DeLonghi ECAM 23.420.SB- Manuals

10 turnInG the APPlIAnCe on Please note: Before turning the appliance on, make sure the main switch on the back of the appliance is in the I position (fig. 1).Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which can- not be interrupted. The appliance is ready ...

12 the machine each time the button is pressed or an accessory is inserted/removed. The beep is active by default. 1. Press the P button to enter the menu; 2. Turn the selection knob (fig. 8) until “Beep” is displayed; 3. Press the button. “Deactivate?” or “Acti- vate?” is displayed; 4. Press the bu...

14 4. Press the 1 cup coffee button (fig. 12). 5. Preparation begins. The amount of coffee se- lected is displayed together with a progress bar which gradually fills as preparation pro- gresses. mAkInG CAPuCCIno And hot mIlk (not Frothed) Important! Danger of burns During preparation, steam is given...

15 1. Place a container under the cappuccino ma- ker (as close as possible to avoid splashes) (fig. 17). 2. Turn the steam knob to the I position (fig. 4). “HOT WATER...” is displayed and delivery begins. 3. Stop by turning the steam knob to the 0 po- sition. Please note: If “Energy Saving” mode is ...

16 2. Remove the residues with a vacuum cleaner (fig. 25). Cleaning the water tank 1. Clean the water tank (A9) regularly (about once a month and whenever you replace the water softener filter (if provided) with a damp cloth and a little mild washing up liquid. 2. Remove the filter (if present) and ...

17 Please note: Use De’Longhi descaler only. Under no circumstances should you use sulpha- mic or acetic based descalers. Their use invalida- tes the guarantee. Failure to descale the appliance as described also invalidates the guarantee. 1. Turn the machine on. 2. Press the P button to enter the me...

18 16. Turn the steam knob (fig. 4) to the “0” posi- tion. The appliance returns automatically to the “ready for coffee” state. The new filter is active and indicated by an aste- risk displayed under “Install filter”. You can now use the coffee maker. replacing the filter When “REPLACE FILTER!” is d...

20 dIsPlAYed messAGes dIsPlAYed messAGe PossIBle CAuse remedY FILL TANK ! • Insufficient water in the tank. • Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place (fig. 3). EMPTY GROUNDS CONTAINER • The grounds container (A13) is full. • Emp...

21 trouBleshootInG Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services. ProBlem PossIBle CAuse remedY The coffee is not hot • The cups were not preheated. • Warm the cups by rinsing them with hot water (N.B. you can use the ...