Chicago Electric Cookerhoods - Manuals

Chicago Electric Cookerhoods – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric Cookerhoods

Summary

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; UNPACKING

SKU 91482 For technical questions, please call 1-800-444-3353. Page 2 PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating,inspection, maintenance and cleaning procedures, parts list and assembly diagram.Keep your invoice with...

Page 3 - WORK AREA

SKU 91482 For technical questions, please call 1-800-444-3353. Page 3 3. Keep bystanders, children, and visitors away while operating a power tool.Distractions can cause you to lose control. ELECTRICAL SAFETY 1. Grounded tools must be plugged into an outlet properly installed andgrounded in accordan...

Page 4 - TOOL USE AND CARE

SKU 91482 For technical questions, please call 1-800-444-3353. Page 4 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.Keep your hair, clothing, and gloves away from moving parts. Looseclothes, jewelry, or long hair can be caught in moving parts. 3. Avoid accidental starti...

Page 5 - GROUNDING; outlet installed by a qualified electrician.

SKU 91482 For technical questions, please call 1-800-444-3353. Page 5 7. Check for misalignment or binding of moving parts, breakage of parts, andany other condition that may affect the tool’s operation. If damaged, havethe tool serviced before using. Many accidents are caused by poorly main-tained ...

Page 6 - FIGURE A; EXTENSION CORDS; Grounded tools require a three wire extension cord.

SKU 91482 For technical questions, please call 1-800-444-3353. Page 6 2. The grounding prong in the plug is connected through the green wire inside thecord to the grounding system in the tool. The green wire in the cord must be theonly wire connected to the tool’s grounding system and must never be ...

Page 7 - FIGURE B; RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; SYMBOLOGY; FIGURE C

SKU 91482 For technical questions, please call 1-800-444-3353. Page 7 FIGURE B 6. If you are using an extension cord outdoors, make sure it is marked with thesuffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good elec...

Page 8 - SPECIFIC SAFETY RULES

SKU 91482 For technical questions, please call 1-800-444-3353. Page 8 1. Maintain a safe working environment. Keep the work area well lit. Make surethere is adequate surrounding workspace. Always keep the work area free ofobstructions, grease, oil, trash, and other debris. Do not use the Tile Saw in...

Page 10 - Industrial applications must follow OSHA requirements.

SKU 91482 For technical questions, please call 1-800-444-3353. Page 10 28. Turn off the Tile Saw and allow the Saw Blade to stop on its own if the SawBlade is to be backed out of an uncompleted cut. 29. Never attempt to remove material stuck in the Tile Saw while it is pluggedin or running. 30. When...

Page 11 - ASSEMBLY INSTRUCTIONS; prior to assembling the unit,

SKU 91482 For technical questions, please call 1-800-444-3353. Page 11 ALUMINUM BASE (38) ALUMINUM COLUMN (35) BOLT (30) LARGE WASHER (32) BOLT (59) WASHER (58) POSITION TUBE (57) SHAFT (36) REAR VIEW FIGURE D KNOB (31) ASSEMBLY INSTRUCTIONS NOTE: For additional information regarding the par ts list...

Page 12 - the

SKU 91482 For technical questions, please call 1-800-444-3353. Page 12 WATER TANK (3) MACHINE FRAME (11) FIGURE E BOLT (93) EXTENSION TABLE (94) MAIN TABLE (99) FIGURE G FIGURE F ELECTRICAL RECEPTACLE PUMP (105) PUMP POWER CORD WATER HOSE (PRE-ATTACHED) (PLACE PUMP IN REAR OF WATER TANK) 6. Plug the...

Page 13 - CHANGING OR INSTALLING A SAW BLADE; prior to assembling the; FIGURE H

SKU 91482 For technical questions, please call 1-800-444-3353. Page 13 CHANGING OR INSTALLING A SAW BLADE 1. WARNING! Always make sure the Power Switch of the Tile Saw is in its “OFF”position and the unit is unplugged from its electrical outlet prior to assembling the unit, adding any accessories, o...

Page 15 - OPERATING INSTRUCTIONS; FIGURE M

SKU 91482 For technical questions, please call 1-800-444-3353. Page 15 OPERATING INSTRUCTIONS 1. Place the Saw (or saw and stand, if the optional stand is installed) on a level, evensurface, capable of supporting the tool and any forces exerted during work. Fill theWater Tank (3) with enough cold wa...

Page 16 - FIGURE O

SKU 91482 For technical questions, please call 1-800-444-3353. Page 16 4. Attach the 45° Miter Block (108) as you did the Parallel Guide, using the Knob (86)on the side of the Guide. (See Figure O.) FIGURE O 45° MITER BLOCK (108) KNOB (86) 5. Plug the Power Cord of the Tile Saw into the nearest, 120...

Page 17 - Periodically, remove the Pulley Cover (75) as explained under; PLEASE READ THE FOLLOWING CAREFULLY

SKU 91482 For technical questions, please call 1-800-444-3353. Page 17 INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Make sure the Power Switch of the Tile Saw is in its “OFF” positionand that the unit is unplugged from its electrical outlet before performing any inspec-tion, maintenance, or cle...

Page 18 - PARTS LIST

SKU 91482 For technical questions, please call 1-800-444-3353. Page 18 PARTS LIST P a r t # D e s c r i p t i o n Q t y . P a r t # D e s c r i p t i o n Q t y . 1 W a s h e r 4 6 1 S c r e w 3 2 N u t 2 6 2 R u b b e r P a d 1 3 W a t e r T a n k 1 6 3 B e a r i n g 2 4 E l a s t ic W a s h e r 4 6...

Page 19 - ASSEMBLY DIAGRAM

SKU 91482 For technical questions, please call 1-800-444-3353. Page 19 ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are notavailable individually as replacement parts. 105A 105B 105C 105D