Chicago Electric 98544 - Manuals

Page 2 - SaVE THIS manuaL; ImpORTanT SaFETY; general power Tool Safety; Failure to follow the warnings and; the presence of flammable liquids,; sparks which may ignite the dust or

SKU 98544 For technical questions, please call 1-800-444-3353. Page 2 SaVE THIS manuaL Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...

Page 3 - or under the influence of drugs,

SKU 98544 For technical questions, please call 1-800-444-3353. Page 3 plugs with grounded power tools. Unmodified plugs and matching out - lets will reduce risk of electric shock. avoid body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased r...

Page 5 - Driver, always maintain a firm grip

SKU 98544 For technical questions, please call 1-800-444-3353. Page 5 Specific Drill/Driver Safety Warnings maintain a safe working environ- 1. ment. Keep the work area well lit. Make sure there is adequate sur- rounding workspace. Always keep the work area free of obstructions, grease, oil, trash, ...

Page 6 - flammable, but they also obstruct; Vibration Safety

SKU 98544 For technical questions, please call 1-800-444-3353. Page 6 13. The battery charger gets hot during use. The charger’s heat can build up to unsafe levels and create a fire hazard if it does not receive adequate ventilation, due to an electrical fault, or if it is used in a hot environment....

Page 7 - SaVE THESE; gROunDIng; Check with a qualified; grounded Tools: Tools with Three

SKU 98544 For technical questions, please call 1-800-444-3353. Page 7 vibration may cause temporary or permanent physical injury, particularly to the hands, arms and shoulders. To reduce the risk of vibration-related injury:Anyone using vibrating tools regu- 1. larly or for an extended period should...

Page 8 - which satisfies OSHA requirements; Extension Cords; Grounded

SKU 98544 For technical questions, please call 1-800-444-3353. Page 8 electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See 3-prong plug and Outlet.) The grounding prong in the plug is 2. co...

Page 9 - a qualified electrician before using it.; Symbology; SpECIFICaTIOnS; unpaCKIng

SKU 98544 For technical questions, please call 1-800-444-3353. Page 9 Make sure the extension cord is prop- 7. erly wired and in good electrical con- dition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. Protect the extension cords from 8. sh...

Page 10 - Charge on non-flammable surface; Charging; charge for three to five hours in order

SKU 98544 For technical questions, please call 1-800-444-3353. Page 10 Lithium Battery Safety and Charging Instructions Do not leave Drill/Driver unattended 1. while charging.Battery charging should be done by 2. adults only. Charge on non-flammable surface 3. and keep away from flammable items.Turn...

Page 11 - OPERATING INSTRUCTIONS; Work Piece and Work Area Set Up; NOTE: For additional information regarding; driver bits, you must first attach the

SKU 98544 For technical questions, please call 1-800-444-3353. Page 11 is fully charged, unplug the Charger from the electrical outlet and remove the Battery Pack from the Adapter. OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including a...

Page 13 - CLEanIng anD; Procedures not specifically

SKU 98544 For technical questions, please call 1-800-444-3353. Page 13 Drill only as deep as necessary. Do not drill deeper than necessary into walls or other areas where you can- not identify any possible hazards behind the drilling surface.To reduce jamming as the Bit breaks through the workpiece,...

Page 14 - part; part; pLEaSE REaD THE FOLLOWIng CaREFuLLY

SKU 98544 For technical questions, please call 1-800-444-3353. Page 14 paRTS LIST part Description Qty. 1 Screw (M6 x 16) 1 2 3/8” Keyless Chuck 1 3 Screw (M2.2 x 12) 4 4 Mounting Plate 1 5 Spring Holder 1 6 Torque Control 1 7 Sleeve 1 8 Torque Spring 1 9 C-Ring 1 10 Washer 1 11 Ball 15 12 Washer 1 ...

Page 16 - LImITED 90 DaY WaRRanTY; WARRANTIES OF MERCHANTABILITy AND FITNESS.

SKU 98544 For technical questions, please call 1-800-444-3353. Page 16 LImITED 90 DaY WaRRanTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materi...