Dakota Digital MCL-36K-TCH - Manual

Dakota Digital MCL-36K-TCH – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Thank you for purchasing the Dakota Digital MCL-36K-TCH gauge for your Harley Davidson Touring bike. This gauge
is designed to be a direct, plug in replacement for all touring models from 2004 – 2011. This is part of a six gauge
package for touring models so you can add additional gauges as you choose.

INSTALLATION

First read and familiarize yourself with all of the components and this manual. The first step is to remove the

seat and disconnect the negative side of the battery, as with any electronic install. Once the battery is disconnected you
are ready to start.

Remove the outer fairing; this will vary from model to model, so please follow the service manual to expose the

wiring and gauges. Don’t be alarmed by the amount of wires behind the fairing, this is a direct plug in gauge and these
detailed instructions will guide you through it.

Street Glide with outer fairing removed

Road Glide with outer fairing removed

REMOVAL OF FACTORY GAUGE

ULTRA FLHT & FLHX (STREET GLIDE batwing fairings)
Unplug the tachometer. Remove the screws securing the clamp that holds the gauge in place and pull it out through the
front of the fairing. Save the screws, gasket, and clamp to be reused when you install the new Dakota Digital gauge.

Unplug the factory tachometer Unscrew the clamp and remove gauge

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - FUNCTION SWITCH; GAUGE SETUP AND CALIBRATION; FACTORY DEFAULT SETTINGS FOR SETUP MENUS

3 MAN#650335 FUNCTION SWITCH If an MCL-36K-SPD gauge is installed, then the factory speedometer push button switch is used as the main function switch, otherwise a push button switch should be connected and mounted to allow access to all of the gauge features. The function switch is used for setup a...

Page 4 - Display update setup

4 MAN#650335 TACHOMETER SETUP Main Menu Sub Menu Description CL set clock time tCH nIgHt set night dimming level vPdAtE set RPM update rate for digital readout WXArn set RPM shift warning point gEAr transmission gear programming Press and hold the switch while turning the key on. Release the switch....

Page 5 - and releasing the switch to store the gear position quicker.

5 MAN#650335 (Tachometer Setup Continued) W WW WX XX XArn Arn Arn Arn RPM warning setup • Press and release the switch until “ WXArn ” is displayed, then press and hold the switch until “ - “ is displayed. • Release the switch. The current warning point will be displayed. • Press and release the swi...