Crimestopper DVR - Manuals - manualsarea.com

Page 2 - Contents; Remote Controller x 1; Installation; Power Connector

1. Contents 1. Car DVR Box x 1 2. 1 GB SD Card 3. IR cable x 1 4. Remote Controller x 1 5. Power Cable x 1 6. English User Manual x 1 2. Installation Input/Output Ports Front View Back View Video Input 4 Reverse CCD Video Input 3 Inside CCD Video Input 2 Turn Signal CCD Video Input 1 Front CCD Power...

Page 3 - Pow er Port Description; Remote Controller Key Function; Item; tu

Pow er Port Description Power Connect Description 1. YELLOW ---------------TO BATTERY IN. 2. RED ---------------------TO ACC IN. 3. BROWN ----------------TO DOOR TRIGGER (–). 4. BROWN/WHITE------TO DOOR TRIGGER (+). 5. GREEN -----------------TO HANDBRAKE. 6. BLUE --------------------DC 12V OUT (200m...

Page 4 - Menu Structure

Menu Structure MENU Set Clock SD Card Format Boot Up Indoor Record Interval Adjust time/date. Format: hh:mm:ss, mm/dd/yy NTSC/PAL two systems CCD video input selection. Even user selection not correct, DVR still can get the video. Recording intervals of DVR after Ignition ON. If user selects “0 seco...

Page 5 - DVR Operation Algorithm; Boot Up Indoor Record Interval: Default = 0 seconds; Boot Up

DVR Operation Algorithm (1) ACC On Before Door Open: Boot Up Indoor Record Interval: Default = 0 seconds Choices = 0 seconds / 10 seconds / 20 seconds / 30 seconds / OFF (No Dome Trigger) Force to record indoor CCD (V3) for user specify time interval and then switch to front CCD (V1). Every 5 minute...

Page 6 - DVR Specification; System Icon Description

DVR Specification (1) Power: Input voltage support 9-36V DC, pow er consumption 2.7W(12V ) ， standby current is 10mA. (2) DC 12V output: We support one DC 12Volt/200mA output to dedicate to connect indoor CCD (V3) power. DVR Box can control the V3 camera power on when dome open at ignition off. Othe...

Page 7 - Set Clock; OK; TV Output System

4. MENU OPERATION Press MENU key to enter System setup. Setup the correct values according to your requirements. After setup is finished ， press EXIT key to memorize and Exit Menu. If EXIT key is not pressed to leave ， the DVR will not memorize the value which user changed 。 Set Clock Under Set Cloc...

Page 8 - Video Input System; SD Card Format

Video Input System Please setup correct f ormat according to their CCD camera TV system . Even with setup not correct, box still can get the video in, but image quality maybe not good. Default value of this item is “ NTSC ” . SD Card Format User can use this function to format SD card to our box nee...

Page 9 - Boot Up Indoor Record Interval; Ignition Off Dome Open Record Interval

Boot Up Indoor Record Interval The DVR will record the Indoor camera (V3) for time interval of this value after Ignition on (ACC ON). If user selects “0 seconds”, the DVR will bypass Boot Up Indoor Record (record V1 immediately after ignition on). If you select “OFF”, that means box will bypass all ...

Page 10 - Play Back Selection; Playback Status

Play Back Selection In this selection, you can playback video files directly from the DVR without removing the SD card. You need to select which area to playback. After selecting the area which you want, the DVR will create the file list which in this area. Box will use the file’s name and record st...