Dakota Digital UTV-1000 - Manuals

Dakota Digital UTV-1000 – Manual in PDF format online.

Manuals:

Manual Dakota Digital UTV-1000

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 2 - page 2; Be sure to check engine oil level and add oil if needed

page 2 MAN#650231:A INSTALLATION: 1. Disconnect the battery to prevent possible damage to the electrical system or gauge during install. 2. Remove the stock gauge or indicator panel (see service manual for removal instructions). The UTV gauge will mount in this mounting location. 3. Remove the seats...

Page 3 - page 3; SETUP

page 3 MAN#650231:A 6. Fuel sender installation (optional tube sender from Dakota Digital): a. To mount the sensor you will need to drill a hole in the fuel tank. Use a 1” hole saw, and drill a hole adjacent to the small dimple on the gas tank closest to the passenger side of the vehicle. Use a fuel...

Page 4 - page 4

page 4 MAN#650231:A Pulls up all values  on speed and speed pulses in odometer Press Right switch to finish cal and save value ADJUST Adjust speed cal while driving ADJUST Each press of left switch toggles direction of adjustment, right switch to save and exit SRV MI ( SRV KM ) Sets value of servi...

Dakota Digital Manuals