Chicago Electric Model 91811 - Manuals

Page 2 - SPECIFICATIONS; SAVE THIS MANUAL; SAVE THESE INSTRUCTIONS; Work Area; Keep your work area clean and well lit.; Cluttered benches and dark areas invite

SKU 91811 For technical questions, please call 1-800-444-3353. Page 2 REV 10/04; 11/04; 09/05 SPECIFICATIONS t n e r r u C g n i d l e W s p m A 0 3 1 o t 5 : e g n a R ; s p m A 0 3 1 : G I T C D s p m A 0 9 o t 5 : e g n a R ; s p m A 0 9 : C R A C D e g a t l o V d a o L s t l o V 6 . 1 2 : C R A...

Page 3 - Electrical Safety; Do not expose power tools to rain or wet conditions.; Personal Safety; Avoid accidental starting.

SKU 91811 For technical questions, please call 1-800-444-3353. Page 3 Electrical Safety 4. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 5. Do not expose power tools to rain or wet...

Page 5 - SPECIFIC SAFETY RULES FOR THIS PRODUCT

SKU 91811 For technical questions, please call 1-800-444-3353. Page 5 SPECIFIC SAFETY RULES FOR THIS PRODUCT 1. Maintain labels and nameplates on the welder. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. Maintain a safe working enviro...

Page 6 - Avoid overexposure to fumes and gases.; Always keep your head out of the fumes.

SKU 91811 For technical questions, please call 1-800-444-3353. Page 6 • Remove or make safe all combustible materials for a radius of 35 feet (10 meters)around the work area. Use a fire resistant material to cover or block all open door-ways, windows, cracks, and other openings. • Enclose the work a...

Page 7 - Always keep the Welding Hoses away from welding spot.; Examine the Welding; manufacturer’s manual for the material you will weld.

SKU 91811 For technical questions, please call 1-800-444-3353. Page 7 10. Always keep the Welding Hoses away from welding spot. Examine the Welding Hoses for cuts, burns, or worn areas before each use. If any damaged areas are found,replace the Welding Hoses immediately. 11. Read and understand all ...

Page 8 - Grounded, 220 VAC tools require a three wire extension cord.

SKU 91811 For technical questions, please call 1-800-444-3353. Page 8 GROUNDING This welder requires a 3-prong, 220 VAC, polarized, twistlock plug (not supplied). Thisplug must be installed by a qualified electrician. WARNING! Improperly connecting the grounding wire can result in the risk of electr...

Page 9 - SYMBOLOGY; UNPACKING

SKU 91811 For technical questions, please call 1-800-444-3353. Page 9 SYMBOLOGY Table B UNPACKING When unpacking, check to make sure that all the parts are included. Refer to the Assemblysection, and the Assembly Drawing and Parts List at the end of this manual. If any parts are missing or broken, p...

Page 11 - Arc Welding

SKU 91811 For technical questions, please call 1-800-444-3353. Page 11 10. When everything is in place for welding, press the Power Switch to the On position. Caution: Be careful not to touch anything else with the welding rod except the work-piece. 11. Orient yourself on the area to be welded, then...

Page 13 - PARTS LIST; PLEASE READ THE FOLLOWING CAREFULLY

SKU 91811 For technical questions, please call 1-800-444-3353. Page 13 7. Periodically clean out the TIG Torch Head by unscrewing its components and cleaning with a brush. PARTS LIST NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replaceme...

Page 14 - ASSEMBLY DRAWING

SKU 91811 For technical questions, please call 1-800-444-3353. Page 14 55 56 57 58 ASSEMBLY DRAWING

Page 15 - ELECTRICAL SCHEMATIC

SKU 91811 For technical questions, please call 1-800-444-3353. Page 15 ELECTRICAL SCHEMATIC