Chicago Electric SKU 45802 - Manuals

Page 2 - Read all instructions before using this product!

SKU 45802 Page 2 Specifications Save This Manual You will need the manual for the safety warnings and precautions, assemblyinstructions, operating and maintenance procedures, parts list and diagram. Keepyour invoice with this manual. Write the invoice number on the inside of the frontcover. Keep the...

Page 3 - Page 3; Maintenance. For your safety, service and maintenance should be; performed regularly by a qualified technician.

SKU 45802 Page 3 7. Maintain product with care. Follow maintenance instructions specified in this manual. 8. Replacement parts and accessories. When servicing, be sure to use only identical replacement parts. Use of any other parts will void the warranty.Only use accessories intended for use with th...

Page 4 - Page 4; General Safety Rules; combustible fumes or dust.

SKU 45802 Page 4 19. Servicing of a double-insulated appliance. In a double-insulated product, two systems of insulation are provided instead of grounding. No groundingmeans is provided on a double-insulated product, nor should a means forgrounding be added to the product. Servicing a double-insulat...

Page 5 - Unpacking

SKU 45802 Page 5 6. Units with broken or missing par ts, or without protective housing or covers should never be used. 7. The high pressure stream of water that this equipment produces can pierce the skin and its underlying tissues, leading to serious injury and possibleamputation. 8. For household ...

Page 7 - Page 7; To Attach Accessories:; Check the GFCI Plug and Cord; Warning: Test the GFCI Plug before each use. Plug the GFCI plug into a; Attach the Lance to the Spray Gun.

SKU 45802 Page 7 To Attach Accessories: 1. Before using the Washer, fit the Wand [A.2] and Lance [A.3] to the Gun [A.1]: Insert the shaped tip of the Wand into the hole of the Gun, paying attentionto join the notch. Press the Wand lightly towards the Gun, and rotate it in thedirection of the arrows,...

Page 8 - Using Foaming Lance: Attach Foaming Lance to the Gun as shown in

SKU 45802 Page 8 8. Press the Gun Trigger [B.7] so the air and any extra pressure are expelled from the piping. 9. Connect the Plug to the Socket [B.8]. 10. Start the equipment by turning the O/I Switch into the “I” position. Warning: Risk of Injection: Unit will star t spraying when trigger is sque...

Page 9 - Page 9; Moving and Storage; This unit is equipped with wheels, so it can be easily moved.; Maintenance; IMPORTANT BASICS REGARDING ELECTRIC PRESSURE WASHERS

SKU 45802 Page 9 Moving and Storage This unit is equipped with wheels, so it can be easily moved. Store the Pressure Washer indoors. If you are keeping the machine in an environ-ment where there is danger of ice or frost forming on the unit, or if you do not usethe product for more than 3 months, we...

Page 10 - Assembly Drawings and Parts Lists

SKU 45802 Page 10 Fig. 1a: Assembly Drawing for Pressure Washer, Part 1 NOTE: Some parts are listed and shown for illustrationpurposes only and are not available individually asreplacement parts. REV 09/02 Assembly Drawings and Parts Lists REV 04/04

Page 15 - ITEM DESCRIPTION

SKU 45802 Page 15 Fig. 2b: Parts List for Gun Assembly Assembly Drawings and Parts Lists REV 09/02 REV 09/04 ITEM DESCRIPTION QTY Kit 1 High Pressure Hose Assembly 1 Kit 2 Handle Assembly 1 1 Left Handle 1 2 Right Handle 1 4 Trigger Lock 1 5 Spring 1 6 Valve Big O-Ring 2 7 Valve 1 8 Valve Small O-Ri...

Page 16 - Trouble Shooting

SKU 45802 Page 16 REV 09/02 REV 09/04 FAULTWhen the Switch is inthe “I” position,machine will not start. When the Switch is inthe “I” position, theengine buzzes, but themachine will not start. The pump doesn’treach the necessarypressure. Fluctuating pressure. The motor stopssuddenly. Water leaking f...