Crimestopper CS-2014TW2 - Manuals

Crimestopper CS-2014TW2 – Manual in PDF format online.

Manuals:

Manual

Manual Crimestopper CS-2014TW2

Summary

Page 2 - TABLE OF CONTENTS; OPERATION CAUTIONS & WARNINGS; and its

TABLE OF CONTENTS Operation Cautions & Warnings……..…………..……………………………………………………………………2 Transceiver / Pager-Remote……….....…………..……………………………………………………………………3 CS-416TW Sidekick Remote Control…………………….…………………………………………………..…...…..4 Operating Instructions - Alarm……………………………………………………….………..……………..……..5-8 ...

Page 3 - BUTTON 5; Press and release to light up; Press and Hold for more than 3 seconds to activate “Panic” feature.

#2 DISARM UNLOCK LCD SCREEN #4 ENGINE START/STOP #1 ARM LOCK #3 TRUNK #5 RECALL CAR I or II FIXED ANTENNA AM BUTTON 5 (On side of remote): • Press and release to light up the LCD screen. • Press and release twice to recall the last message from the LCD screen. • Press and Hold two seconds to change ...

Page 4 - CrimeStopper; CS-416TW SIDEKICK REMOTE

CrimeStopper #3 #1 #2 #4 LOCK/ TRUNK REMOTE UNLOCK/ VEHICLE 2 FLASHLIGHT START #5 #6 ARM DISARM CS-416TW SIDEKICK REMOTE The CS-416TW 1 -Way sidekick remote adds flexibility to your CS-2014TW2. You can have the convenience of operating your system without needing to carry the larger pager remote. Th...

Page 5 - OPERATING INSTRUCTIONS - ALARM; beeps to notify; you the vehicle has been tampered with.; SHOCK SENSOR

ARM -LOCK OPERATING INSTRUCTIONS - ALARM Active Arming / Locking: Press button #1 (Lock symbol) on the transceiver. The System will arm emit one siren chirp, one light flash, and the LED will begin to flash. Power locks will lock (if equipped). Starter disable circuit will turn on. LCD Pager will be...

Page 7 - TRUNK POP; Pre-Warning Shock Protection

PRE-WARN TRUNK POP OPERATING INSTRUCTIONS - ALARM Pre-Warning Shock Protection The Pre -warning (warn-away) feature will activate when a low-level shock or vibration detected by the system’s shock sensor. The alarm will chirp the siren 5 times and flash the lights once to help deter any further tamp...

Page 8 - Valet Mode (Enter manually or using the remote)

VALET MODE VALET PARK OPERATING INSTRUCTIONS - ALARM Emergency Override (Disarm) If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to disarm the system manually. Open the door with the key [alarm will sound], turn the ignition on, and press the...

Page 9 - REMOTE ENGINE CONTROL; be turned off with remote transmitter.; REMOTE ENGINE STARTING – LCD PAGER-REMOTE:; IGN; REMOTE START

REMOTE ENGINE CONTROL REMOTE ENGINE STARTING - SUCCESSFUL START 1) Press remote start button on the remote transmitter. System will chirp 3 times for audible confirmation. (Chirps can be programmed on or off -See installation manual.) 2) Parking lights flash once, then turn on solid, Ignition/Access...

Page 10 - UNSUCCESSFUL REMOTE START; time. For hard starting engines, the unit will allow a starter crank; NO FURTHER; TURNING OFF YOUR REMOTE STARTED ENGINE (VIA REMOTE CONTROL):; ENTERING YOUR REMOTE STARTED VEHICLE:; is now controlling your vehicle.

REMOTE ENGINE CONTROL UNSUCCESSFUL REMOTE START In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, then attempts to restart the engine a 2 nd and 3 rd time. For hard starting engines, the unit will allow a starter crank time of up to13 seconds ...

Page 11 - INFINITY RUN MODE; This mode allows the vehicle’s engine to remain running; INFINITY RUN MODE – EXITING THE VEHICLE:; button a second time within 10 seconds at STEP #1.

REMOTE ENGINE CONTROL IDLE DOWN MODE (TAKE-OVER OPERATION) This mode allows the unit to take over operation of your idling, parked vehicle while the ignition key is removed and you exit the vehicle. The vehicle is put into a remote running condition before you exit and it will remain running for the...

Page 12 - TIMED SELF START MODE; confirmation that the unit is in Timed Self -Start Mode.; RESETTING TIMED SELF START MODE

REMOTE ENGINE CONTROL TIMED SELF START MODE This mode allows the vehicle to be programmed to self-start every 4 hours and run for the programmed run time. This can be helpful during extremely cold conditions where engine or fluid freeze -up is a concern. !!THE VEHICLE MUST BE OUTDOORS OR IN A WELL V...

Page 13 - ANTI CARJACK PROTECTION; REMOTE OPERATED CARJACK PROTECTION

ANTI CARJACK PROTECTION REMOTE OPERATED CARJACK PROTECTION This feature provides Active Carjack protection through the remote control. When the Ignition is on (vehicle is running), press and hold the #1 LOCK Button and #3 TRUNK Button for 2 seconds. The parking lights will flash 2 times and the LED ...

Page 14 - LED DIAGNOSTICS; Shock Sensor = 1 Flash; TRANSCEIVER / REMOTE CONTROL PROGRAMMING; should get 2 light flashes indication the unit is waiting for a 2; code and lights will flash; SEE DIAGRAM ON NEXT PAGE

LED DIAGNOSTICS The CS-2014FM system includes disarm diagnostics, through the RED LED light, that will help in determining what caused the last trigger of the alarm system. This is a valuable tool in determining how the vehicle was tampered with or if there is a false alarm problem in which case you...

Page 15 - WAIT FOR; PRESS TOGETHER

TRANSCEIVER / REMOTE CONTROL PROGRAMMING IGN OFF WAIT FOR 4 FLASHES PRESS 4X's FLASH 2, 3, or 4 X's (BLUE WIRE GROUNDED) 2-WAY SYSTEMS & IGN OFF PRESS TOGETHER LOCK & UNLOCK "SideKick" REMOTES COMPLETE 15

Page 16 - VEHICLE OPERATION

CrimeStopper Press & release side button, then you have 4 seconds to control vehicle #2. Press & hold side button for 2 seconds. The remote will beep and "2" icon will appear on LCD screen. "Sidekick" VEHICLE #2 CONTROL: Remote FIXEDANTENNA LED Flashes 2 VEHICLE OPERATION 2 V...

Page 17 - TROUBLESHOOTING FAQ’s: “BEFORE YOU CALL SECTION”; MY IN -DASH LED FLICKERS WHEN PRESSING REMOTE CONTROL BUTTONS:

TROUBLESHOOTING FAQ’s: “BEFORE YOU CALL SECTION” Before calling your dealer or Crimestopper, read the following section for tips that may remedy or explain your problem. RANGE QUESTIONS (2 -Way Pager/Remote): Your CS-2014FM system uses FM High-Frequency signals to send/receive data between the pager...

Page 18 - TROUBLESHOOTING continued; Way FM Transceiver programming” for more information.

TROUBLESHOOTING continued SYSTEM IS NOT SUCCESSFUL AT REMOTE STARTING DURING EXTREME COLD CONDITIONS: Please be aware that during sub-freezing conditions your remote starter may take more that one attempt to start, or it may not successfully start the vehicle after 3 attempts. During these condition...

Page 19 - LOW BATTERY; LOW BATTERY WARNING - LCD REMOTE; To replace the battery:; simply unlatch and slide open the battery door on

LOW BATTERY LOW BATTERY WARNING - LCD REMOTE Your 2-Way pager remote will warn you when the battery gets low. You will see a battery icon on the LCD screen when it is time to replace the AAA battery. To replace the battery: simply unlatch and slide open the battery door on the back of the 2-Way LCD ...