Crimestopper RS-1604TW1 - Manuals

Crimestopper RS-1604TW1 – Manual in PDF format online.

Manuals:

Manual

Manual Crimestopper RS-1604TW1

Summary

Page 2 - TABLE OF CONTENTS; AAA; OPERATION CAUTIONS & WARNINGS; VENDORS

2 TABLE OF CONTENTS Operation Cautions & Warnings….………………..….…………………………………….………………… ...………2 2-Way Paging LED Remote TW1.........…………………………………………………………….…………..……….3 2-Way Paging LCD Remote TW2..……………………………………………………………………………...……….4 2-Way Paging LCD Remote FM…..……..……………………………………………………………………...….....

Page 3 - -WAY PAGING LED REMOTE; FEATURE; BUTTON; Press and release to Lock doors.; Press and Release to show the previous status.

3 2-WAY PAGING LED REMOTE RS-1604TW1 TWO-WAY PAGER OPERATION & PAGE TONES: FEATURE BUTTON ACTION BEEPS LED/FLASH LOCK #1 (Lock) Press & Release 1X then 1X again Orange / 1X UNLOCK #2 (Unlock) Press & Release 1X then 2X again Green / 2X AUX #1 #3 (Trunk) Press & Hold 2 Sec. 1X then 3X...

Page 4 - Press and release to Lock doors.; to activate trunk pop (Optional; Hold two seconds; -WAY PAGING LCD REMOTE

4 #2 UNLOCK LCD SCREEN #4 ENGINESTART/STOP #1 LOCK #3 TRUNK #5 RECALL CAR I or II FIXEDANTENNA AM OPERATION: BUTTON 1 (LOCK Symbol): • Press and release to Lock doors. • Press and Hold for more than 3 seconds to activate “Panic” feature. BUTTON 2 (Unlock Symbol): • Press and release to Unlock doors....

Page 5 - LOCK; Press and release to Lock system.

5 2-WAY PAGING LCD REMOTE RS-1804FM/1905FM #1 ARM/ LOCK #4 ENGINE START/STOP # 5 RECALL / CAR I OR II # 3 T R U N K P O P #2 DISARM/ U N L O C K A N T E N N A START FIXED L C D S C R E E N PM P M PM P M P M IGN P M IGN (<<<< MOVING <<<<<) LOCK UnLock Trunk Pop Confirm Remo...

Page 6 - USING THE 1-WAY REMOTE; Press and release to Lock doors.; COOLSTART; Replacement Battery

6 USING THE 1-WAY REMOTE The transmitter supplied with the CoolStart system contains four buttons, flashlight, and vehicle 2 switch. The button configuration of the CoolStart system is Factory-set and unchangeable. See Page 1 6 for additional information on how to use your remote to operate a second...

Page 7 - COOL START; Press and release to Lock doors .

7 USING THE 1-WAY REMOTE RS-1905FM START LOCK UNLOCK REMOTE #4 #3 #2 #1 2ND VEHICLE TRUNK (AUX#3) (AUX#2) (AUX#4) STARTER #5 COOL START The transmitter supplied with the RS-1804FM/1905FM system has five buttons. The button configuration of the RS-1804FM/1905FM is Factory-set and unchangeable. See Pa...

Page 8 - REMOTE ENGINE STARTING; REMOTE ENGINE STARTING - SUCCESSFUL START:; REMOTE ENGINE STARTING - UNSUCCESSFUL START; NO FURTHER ATTEMPTS WILL BE MADE AUTOMATICALLY

8 REMOTE ENGINE STARTING REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press the remote start button for at least 1/2 second (Default) or twice if set for double press. 2) Parking lights flash once; return solid, and the Ignition/Acc circuits turn on. 3) After a few seconds the Starter Motor engages...

Page 9 - REMOTE ENGINE STARTING Cont.; now controlling your vehicle.; REMOTE START; RUN TIME RESET

9 REMOTE ENGINE STARTING Cont. ENTERING YOUR REMOTE STARTED VEHICLE: 1) With engine running, Remote Unlock system (If equipped) or open door with key. 2) Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset). 3) Turn Ignition to ON/RUN position, then press brake pedal to rese...

Page 10 - ENTERING A VEHICLE DURING “IDLE-DOWN” or “INFINITY RUN” MODES:; INDEFINITELY after the programmed run time elapses

10 REMOTE ENGINE STARTING IDLE DOWN MODE - EXITING THE VEHICLE: 1) With vehicle engine running with key, **press the Remote Start button for at least a 1/2 second or twice if set for double press. 2) Parking Lights will turn ON. 3) Doors will unlock, or if brake pedal is being depressed, doors will ...

Page 11 - INFINITY RUN MODE – EXITING THE VEHICLE:; THE; SELECTABLE HOURLY COLD-START MODE – EXITING THE VEHICLE:; on signaling the remote start has turned on and doors will unlock.

11 REMOTE ENGINE STARTING INFINITY RUN MODE – EXITING THE VEHICLE: 1) With vehicle engine running with the key, **press the Remote Start button for at least 1/2 second, pause a few seconds, then press and release the remote start button a second time. 2) Parking Lights will start flashing, and doors...

Page 12 - should remain running for the selected number of minutes.

12 TURBO TIMER MODE (OPTIONAL) The optional Turbo Timer mode allows the CoolStart system to keep a Turbo or Turbo Diesel vehicle running for 1 to 5 minutes [selectively] after you remove the key, exit t he vehicle, and lock the doors remotely. This is handy for turbo cool-down without the need for e...

Page 13 - CONVENIENCE AND SAFETY FEATURES; REMOTE TRUNK RELEASE OR DOMELIGHT ILLUMINATION (Optional)

13 CONVENIENCE AND SAFETY FEATURES KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional) This system enables you to remotely lock and unlock the vehicle’s doors (if equipped with power locks) via remote control for safety and convenience. Note: This feature may require extra labor and/or parts to instal...

Page 14 - VALET MODE / STARTER DISABLE OVERRIDE

14 CONVENIENCE AND SAFETY FEATURES VALET MODE / STARTER DISABLE OVERRIDE Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into valet mode. The remote start function WILL NOT operate when in Valet mode. To enter Valet mode, turn the key to the ON positio...

Page 15 - TRANSMITTER PROGRAMMING; waiting for a 2; waiting for the 3; otherwise turn key off and close hood. See diagram below.; WAIT FOR; PRESS TOGETHER

15 TRANSMITTER PROGRAMMING Note: All transmitter codes must be learned at time of programming!! The unit will learns up to 4 different transmitter codes. 1. Open Hood (If no hood pin installed with your system, then you must ground the Gray Hood pin wire). 2. Turn key to the ON position. 3. Press Pr...

Page 16 - Press side button; WAY SIDEKICK REMOTE; However, both systems must be the same; Vehicle Programming and Operation instruction):; VEHICLE 2

16 COOLSTART VEHICLE #2 Press side button first, then you have 3 seconds to control vehicle #2. 1 WAY SIDEKICK REMOTE 2-VEHICLE OPERATION A single remote can control two different vehicles CoolStart systems installed. However, both systems must be the same type. RS-1604TW1/1704TW2 is not compatible ...

Page 17 - TROUBLESHOOTING: “BEFORE YOU CALL” SECTION; UNIT FLASHES LIGHTS ONCE AND WILL NOT ATTEMPT A START:

17 2-VEHICLE OPERATION Cont. L.E.D Two -way Remote In step #4 of transmitter programming (see Page 15), press and hold the side button on the LED remote for 5 seconds. The unit will beep 2 times and a yellow LED will flash (now you are in 2 nd vehicle operation mode). Press the lock and unlock butto...

Page 18 - TROUBLESHOOTING cont.; The remote start unit will make up to 3 attempts to start the engine.

18 TROUBLESHOOTING cont. NO RESPONSE FROM REMOTE TRANSMITTERS: (4 Parts) 1. Check for proper power/ground wiring connections a t module. 2. Check Antenna Module connection. The antenna module included with this system must be plugged in. 3. Transmitters may need to be programmed to the unit. See tra...

Page 19 - LOW BATTERY WARNING -; When the battery is low the orange and green LED flash 6; REPLACING THE BATTERY; Pager will beep 3 times when new battery is inserted corre ctly.

19 LOW BATTERY WARNING LOW BATTERY WARNING - LCD REMOTE (RS-1604TW1/RS-1704TW2) RS-1604TW1 (LED system): When the battery is low the orange and green LED flash 6 times with any button pressed. RS-1704TW2/RS-1804FM/1905FM (LCD SYSTEM): When the battery is low, a low battery icon turns on. We recommen...