Crimestopper CS-855RKE - Manuals

Page 2 - INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING; COMPONENT MOUNTING; Driver’s Side usually; WIRING; YELLOW WIRE: IGNITION SWITCHED “ON” AND “START” +12 VOLTS

INSTALLATION CAUTIONS & WARNINGS BEFORE BEGINNING , check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS BRAKES, AND BATTERY). DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED with brake, and gas pedals, steering column, or any other moving parts in t...

Page 3 - SIDE VIEW; POSITIVE DOME; ORANGE WIRE: NEGATIVE ARMED OUTPUT; Connects to Dome light activation; OUTPUT

JUMPER PLUG SIDE VIEW JUMPER PINS *NEGATIVE DOME CS855RKE MODULE POSITIVE DOME *DEFAULT SETTING IS NEGATIVE NOTE: DOES NOT APPLY TO CS-845RKE WIRING GRAY WIRE: (-) AUXILIARY REMOTE OUTPUT 1 (Optional, requires relay) Connect to terminal 85 of relay. Connect terminal 86 to constant. Connect terminal ...

Page 4 - CS-845 RKE POWER DOOR LOCK WIRING

CS-845 RKE POWER DOOR LOCK WIRING 3 PIN (WHITE): DOOR LOCK OUTPUT PLUG GREEN: (-) Negative LOCK pulse RED: +12V Coil Power for external relays (Term. 86). BLUE: (-) Negative UNLOCK pulse CS-845RKE NEGATIVE TRIGGER DOORLOCK WIRING CS-845RKE POSITIVE TRIGGER DOORLOCK WIRING GREEN GREEN FUSED RED +12V ...

Page 5 - CS-855 RKE POWER DOOR LOCK WIRING; *Diodes are recommended to prevent shorting door lock outputs.

CS-855 RKE POWER DOOR LOCK WIRING 3 PIN (WHITE): DOOR LOCK OUTPUT PLUG GREEN: (-) Negative LOCK pulse / (+) Positive UNLOCK pulse RED: +12V Coil Power for external relays (Term. 86). BLUE: (-) Negative UNLOCK pulse / (+) Positive LOCK pulse CS-855 RKE NEGATIVE TRIGGER DOORLOCK WIRING CS-855 RKE POSI...

Page 6 - CS-845/855 SEPARATE DRIVER’S DOOR UNLOCK DIAGRAMS; REVERSE POLARITY DOOR LOCKS

CS-845/855 SEPARATE DRIVER’S DOOR UNLOCK DIAGRAMS REVERSE POLARITY DOOR LOCKS VIOLET GREEN FUSED RED +12V BLUE + DRIVER'S 86 85 86 85 DOOR MOTOR 86 85 87 87 87 30 87A 30 87A 30 87A + + L L CUT UL UL CUT CUT UNLOCK WIRE NEGATIVE TRIGGER DOOR LOCKS VIOLET GREEN RED BLUE DRIVER'SDOOR MOTOR 86 85 L L 87...

Page 7 - TRANSMITTER PROGRAMMING; Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3; once and one horn chirp.

TRANSMITTER PROGRAMMING 1. Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3 rd time. (ON/OFF, ON/OFF, ON) Lights should flash once and one horn chirp. 2. Push the Program/Override Button for 5 seconds until you hear 3 horn chirps and lights flash 3 times. Release the Button. 3. Press th...

Page 8 - OPTION PROGRAMMING; PROGRAMMING OPTIONS CHART; DOUBLE UNLOCK PULSE; This option turns the horn chirps for lock/unlock on or off.

OPTION PROGRAMMING To change programmable options: 1. Turn the Ignition ON, wait one second, and press the Override/Program button 5 times. 2. The system should flash the parking lights 8 times in quick succession. 3. W ithin the next few seconds, press the Override/Program button [again] the number...

Page 9 - OPTION PROGRAMMING cont.; OPTION RESET PROCEDURE:; OPERATION; REMOTE LOCK

#3 #1 #2 #4 PANIC TRUNK PANIC LOCK UNLOCK REMOTE POP OPTION PROGRAMMING cont. 6. IGNITION TRIGGER This option controls the unit’s optional Ignition trigger feature. If selected to ON, then the vehicle’s horn will honk if a n unauthorized operator turns on the Ignition after the vehicle had been lock...

Page 10 - using the remote; VALET MODE; ADDITIONAL INSTALLATION ACCESSORIES

OPERATION IGNITION TRIGGER (OPTIONAL) This optional feature allows the unit to activate the panic mode if an unauthorized operator turns on the Ignition after the vehicle had been locked using the remote . This is similar to an alarm feature. To avoid an Ignition trigger, use the remote for BOTH LOC...