Chicago Electric 98332 - Manuals

Page 2 - saVe this manual; imPortant saFetY; General Power tool safety; the presence of flammable liquids,

SKU 98332 For technical questions, please call 1-800-444-3353. Page 2 saVe this manual Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...

Page 3 - or under the influence of drugs,

SKU 98332 For technical questions, please call 1-800-444-3353. Page 3 avoid body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. do not expose power tools to rain c. or wet conditions. Water ...

Page 4 - a qualified repair person using; Parts Washer safety Warnings; • Lead from lead-based paints

SKU 98332 For technical questions, please call 1-800-444-3353. Page 4 Power tool use and care 4. do not force the power tool. use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate for which it was designed. do not use the power tool...

Page 5 - saVe these; GroundinG; Check with a qualified

SKU 98332 For technical questions, please call 1-800-444-3353. Page 5 approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq. ) Cleaning may produce Aluminum 6. Oxide dust which can c...

Page 6 - which satisfies OSHA requirements; extension cords; Grounded

SKU 98332 For technical questions, please call 1-800-444-3353. Page 6 Grounded tools: tools with three Prong Plugs Tools marked with “Grounding Re- 1. quired” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrica...

Page 7 - a qualified electrician before using it.; symbology

SKU 98332 For technical questions, please call 1-800-444-3353. Page 7 The smaller the gauge number of the 3. wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (see table a.) When using more than one exten- 4. sion cord to make u...

Page 8 - sPeciFications; unPacKinG; list of contents; instructions For; assembly; Attach the Legs / Shelf assembly to

SKU 98332 For technical questions, please call 1-800-444-3353. Page 8 sPeciFications Electrical Requirements 120 V~ / 60 Hz Fluid Capacity 20 Gallons Maximum Flow 5.28 Gallons per Minute Fusible Link Tested at 185° F. unPacKinG When unpacking, check to make sure that the item is intact and undamaged...

Page 9 - Functions; will melt in the case of fire, shutting; oPeratinG instructions; tool set up; Prior to use, the tool must be filled; Work Piece and Work area set up

SKU 98332 For technical questions, please call 1-800-444-3353. Page 9 Functions When used with an appropriate sol- 1. vent (not included) this Parts Washer is useful for cleaning mechanical parts of dirt, grease and other con- taminants.When activated, the pump directs a 2. stream of solvent into th...

Page 10 - General operating instructions; With Parts Washer filled, direct the; maintenance and; Procedures not specifically; lubrication

SKU 98332 For technical questions, please call 1-800-444-3353. Page 10 Appropriate brushes, grips, rags, 5. etc. should be provided for effective cleaning.Safe disposal must be provided for 6. any rags or other materials used in the cleaning process. General operating instructions To fill parts Wash...

Page 11 - replacing the cleaning solvent; stall before refilling the Parts Washer

SKU 98332 For technical questions, please call 1-800-444-3353. Page 11 aFter use, 2. clean external surfaces of the tool with clean cloth. 3. WarninG! if the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. replacing the cleaning solvent When the...

Page 12 - Part; Parts list; Part; Please read the FolloWinG careFullY

SKU 98332 For technical questions, please call 1-800-444-3353. Page 12 Parts list Part description Qty. 1 Cover 1 2 Work Basket 1 3 Spring Pan 1 4 Pin 2 5 Safety Plate 1 6 Work Shelf 1 7 Body 1 8 Spring Washer 24 9 Nut 24 10 O-ring 1 11 Drain Plug 1 12 Shelf 1 13 Leg 4 14 Pan Screw 24 15 Pump Housin...

Page 13 - assemBlY diaGram; able individually as replacement parts.

SKU 98332 For technical questions, please call 1-800-444-3353. Page 13 assemBlY diaGram record Product’s serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not avail- able...

Page 14 - limited 90 daY WarrantY; WARRANTIeS OF MeRCHANTAbILITy AND FITNeSS.

SKU 98332 For technical questions, please call 1-800-444-3353. Page 14 limited 90 daY WarrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materi...