Dakota Digital CMD-4000 - Manuals

2 WIRING HARNESS COLOR CODE. 10 pin connector RED constant 12 volt battery source BLACK chassis ground YELLOW ignition key switched 12 volts VIOLET CHANNEL 7 relay (optional) WHITE/BLACK CHANNEL 6 relay (optional) BLUE CHANNEL 5 relay (optional) BROWN CHANNEL 4 relay (optional) ORANGE CHANNEL 3 rela...

GREEN CHANNEL 2 RED: +12 BATTERY OUTSIDE EMERGENCY RELEASE SWITCH DRIVER'S DOOR MOTOR (PDR-1 shown) +12 BATTERY RED FUSE BROWN CHANNEL 1 GROUND GROUND GREEN BLUE SPLICE SPLICE BLACK These channels must be connected to relays if they are used. YELLOW: IGNITION safety disable BLACK: GROUND PURPLE BROW...

DIP SWITCH SETTINGS For optimal performance, all switches should be in the “OFF” position. If any switches are in the “ON” position damage or incorrect operation may occur to the attached components. TRANSMITTER PROGRAMMING All of the transmitters to be programmed into the system should be available...