Crimestopper RS-1405DP - Manuals

Page 2 - TABLE OF CONTENTS; OPERATION CAUTIONS & WARNINGS; VENDORS

2 TABLE OF CONTENTS Operation Cautions & Warnings….………………..….…………………………………….……………….….………2 Remote Operation………………………………………………………………………………………………..…....….3 Remote Engine Starting ,Idle Down Mode, Infinity Run Mode, ………………………………………….…....…..4-7 Turbo Timer Mode……………………………….……………………………………...……………………....

Page 3 - REMOTE OPERATION; Replacement Battery

3 REMOTE OPERATION START LOCK UNLOCK REMOTE #4 #3 #2 #1 2ND VEHICLE TRUNK (AUX#3) (AUX#2) (AUX#4) STARTER #5 COOL START (2ND FUNCTION) The transmitter supplied with the RS-1405DP/1505DP system has five buttons. The button configuration of the RS-1405DP/1505DP is Factory-set and unchangeable. See Pag...

Page 4 - REMOTE ENGINE STARTING; REMOTE ENGINE STARTING - SUCCESSFUL START:; IGN; REMOTE ENGINE STARTING - UNSUCCESSFUL START; and 3; time. For hard starting engines, the unit will allow a starter; NO FURTHER ATTEMPTS WILL BE MADE AUTOMATICALLY

4 REMOTE ENGINE STARTING REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press the remote start button for at least 1/2 second (Default) or twice if set for double press. 2) Parking lights flash once; return solid, and the Ignition/Acc circuits turn on. 3) After a few seconds the Starter Motor engages...

Page 5 - REMOTE ENGINE STARTING Cont.; is now controlling your vehicle.; REMOTE START; RUN TIME RESET

5 REMOTE ENGINE STARTING Cont. ENTERING YOUR REMOTE STARTED VEHICLE: 1) With engine running, Remote Unlock system (If equipped) or open door with key. 2) Enter vehicle and be careful not to step on brake pedal! (Remote Start Reset). 3) Turn Ignition to ON/RUN position, then press brake pedal to rese...

Page 6 - set for double press.; ENTERING A VEHICLE DURING “IDLE-DOWN” or “INFINITY RUN” MODES:; INDEFINITELY after the programmed run time elapses

6 REMOTE ENGINE STARTING Cont. (IDLE DOWN MODE) IDLE DOWN MODE - EXITING THE VEHICLE: 1) With vehicle engine running with key, **press the Remote Start button for at least a 1/2 second or twice if set for double press. 2) Parking Lights will turn ON. 3) Doors will unlock, or if brake pedal is being ...

Page 7 - INFINITY RUN MODE – EXITING THE VEHICLE:; THE VEHICLE MUST BE OUTDOORS OR IN A WELL VENILATED AREA!; SELECTABLE HOURLY COLD-START MODE – EXITING THE VEHICLE:

7 REMOTE ENGINE STARTING Cont. (Infinity Run Mode) INFINITY RUN MODE – EXITING THE VEHICLE: 1) With vehicle engine running with the key, **press the Remote Start button for at least 1/2 second, pause a few seconds, then press and release the remote start button a second time. 2) Parking Lights will ...

Page 9 - CONVENIENCE AND SAFETY FEATURES; time within 3-7 seconds or single press lock/unlock will provide a; REMOTE TRUNK RELEASE OR DOMELIGHT ILLUMINATION (Optional)

9 CONVENIENCE AND SAFETY FEATURES KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional) This system enables you to remotely lock and unlock the vehicle’s doors (if equipped with power locks) via remote control for safety and convenience. Note: This feature may require extra labor and/or parts to install...

Page 10 - VALET MODE / STARTER DISABLE OVERRIDE

10 CONVENIENCE AND SAFETY FEATURES VALET MODE / STARTER DISABLE OVERRIDE Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into valet mode. The remote start function W ILL NOT operate when in Valet mode. To enter Valet mode, turn the key to the ON positi...

Page 11 - TRANSMITTER PROGRAMMING; for a 2; waiting for the 3; mode, otherwise turn key off and close hood. See diagram below.; WAIT FOR

11 TRANSMITTER PROGRAMMING Note: All transmitter codes must be learned at time of programming!! The unit will learns up to 4 different transmitter codes. 1. Open Hood (If no hood pin installed with your system, then you must ground the Blue Hood pin wire). 2. Turn key to the ON position. 3. Press Pr...

Page 12 - However, both systems must be the; You must first Programming your remote for 2; Vehicle Programming and Operation instruction):; TROUBLESHOOTING: “BEFORE YOU CALL” SECTION; UNIT FLASHES LIGHTS ONCE AND WILL NOT ATTEMPT A START:

12 2-VEHICLE OPERATION A single remote can control two different vehicles CoolStart systems installed. However, both systems must be the same type. RS-1405DP/1505DP are only compatible with each other. Programming: You must first Programming your remote for 2 nd vehicle operation: (2 nd Vehicle Prog...

Page 13 - TROUBLESHOOTING cont.

13 TROUBLESHOOTING cont. NO RESPONSE FROM REMOTE TRANSMITTERS: (4 Parts) 1. Check for proper power/ground wiring connections at module. 2. Check Antenna Module connection. The antenna module included with this system must be plugged in. 3. Transmitters may need to be programmed to the unit. See tran...

Page 14 - BATTERY REPLACEMENT; To replace the battery:

BATTERY REPLACEMENT To replace the battery: Simply remove the screws on back of the transmitter and open the case. Remove the battery and replace. The replacement battery for all transmitters is GP23A. www.crimestopper.com [email protected] © 2005 Crimestopper Security Products ONLINE TECHNICAL...