DeLonghi DEBIG 24 SS - Manuals

DeLonghi DEBIG 24 SS – Manual in PDF format online.

Manuals:

Manual

Manual DeLonghi DEBIG 24 SS

Summary

Page 2 - WHAT TO DO IF YOU SMELL GAS:; • Immediately call your gas supplier from a neighbor's phone.; IF THE INFORMATION IN THIS MANUAL IS NOT; WARNING

2 ✓ Do not store or use gasoline or other flammable vapors and liquidsin the vicinity of this or any other appliance. ✓ WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance.• Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier f...

Page 3 - improper, incorrect or illogical use of the appliance.

3 Dear Customer, Thank you for having purchased and given your preference to our product.The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full useof the features offered by your appliance. Please pre...

Page 4 - U S E R I N S T R U C T I O N S; OFF

4 U S E R I N S T R U C T I O N S IMPORTANT PRECAUTIONS AND RECOM-MENDATIONS After having unpacked the appliance, check to ensure that it isnot damaged.In case of doubt, do not use it and consult your supplier or a pro-fessionally qualified technician. Packing elements (i.e. plastic bags, polystyren...

Page 6 - CONTROL PANEL; c o n t r o l p a n e l; The oven can be used.; The oven cannot be used.

6 CONTROL PANEL (Fig. 1.1) 1. Oven thermostat knob 2. Oven light control knob3. Cooling fan warning light4. Electronic clock/electronic alarm Fig. 1.1 1 4 2 3 c o n t r o l p a n e l CAUTION: Gas appliances produce heat and humidity inthe environment in which they are installed. Ensure that the cook...

Page 7 - electronic clock/electronic alarm; ELECTRONIC CLOCK; ELECTRONIC ALARM; SETTING THE FREQUENCY OF THE ALARM SOUND

7 electronic clock/electronic alarm Fig. 2.1 ELECTRONIC CLOCK (fig. 2.1) The electronic alarm is a device which groups the functions of 12 hours clock with illu-minated display and 10 hours alarm. Upon immediate connection of the oven or after a blackout, 12•00 will flash on the dis- play. To set th...

Page 8 - h o w t o u s e t h e g a s o v e n; USING THE OVEN FOR THE FIRST TIME

8 h o w t o u s e t h e g a s o v e n Fig. 3.1 USING THE OVEN FOR THE FIRST TIME It is advised to follow these instructions: – Furnish the interior of the oven by placing the wire racks as described at chapter “Cleaning and maintenance”. – Insert shelves and tray. – Turn the oven on to the maximum t...

Page 9 - IGNITION OF THE OVEN BURNER; OVEN COOKING

9 Attention: the oven door becomes very hot during operation. Keep children away. IGNITION OF THE OVEN BURNER The thermostat allows the automatic control of the temperature.The gas delivery to the oven burner is controlled by a two way thermostatic tap (ovenand broil burners) with flame-failure devi...

Page 10 - IGNITION OF THE BROIL BURNER; OVEN LIGHT

10 IGNITION OF THE BROIL BURNER The broil burner generates the infra-red rays for broiling. To light the broil burner operate as follow: 1) Open the oven door to the full extent. WARNING: Risk of explosion! The oven door must be open during this operation. 2) Lightly press and turn the thermostat kn...

Page 11 - STEP; STEP

11 1 ° STEP Do not use 2 ° STEP Broiling level Oven cooking level Oven cooking level 3 ° STEP 4 ° STEP Fig. 3.7 BROILING Very important: the broil burner must always be used with the oven door closed. – Position the shelf on the second level from the top (fig. 3.7). – Turn on the broil burner, as ex...

Page 12 - c l e a n i n g a n d m a i n t e n a n c e; OVEN ACCESSORIES INSTALLATION AND REMOVAL

12 Do not use a steam cleanerbecause the moisture can get intothe appliance thus make it unsafe. GENERAL RECOMANDATION ✓ Important: Before any operation of cleaning and maintenance disconnect theappliance from the electrical supply. ✓ It is advisable to clean when the appliance is cold and especiall...

Page 13 - OVEN DOOR; REPLACING THE OVEN LIGHT; REMOVING THE OVEN DOOR; DOOR ASSEMBLY

13 L Fig. 4.4 Fig. 4.5 H Fig. 4.6 OVEN DOOR The internal glass of the oven door can be easily removed for cleaning by unscrewingthe two lateral fixing screws (fig. 4.3). Fig. 4.3 Do not store flammable material in the oven. REPLACING THE OVEN LIGHT Before any maintenance is started involving electri...

Page 14 - DO’S AND DO NOT’S; FOR YOUR SAFETY

14 DO’S AND DO NOT’S • Do always broil with the oven door closed. • Do read the user instructions carefully before using the oven for first time. • Do allow the oven to heat for one and a half hours, before using for the first time, in order to expel any smell from the new oven insulation, without t...

Page 15 - TOOLS NEEDED FOR INSTALLATION; I N S TA L L AT I O N I N S T R U C T I O N S

15 WARNING! THIS APPLIANCE HAS TO BE INSTALLED BY A QUALIFIED INSTALLER. Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult aqualified installer, service agent, or the gas supplier. IMPORTANT: The use of suitable protective clothing/g...

Page 16 - GENERAL INFORMATION; Electrical Requirement; ELECTRICAL GROUNDING INSTRUCTIONS

16 GENERAL INFORMATION 1. Installation must conform with local codes or, in theabsence of local codes, with the National Fuel Gas Code , ANSI Z223.1-Latest Edition. 2. Installation in manufactured (mobile) home: installation mustconform with the Manufactured Home Construction and Safety Standard, Ti...

Page 17 - i n s t a l l a t i o n; Taking care NOT to lift the; INSTALLATION TO THE CABINET

17 22" 11/64 (563.2 mm) (550 mm) 21" 5/8 25/32" (20 mm) 23" 3/16 with gas pressure regulator fitted 21" 49/64 24" (609.5 mm) (553 mm) 24" (609.5 mm) (589.5 mm) Fig. 5.1 Fig. 5.2 i n s t a l l a t i o n This oven may be installed to 24" minimum (609.5 mm) wide cabinets...

Page 19 - Explosion Hazard; g a s c o n n e c t i o n

19 Explosion Hazard Use a new CSA or UL approvedgas supply line. Install a shut-off valve. Securely tighten all gas connec-tions. If connected to LP, have a quali-fied person make sure gas pres-sure does not exceed 14" watercolumn. Examples of a qualified personinclude licensed heating per-sonne...

Page 20 - PRESSURE REGULATOR INSTALLATION; LOCK; Arrow

20 PRESSURE REGULATOR INSTALLATION LOCK Arrow STEP 1 Mount the 3/8” NPT (conical) male connector to the pressureregulator and tighten by using a wrench. Do not over tighten the connector. Over tightening may crack regulator. STEP 2 Assemble the 3/8” NPT connector + pressure regulator group to the ma...

Page 21 - WARNING: check the right positioning; GAS CONNECTION SPECIFICATION

21 Fig. 6.3 To mains connection Manifoldtest pointpressure1/8” NPT To oven Manifold male pipe fitting Connector Pressure regulator 1/2” G cylindrical (ISO 228-1) female 3/8” NPT (conical)male 3/8” NPT female 3/8” NPT female WARNING: check the right positioning of the gas regulator. The arrow on the ...

Page 23 - CONVERSION TO LP/PROPANE GAS; BURNERS

23 1 2 NATURAL GAS REGULATION LP/PROPANE REGULATION A Fig. 6.5 CONVERSION TO LP/PROPANE GAS Every oven is provided with a set of injectors for the various types of gas. Select the injectors to be replaced according to the "INJECTORS TABLE". The nozzle diameters, expressed in hundredths of a ...

Page 25 - ADJUSTMENT OF THE OVEN BURNER MINIMUM

25 ADJUSTMENT OF THE OVEN BURNER MINIMUM This needs to be done only for the oven burner (the broil is a fixed capacity) by actingon the thermostat in the following way: – Turn on the burner by setting the thermostat knob on position . – Remove the knob and unscrew the by-pass screw "G" (fig....

Page 26 - Recommended ground method; e l e c t r i c a l c o n n e c t i o n; Electrical Shock Hazard

26 If codes permit and a separate ground wire is used, it is recommended that aqualified electrician determine that the ground path is adequate.Check with a qualified electrician if you are not sure whether the oven is proper-ly grounded.Do Not ground to a gas pipe. A 120-volt, 60-Hz, AC-only, 15-am...

Page 27 - EC; TL; Electric diagram key

27 M T AS CF P2 2 P1 1 LF N/7 L/8 S MS PA F EC A TL 1131550 Electric diagram key F Switch MS Security switch AS Air switch LF Oven lamp CF Cooling fan EC Electronic clock PA Ignition switch A Ignition coil TL Thermal overload S Cooling fan failure lamp M Terminal block T Earth connection ELECTRIC DI...