DeLonghi EAM3500- Manuals

9 3 INSTALLATION • After unpacking, make sure the appliance is complete and undamaged. If in doubt, do not use it. Contact professionally qualified personnel. • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of the reach of children as they are a safety hazard. • Plac...

10 5. The appliance displays: TURNING OFF PLEASE WAIT and it goes off. 6. Fill the container with coffee beans (fig. 5). IMPORTANT: to prevent malfunction, never fill with ground coffee, freeze dried coffee, caramelized beans or anything else which could damage the appliance. 5 TURNING ON AND PREHEA...

11 NOTE 2: If the coffee is delivered too fast and is not creamy enough, turn the grinding coarseness regulator (fig. 12) one click counterclockwise (see section 8).Avoid turning the grinding coarseness regulator excessively otherwise when you select 2 cups, the coffee mayrun out in drips. NOTE 3: T...

12 When using the appliance for the first time, 4-5 cups of coffee need to be made before the applian-ce starts to give satisfying results. If the appliance malfunctions, do not contact the service center right away. The problem can almost always be resolved by following the instructions indicated i...

13 9 PREPARING ESPRESSO/COFFEE WITH PRE-GROUND COFFEE (INSTEAD OF BEANS) • Press the button (fig. 16) to select the ground coffee function. This disables the coffee mill function. The appliance displays: READY PRE-GROUND • Lift the lid in the center, place one measuring scoop of ground coffee in the...

14 11 CHANGING THE QUANTITY OF HOT WATER The appliance is factory preset to automatically deliver 8.5 oz of hot water.To change these quantities, proceed as follows:• Attach the water spout (fig. 4).• Position a container under the spout (fig. 3).• Press the button for at least 8 seconds then releas...

15 NOTE 4: To change the quantity of coffee or milk delivered automatically into the cup, follow the instructions in section 14. 13 PREPARING FROTHED MILK (WITHOUT COFFEE) • Remove the lid of the milk container.• Fill the container with the quantity of milk you want to prepare (fig.19).• If you want...

16 CORRECT INCORRECT The two red buttons have snapped out CORRECTLY The two red buttons have notsnapped out Clean the nozzle regularly with a sponge as shown in fig. 26. 15.2 Cleaning the infuser The infuser must be cleaned regularly to avoid the build-up of coffee encrustations which could cause ma...

17 16.1 Setting the clock To set the clock, proceed as follows:• Press the button (the light over the button comes on) then press the button repeatedly until the appliance displays: CLOCK 00:00 • Press the button to set the clock. (If you hold the button down, the time is changed rapidly). • Press t...

19 • Empty the full container and then put it back under the hot water spout.• Press the OK button. Hot water is run off from the spout into the container below and the appliance displays: RINSING • When the water tank is empty, the appliance displays the message: RINSING COMPLETE PRESS OK • Press t...

16.7 Resetting factor y default settings (reset) If you change the original values, the factory default values can be reset as follows:• Press the button then press repeatedly until the appliance displays: RESET TO DEFAULT NO • Press the button and the appliance displays "RESET TO DEFAULT YES:• ...

21 PRESS NEXT CHANGE • After cleaning, the infuser has probablybeen left out of the coffee maker. • Leave the service door closed and theinfuser out of the appliance, then followthe instructions displayed. CLOSE DOOR • The service door is open • If the service door cannot be closed,check that the in...

23 This warranty applies to all products with De’Longhi or Kenwood brand names. LIMITED WARRANTY What does the warranty cover? We warrant each appliance to be free from defects in material and workmanship. Our obligation underthis warranty is limited to repair at our factory or authorized service ce...

9 3 INSTALLATION • After unpacking, make sure the appliance is complete and undamaged. If in doubt, do not use it. Contact professionally qualified personnel. • The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of the reach of children as they are a safety hazard. • Plac...

10 5. The appliance displays: TURNING OFF PLEASE WAIT and it goes off. 6. Fill the container with coffee beans (fig. 5). IMPORTANT: to prevent malfunction, never fill with ground coffee, freeze dried coffee, caramelized beans or anything else which could damage the appliance. 5 TURNING ON AND PREHEA...

11 NOTE 2: If the coffee is delivered too fast and is not creamy enough, turn the grinding coarseness regulator (fig. 12) one click counterclockwise (see section 8).Avoid turning the grinding coarseness regulator excessively otherwise when you select 2 cups, the coffee mayrun out in drips. NOTE 3: T...

12 When using the appliance for the first time, 4-5 cups of coffee need to be made before the applian-ce starts to give satisfying results. If the appliance malfunctions, do not contact the service center right away. The problem can almost always be resolved by following the instructions indicated i...

13 9 PREPARING ESPRESSO/COFFEE WITH PRE-GROUND COFFEE (INSTEAD OF BEANS) • Press the button (fig. 16) to select the ground coffee function. This disables the coffee mill function. The appliance displays: READY PRE-GROUND • Lift the lid in the center, place one measuring scoop of ground coffee in the...

14 11 CHANGING THE QUANTITY OF HOT WATER The appliance is factory preset to automatically deliver 8.5 oz of hot water.To change these quantities, proceed as follows:• Attach the water spout (fig. 4).• Position a container under the spout (fig. 3).• Press the button for at least 8 seconds then releas...

15 NOTE 4: To change the quantity of coffee or milk delivered automatically into the cup, follow the instructions in section 14. 13 PREPARING FROTHED MILK (WITHOUT COFFEE) • Remove the lid of the milk container.• Fill the container with the quantity of milk you want to prepare (fig.19).• If you want...

16 CORRECT INCORRECT The two red buttons have snapped out CORRECTLY The two red buttons have notsnapped out Clean the nozzle regularly with a sponge as shown in fig. 26. 15.2 Cleaning the infuser The infuser must be cleaned regularly to avoid the build-up of coffee encrustations which could cause ma...

17 16.1 Setting the clock To set the clock, proceed as follows:• Press the button (the light over the button comes on) then press the button repeatedly until the appliance displays: CLOCK 00:00 • Press the button to set the clock. (If you hold the button down, the time is changed rapidly). • Press t...

19 • Empty the full container and then put it back under the hot water spout.• Press the OK button. Hot water is run off from the spout into the container below and the appliance displays: RINSING • When the water tank is empty, the appliance displays the message: RINSING COMPLETE PRESS OK • Press t...

16.7 Resetting factor y default settings (reset) If you change the original values, the factory default values can be reset as follows:• Press the button then press repeatedly until the appliance displays: RESET TO DEFAULT NO • Press the button and the appliance displays "RESET TO DEFAULT YES:• ...

21 PRESS NEXT CHANGE • After cleaning, the infuser has probablybeen left out of the coffee maker. • Leave the service door closed and theinfuser out of the appliance, then followthe instructions displayed. CLOSE DOOR • The service door is open • If the service door cannot be closed,check that the in...

23 This warranty applies to all products with De’Longhi or Kenwood brand names. LIMITED WARRANTY What does the warranty cover? We warrant each appliance to be free from defects in material and workmanship. Our obligation underthis warranty is limited to repair at our factory or authorized service ce...