Crimestopper CS-2100 - Manuals

Crimestopper CS-2100 – Manual in PDF format online.

Manuals:

Manual Crimestopper CS-2100

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9

Summary

Page 2 - COMPONENT MOUNTING; DO NOT; Mount the red; LED; in a visible location on the dashboard or console.; WIRING

COMPONENT MOUNTING DO NOT mount the control unit in the engine compartment. DO NOT Mount the control unit or wiring harness where they can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column. The alarm control module should be mounted in a concealed location. T...

Page 3 - YELLOW WIRE: IGNITION SWITCHED “ON” AND “START” +12 VOLTS; Connect to RED siren wire.

WIRING VIOLET WIRE: (+) DOOR TRIGGER INPUT Same as GREEN wire [below] except this wire is used for vehicles that show a positive voltage (12 volts) when the door is open such as many Ford, Lincoln, Mercury vehicles. BLUE WIRE: (-) HOOD/TRUNK INPUT This wire is an input trigger for a grounding hood o...

Page 4 - WIRING / PROGRAMMING; SENSOR GROUND; SILENT ARMING /DISARMING; The system is now in programming mode.; OPTION PROGRAMMING; PROGRAMMABLE OPTIONS

WIRING / PROGRAMMING 4 PIN SENSOR PLUG: WHITE WIRE: NEG. WARN AWAY * The Sensor supplied with the system does not req uire BLUE WIRE: NEG. TRIGGER any additional wiring, simply mount the sensor in a BLACK WIRE: SENSOR GROUND suitable location, plug in, and adjust sensitivity. RED WIRE: SENSOR +12V P...

Crimestopper Manuals