Crimestopper EZ-31DP - Manuals

Page 2 - VENDORS

2 TABLE OF CONTENTS Operation Cautions & Warnings…….……………..….…………………………………….…………………………2 Using the Remote Transmitter…………………………………………………………………………………...…….3 Status LED……………………………………………………………………………………………………………….4 Remote Engine Control…………….…..…………………………………………………………………….……….3-8 Turbo Timer Mode……………...

Page 3 - USING THE REMOTE TRANSMITTER

3 USING THE REMOTE TRANSMITTER EZ START #1 REMOTE VEHICLE 2 FLASHLIGHT START EZ START #1 #2 #3 LOCK REMOTE UNLOCK VEHICLE 2 FLASHLIGHT START EZ START #3 #1 #2 #4 LOCK TRUNK REMOTE UNLOCK VEHICLE 2 FLASHLIGHT START EZ-34DP II EZ-33DP II EZ-31DP II For EZ-30DP II The EZ-30DP II model does not include ...

Page 4 - STATUS LED; REMOTE ENGINE CONTROL; REMOTE ENGINE STARTING - SUCCESSFUL START:; IGN; REMOTE ENGINE STARTING - UNSUCCESSFUL START; NO FURTHER

4 STATUS LED LED Operation: (install option) LED will flash when remotely locking your doors. LED will remain solid in Valet Service mode. REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press the remote start button for at least 1/2 second (*default). (For EZ-30DP II models, con...

Page 5 - TURNING OFF A REMOTE STARTED ENGINE:; now controlling your vehicle.

5 REMOTE ENGINE CONTROL TURNING OFF A REMOTE STARTED ENGINE: 1) Engine is running in Remote Start (Parking lights ON). 2) Press and release the remote start button or double press (If option #6 is on). (For EZ-30DP II model, activate Green Start input wire.) 3) Engine & parking lights OFF, Doors...

Page 6 - SOLID; OFF; UNLOCK

6 REMOTE ENGINE CONTROL IDLE DOWN MODE - EXITING THE VEHICLE: 1) W ith vehicle engine running with key, press the Remote Start button for at least one second or twice if set for Double press (For EZ-30DP II model activate Green remote start input wire.) 2) Parking Lights will turn ON. 3) Doors will ...

Page 7 - INDEFINITELY after the programmed run time elapses; INFINITY RUN MODE – EXITING THE VEHICLE:; THE

7 REMOTE ENGINE CONTROL INFINITY RUN MODE (NOT AVAILABLE ON EZ-30DP II MODEL) This mode can only be activated when "Idle Down" procedure. The Infinity Run mode allows the vehicle engine to remain running INDEFINITELY after the programmed run time elapses . This mode will allow the vehicle to...

Page 8 - SELECTABLE HOURLY COLD-START MODE – EXITING THE VEHICLE:

8 REMOTE ENGINE CONTROL SELECTABLE HOURLY COLD-START MODE – EXITING THE VEHICLE: 1) Engine should be running with the Key. Press the Remote Start button for at least 1 second. (For EZ-30DP II model, activate Green start input wire.) Lights will turn on signaling the remote start has turned on and do...

Page 9 - should remain running for the selected number of minutes.

9 TURBO TIMER MODE (OPTIONAL) The optional Turbo Timer mode allows the EZ Start system to keep a Turbo or Turbo Diesel vehicle running for 1 to 5 minutes [selectively] after you remove the key, exit the vehicle, and lock the doors remotely. This is handy for turbo cool-down without the need for expe...

Page 10 - CONVENIENCE AND SAFETY FEATURES

10 CONVENIENCE AND SAFETY FEATURES KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional) This system enables you to remotely lock and unlock the vehicle’s doors (if equipped with power locks) via remote control for safety and convenience. Note: This feature may require extra labor and/or parts to instal...

Page 11 - VALET MODE / STARTER DISABLE OVERRIDE

11 CONVENIENCE AND SAFETY FEATURES VALET MODE / STARTER DISABLE OVERRIDE Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into valet mode. The remote start function W ILL NOT operate when in Valet mode. To enter Valet mode, turn the key to the ON positi...

Page 12 - TRANSMITTER PROGRAMMING

12 TRANSMITTER PROGRAMMING Note: All transmitter codes must be learned at time of programming!! The EZ-34 learns up to 4 different transmitter codes. 1. Turn key to the ON position. (Pink wire must be connected.) 2. Press Programming button 4 times, then after a few seconds the unit flashes the park...

Page 13 - Press side button

13 EZ START VEHICLE #2 Press side button first, then you have 4 seconds to control vehicle #2. 2-VEHICLE OPERATION & PROGRAMMING A single EZ-30 SERIES II remote can control two different vehicles with EZ-30 SERIES II systems installed. SETUP: Follow the “Transmitter Programming” steps on the sec...

Page 14 - TROUBLESHOOTING: “BEFORE YOU CALL” SECTION; UNIT FLASHES LIGHTS ONCE AND WILL NOT ATTEMPT A START:

14 TROUBLESHOOTING: “BEFORE YOU CALL” SECTION UNIT WILL NOT ATTEMPT A START (KEYLESS ENTRY STILL FUNCTIONS NORMALLY): The unit is in Valet mode. Turn Ignition ON, press and hold valet/programming button for 6 seconds then turn key off. Unit is now out of valet mode and should perform a remote start....

Page 15 - run properly. The EZ; BATTERY REPLACEMENT; To replace the battery:

15 TROUBLESHOOTING: “BEFORE YOU CALL” SECTION VEHICLE STARTS BUT “CHECK ENGINE” LIGHT COMES ON OR ENGINE RUNS BADLY: (2 parts) 1. Many 1995-UP General Motors cars/trucks require a secondary ignition circuit for the Transmission computer and other on board systems. If the vehicle is started without t...

Page 16 - REMOTE START DIAGNOSTICS

16 REMOTE START DIAGNOSTICS If the system flashes the parking lights one to three times and doesn’t attempt remote, it means the following: 1 Parking Light Flash = Problem with Brake Switch. 2 Parking Light Flashes = Problem with Hood Switch. 3 Parking Light Flashes = Valet Service Mode. www.crimest...