Dakota Digital MCL-3212 - Manuals

MAN# 650378 MOUNTING The gauge will mount using the original housing, grommet, and screws. Unbolt the two screws from the back plate at the back of the gauge housing, then unplug the factory gauge, noting the position of the grommets. There is one grommet on the front between the gauge and housing a...

MAN# 650378 SPEED CALIBRATION The speed calibration is not required unless you have changed out the stock transmission, pulley, or tires. ADJvST ADJvST ADJvST ADJvST Adjust • Press and release the switch until “ AdJvSt ” is displayed, then press and hold the switch until “ - ” is displayed. • Releas...

MAN# 650378 Set FC Set FC Set FC Set FC Temperature sender setup The temperature gauge can read the stock head temperature sensor from the ECM. • Press and release the switch until “ Set FC ” is displayed, then press and hold the switch until “ - ” is displayed. • Release the switch. The current sen...