Crimestopper SP-500 - Manuals

Crimestopper SP-500 – Manual in PDF format online.

Manuals:

Manual

Manual Crimestopper SP-500

Summary

Page 2 - TABLE OF CONTENTS; OPERATION CAUTIONS & WARNINGS; and its

2 TABLE OF CONTENTS Operation Cautions & Warnings……..…………..……………………………………………………………………2 The Remote Controls……………….....…………..……………………………………………………………….…3-4 Setting the Clock………………...………………………….…………………………………………………..…...…..4 Quick Chart Button Functions...………………………….…………………………………………………..…...…..5 Oper...

Page 3 - THE REMOTE CONTROLS; nd FUNCTION; START

3 THE REMOTE CONTROLS 2-WAY - PAGER / REMOTE TRANSCEIVER: 1-WAY - SIDEKICK REMOTE: START / AUX 2 2nd FUNCTION VEH 1 / VEH 2CLOCK SET TRUNK ARM /LOCK DISARM /UNLOCK 12:00 AM PM START TRUNK ARM /LOCK DISARM /UNLOCK 2nd FUNCTION VEH 1 / VEH 2

Page 4 - AM or PM

4 THE REMOTE CONTROLS 1-WAY - SIDEKICK REMOTE: The 1-W ay sidekick remote adds flexibility to your system. You can have the convenience of operating your system without needing to carry the larger pager remote. The Sidekick remote has less range and offers all of the same operation features except f...

Page 5 - QUICK CHART BUTTON FUNCTIONS; VEH

5 QUICK CHART BUTTON FUNCTIONS Button Button Functions Button Options Button Button Functions Button Options Lock Doors & Arm System Press and Hold 2 Seconds for Panic Mode 2nd Function Press and Hold for 2 seconds Unlock Doors & Disarm System Press twice for second door unlock VEH Selects b...

Page 6 - OPERATING INSTRUCTIONS - ALARM; beep to notify; you the vehicle has been tampered with.

6 OPERATING INSTRUCTIONS - ALARM Arming / Locking: Press the Lock Button on the remote control. The System will arm emit one siren chirp, one light flash, and the LED will begin to flash. Power locks will lock (if equipped). Starter disable circuit will turn on. The 2-W ay LCD Pager will beep once w...

Page 7 - Prior intrusion Alert

7 OPERATING INSTRUCTIONS - ALARM Prior intrusion Alert This system will notify you if the alarm was triggered while you were away. Upon disarming, there will be four additional siren chirps after the two normal disarm chirps. Check your vehicle for any signs of a break in or tampering. Also, see LED...

Page 9 - Valet Mode (Enter manually or using the remote); The alarm system must be

9 OPERATING INSTRUCTIONS - ALARM Dome Light Illumination (Optional) This feature will turn on the vehicle’s dome light upon disarming for 30 seconds or until the key is inserted and turned on. This will provide illuminated entry to your vehicle in dimly lit areas for safety and security. Emergency O...

Page 10 - REMO; REMOTE ENGINE CONTROL; TE ENGINE CONTROL; be turned off with remote transmitter.; IGN

10 REMO REMOTE ENGINE CONTROL TE ENGINE CONTROL Remote Start & Auxiliary Output – Button Press Selection (Option # 8): To eliminate the possibility of accidentally opening the trunk or starting the vehicle, there are (3) options for button press selection. This option will allow you to change wh...

Page 11 - UNSUCCESSFUL REMOTE START; and 3; time. For hard starting engines, the unit will allow a starter crank; NO FURTHER; TURNING OFF YOUR REMOTE STARTED ENGINE (VIA REMOTE CONTROL):; PRESS START; ENTERING YOUR REMOTE STARTED VEHICLE:; is now controlling your vehicle.

11 REMOTE ENGINE CONTROL UNSUCCESSFUL REMOTE START In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then attempts to restart the engine a 2 nd and 3 rd time. For hard starting engines, the unit will allow a starter crank time of up to13 secon...

Page 12 - INFINITY RUN MODE; This mode allows the vehicle’s engine to remain running; INFINITY RUN MODE – EXITING THE VEHICLE:; button a second time within 10 seconds at STEP #1.

12 REMOTE ENGINE CONTROL IDLE DOWN MODE (TAKE-OVER OPERATION) This mode allows the unit to take over operation of your idling, parked vehicle while the ignition key is removed and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will remain running for ...

Page 13 - TIMED SELF START MODE; confirmation that the unit is in Timed Self-Start Mode.; RESETTING TIMED SELF START MODE

13 REMOTE ENGINE CONTROL TIMED SELF START MODE This mode allows the vehicle to be programmed to self-start every 4 hours and run for the programmed run time. This can be helpful during extremely cold conditions where engine or fluid freeze-up is a concern. !!THE VEHICLE MUST BE OUTDOORS OR IN A WELL...

Page 14 - ANTI CARJACK PROTECTION; REMOTE OPERATED CARJACK PROTECTION

14 ANTI CARJACK PROTECTION REMOTE OPERATED CARJACK PROTECTION This feature provides Active Carjack protection through the remote control. When the Ignition is on (vehicle is running), press and hold the #1 LOCK Button and #3 TRUNK Button for 2 seconds. The parking lights will flash 2 times and the L...

Page 15 - LED DIAGNOSTICS; Shock Sensor = 1 Flash; REMOTE START DIAGNOSTICS; Parking Light Flashes = Manual Transmission Mode Error.

15 LED DIAGNOSTICS The SP-500 system includes disarm diagnostics, through the BLUE LED light, that will help in determining what caused the last trigger of the alarm system. This is a valuable tool in determining how the vehicle was tampered with or if there is a false alarm problem in which case yo...

Page 16 - TRANSCEIVER / REMOTE CONTROL PROGRAMMING; for a 2; for the 3; otherwise turn key off. See diagram below.; WAIT FOR; COMPLETE

16 TRANSCEIVER / REMOTE CONTROL PROGRAMMING Note: All transmitter codes must be learned at time of programming!! The SP-500 learns up to 4 different transmitter codes. 1. Turn key to the ON position. (Pink wire must be connected.) 2. Press Programming button 4 times, then after a few seconds the uni...

Page 17 - VEHICLE OPERATION; TRANSMIT ICON

17 2 VEHICLE OPERATION 2 VEHICLE CONTROL Your remotes have the ability to control a second vehicle with a Crimestopper system installed. To set up the 2-Vehicle operation you must first program your remotes to Vehicle #2. Follow the “Transmitter Programming” steps (Pg. 16) at the second vehicle and ...

Page 18 - OPTIONAL TURBO TIMER MODE; Brake Pedal Set Mode

18 OPTIONAL TURBO TIMER MODE The optional Turbo Timer mode allows the CoolStart system to keep a Turbo or Turbo Diesel vehicle running for 1 to 5 minutes [selectively] after you remove the key and exit the vehicle. This is handy for turbo cool-down without the need for expensive turbo timers. This m...

Page 19 - SETTING THE TURBO TIMER RUN TIME; REMOVE KEY

19 SETTING THE TURBO TIMER RUN TIME REMOVE KEY PRESS TURBO FLASH 1-5X EXIT VEH. PRESS AND HOLD BRAKE TIMER BUTTON 1-5 TIMES RUNNING RELEASE BRAKE LIGHTS RUNNING REMAIN 1-5 MIN. CAUTION!! IF YOU PRESS THE TURBO TIMER BUTTON WHEN ENGINE IS NOT RUNNING IT WILL TRIGGER A REMOTE START! MAKE A NOTE OF THI...

Page 20 - LOW BATTERY; BATTERY REPLACEMENT; LOW BATTERY WARNING; To replace the battery on Sidekick:

20 LOW BATTERY 2 Screws Remove LOW BATTERY BATTERY REPLACEMENT LOW BATTERY WARNING The 2-W ay LCD remote has a low battery warning system. W hen the battery voltage is low, the LCD Pager Remote will show a low voltage icon. We recommend replacing the battery for proper operation. To replace the batt...