Centerline to Stud; Mount Hood onto Soffit or Cabinet

11 Air-2 EUROCHEF - PRO WALL HOOD STEP 3B: ALTERNATE MOUNTINGMETHOD INSTALL HOOD TO SOFFIT OR BENEATH CABINETS SKIP THIS STEP IF USING WALL MOUNTING METHOD When necessary, the hood may be installed so that it issupported by the soffit.• The soffit should be constructed with 2 x 4’s. • Determine the ...

Page 12 - ASSEMBLY AND INSTALLATION; holes in front and side of hood into covers.; INSTALL DUCT COVERS; Be sure that screws do not hamper the; CONNECT ELECTRICAL; Verify that power is turned off at the source.; WARNING; Use wire nuts to connect incoming ground, neutral and hot.

12 Air-2 EUROCHEF - PRO WALL HOOD ASSEMBLY AND INSTALLATION OF THE DUCT COVERS & RECIRCULATING KIT COVER Optional duct covers shown in advance planning section maybe used to fill the space between the hood and ceiling in wallmount installations. 6" and 12" high duct covers are availablea...

Page 13 - • Use screws removed in Step 2 to re-install Filter Frame, per; TIGHTEN - HANGING SCREWS; With Filter Frame still removed from Step 2; IMPORTANT; : If Installing optional Backsplash Kit install this; Install Bottom Wall Anchors

13 Air-2 EUROCHEF - PRO WALL HOOD • Use screws removed in Step 2 to re-install Filter Frame, per photograph. STEP 7: TIGHTEN - HANGING SCREWS STEP 8: RE-INSTALL THE FILTER FRAME • With Filter Frame still removed from Step 2 • Adjust hood up to eliminate any gaps at ceiling. Tightenhanging screws. • ...

Page 14 - TEST FUNCTION OF HOOD; • To remove the filters, grasp the handle, push the filter up and

14 Air-2 EUROCHEF - PRO WALL HOOD STEP 10: TEST FUNCTION OF HOOD - Blower- Light STEP 9: INSTALL FILTER • Place filter drip trays into the bottom rear of the hood.• Insert top of grease filter first, than rotate bottom filter and drop into grease tray. • To remove the filters, grasp the handle, push...

Page 15 - CARE AND USE; Light; DELAYED SHUTOFF; ROTATE; • After waiting for lamp to be cool, twist off lamp bezel as shown,; CLEANING FILTERS

15 Air-2 EUROCHEF - PRO WALL HOOD CARE AND USE REPLACING HALOGEN BULB OPERATION Press any speed to turn hood on. Press same button to turnhood off. Active speed is shown by a button back light. CONTROL: 1. 1 Speed2. 2 Speed3. 3 Speed4. 4 Speed Light DELAYED SHUTOFF By pressing down on any speed key ...