Crimestopper EZ-1 - Manuals

Page 2 - VENDORS

2 TABLE OF CONTENTS Operation Cautions & Warnings…….……………..….…………………………………….…………….….…………2 Using the Remote Transmitter………………………………………………………………………….………....…….3 Status LED……………………………………………………………………………………………….……….……….4 Remote Engine Control…………….…..……………………………………………………………….…….……….4-7 Turbo Timer Mo...

Page 3 - USING THE REMOTE TRANSMITTER; START BUTTON

3 USING THE REMOTE TRANSMITTER START BUTTON LED REMOTE START BUTTON PRESS SELECTION (Option # 6): The transmitter supplied with this system is a single button remote control. To eliminate the possibility of accidentally starting the vehicle, there are (3) options for button press selection. This opt...

Page 4 - REMOTE ENGINE STARTING - SUCCESSFUL START:; IGN

4 STATUS LED VEHICLE STATUS LED : (Install optional) The optional LED will remain solid when the system is in Valet Service mode. The remote start function W ILL NOT operate when in Valet Mode. See page # 11. REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - SUCCESSFUL START: 1) Press the remote start ...

Page 5 - REMOTE ENGINE CONTROL; NO FURTHER; TURNING OFF A REMOTE STARTED ENGINE:; now controlling your vehicle.

5 REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - UNSUCCESSFUL START In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then attempts to restart the engine a 2 nd and 3 rd time. For hard starting engines, the unit will allow a starter crank time...

Page 7 - INFINITY RUN MODE; INDEFINITELY after the programmed run time elapses

7 REMOTE ENGINE CONTROL INFINITY RUN MODE This mode can only be activated with "Idle Down" procedure. The Infinity Run mode allows the vehicle engine to remain running INDEFINITELY after the programmed run time elapses . This mode will allow the vehicle to be left running and unattended with...

Page 9 - SETTING THE TURBO TIMER RUN TIME; REMOVE KEY

9 SETTING THE TURBO TIMER RUN TIME REMOVE KEY PRESS TURBO FLASH 1-5X EXIT VEH. PRESS AND HOLD BRAKE TIMER BUTTON 1-5 TIMES RUNNING RELEASE BRAKE LIGHTS RUNNING REMAIN 1-5 MIN.

Page 10 - CONVENIENCE AND SAFETY FEATURES

10 CONVENIENCE AND SAFETY FEATURES KEYLESS ENTRY (POWER DOOR LOCK CONTROL, Optional) This system enables you to remotely lock and unlock the vehicle’s doors (if equipped with power locks) via remote control for safety and convenience. Note: This feature may require extra labor and/or parts to instal...

Page 11 - VALET MODE (Requires Installation of Valet Switch)

11 CONVENIENCE AND SAFETY FEATURES VALET MODE (Requires Installation of Valet Switch) Before servicing your vehicle or handing the keys over to a Valet we recommend putting the unit into Valet Mode. The remote start function W ILL NOT operate when in Valet Mode. To enter Valet mode, turn the key to ...

Page 12 - TRANSMITTER PROGRAMMING

12 TRANSMITTER PROGRAMMING Note: All transmitter codes must be learned at time of programming!! The RS-1 learns up to 4 different transmitter codes. 1. Turn key to the ON position. (Pink wire must be connected.) 2. Press Programming button 4 times, then after a few seconds the unit flashes the parki...

Page 14 - BATTERY REPLACEMENT; To replace the battery:; Back Cover

14 BATTERY REPLACEMENT To replace the battery: Simply remove the screw on back of the transmitter and slide the case apart as shown. Remove the two CR-2016 Lithium batteries and replace. Slide case back together and tighten screw. LITHIUMCR 2016 Back Cover Screw Slide apart