DeLonghi ECAM 24.210.SB- Manuals

10 for there to be traces of coffee in the mill� The machine is, however, guaranteed to be new� • You should customise water hardness as soon as possible following the instructions in the section “Setting water hardness” on page 17� Follow the instructions: 1� Remove the water tank, fill to the MAX ...

11 Auto-off Please note The appliance is set to turn off automatically if not used for 2 hours� The time can be changed so that the appliance switches off after 15 or 30 minutes, or after 1, 2 or 3 hours� 1� Press the P button to enter the menu; 2� Turn the selection knob (fig� 8) until the light co...

12 - how many times the water softener filter has been replaced� 5� The quantities are indicated by the flashing beans as follows: Example: you want to know how many cof- fees have been made� Enter the menu and select the light� Count the flashes of the beans - 137 coffees have been made� 6� Press t...

13 tips for a hotter coffee For a hotter coffee, before delivery you are rec- ommended to: • rinse the appliance through by pressing the button� Hot water flows out of the coffee spouts and heats the internal circuit of the machine so that the coffee delivered will be hotter� • warm the cups with ho...

14 To avoid milk with poor froth or large bub- bles, always clean the cappuccino maker as described in the section “Cleaning the cap- puccino maker after use”� 3� Press the button� The light flashes� 4� After a few seconds, the light flashes telling you to turn the steam knob� Immerse the cappuccino...

15 alcohol to clean the coffee maker� With De’Longhi superautomatic coffee mak- ers, you need not use chemical products to clean the machine� The descaler recommended by De’Longhi is made from natural and completely biode- gradable substances� • None of the components can be washed in a dishwasher� ...

16 Important! The infuser may not be extracted when the ma- chine is on� 1� Make sure the machine is correctly turned off (see “Turning the appliance off” on page 10)� 2� Remove the water tank� 3� Open the infuser door (fig� 27) on the right side� 4� Press the two red release buttons inwards and at ...

17 9� Press the button to confirm introduc- tion of the solution� The light flashes telling you to turn the steam knob� 10� Turn the steam knob to the I position The descaling programme starts and the descaler liquid comes out of the cappuccino maker� The descale programme automatically per- forms a...

18 12� Turn the steam knob and press the button� 13� At the end of delivery, the light flashes� Close the knob and the appliance returns au- tomatically to the “ready for coffee” state� The new filter is now active and you can use the coffee maker� Removing the filter If you want to continue using t...

19 eXPlAnAtIon oF lIGhts lIGht PossIBle CAUse RemeDY Insufficient water in the tank� Fill the tank with water and insert it correctly, pushing it as far as it will go until it clicks into place� The tank is not correctly in place� Insert the tank correctly and press as far as it will go� The grounds...

21 tRoUBleshootInG Below is a list of some of the possible malfunctions� If the problem cannot be resolved as described, contact Customer Services� PRoBlem PossIBle CAUse RemeDY The coffee is not hot The cups were not preheated� Warm the cups by rinsing them with hot water (Please note you can use t...