Chicago Electric 98265 - Manuals

Page 2 - SAVE THIS MANUAL; IMPORTANT SAFETY; General Tool Safety Warnings

Page 2 For technical questions, please call 1-800-444-3353. SKU 98265 SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspec- tion, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagr...

Page 4 - GROUNDING INSTRUCTIONS; with Three Prong Plugs; Tile Saw Safety Warnings

Page 4 For technical questions, please call 1-800-444-3353. SKU 98265 GROUNDING INSTRUCTIONS TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION READ AND FOLLOW THESE INSTRUCTIONS: 110-120 V~ Grounded Tools: Tools with Three Prong Plugs 1. In the event of a malfunction or br...

Page 7 - NOT T

Page 7 For technical questions, please call 1-800-444-3353. SKU 98265 Essential Straight Push-stick Features and Functions Note: Straight style (traditional) stick shown. A dif- ferent stick design may be used if it properly protects against all hazards. Diagram not to scale. • Push sticks must be m...

Page 11 - List of contents; INSTRUCTIONS FOR PUTTING; Assembly

Page 11 For technical questions, please call 1-800-444-3353. SKU 98265 SPECIFICATIONS Maximum Blade Diameter 7"Arbor Hole 5/8" Maximum Cutting Capacity 1-1/8" @ 90° 3/4" @ 45° Tilting Head 45° Left-Tilt only Electrical Requirements 120 V~ / 60 Hz / 10 A Blade Rated Speed 5000 RPM Wat...

Page 12 - Mounting; OPERATING INSTRUCTIONS; Work Piece and Work Area Set Up

Page 12 For technical questions, please call 1-800-444-3353. SKU 98265 4. Fig. 1 The Handle (B13) must be installed onto the Holder (B09) using the two supplied Hex Screws (B12). (See Fig. 1.) 5. Fig. 2 Holding Clips Be sure the water pump (A25) is properly installed within its holding clips (see Fi...

Page 13 - General Operating Instructions

Page 13 For technical questions, please call 1-800-444-3353. SKU 98265 General Operating Instructions 1. Fig. 3 Power Switch Reset Button When making a flat cut, slide the piece to be cut up against the two Fence (D09,D12) halves securely and stabilize one side with the provided Clamp Plate. 2. When...

Page 14 - Lubrication

Page 14 For technical questions, please call 1-800-444-3353. SKU 98265 MAINTENANCE AND SERVICING Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool to its “OFF” ...

Page 15 - Troubleshooting

Page 15 For technical questions, please call 1-800-444-3353. SKU 98265 5. Remove the blade and replace with a new one. Make sure the arrow on the blade matches the direction of the arrow embossed on the blade cover. 6. With the flat wrench in place again, reinstall the blade’s hex bolt turning clock...

Page 16 - PARTS LIST AND ASSEMBLY DIAGRAM A (MOTOR); PLEASE READ THE FOLLOWING CAREFULLY

Page 16 For technical questions, please call 1-800-444-3353. SKU 98265 Part Description Qty A01 Screw (M5x12) 5 A02 Hose Connect 1 A03 Water Tubing 1 A04 Screw (M5x10) 2 A05 Inner Flange 1 A06 Bearing (6202RT) 1 A07 Washer (14) 1 A08 Bearing (628-R) 1 A09 Grounding Wire 1 A10 Front Motor Cover 1 A11...

Page 17 - PARTS LIST AND ASSEMBLY DIAGRAM B (HANGER)

Page 17 For technical questions, please call 1-800-444-3353. SKU 98265 PARTS LIST AND ASSEMBLY DIAGRAM B (HANGER) Part Description Qty. B01 Screw (M4x6) 3 B02 Screw (M4x20) 1 B03 Hex Nut (M4) 1 B04 Linear Bushing 2 B05 Felt Bushing 4 B06 Seal 4 B07 Bearing 4 B08 Hex Bolt (M6x20) 4 B09 Holder 1 B10 K...

Page 18 - PARTS LIST AND ASSEMBLY DIAGRAM C (SUPPORT)

Page 18 For technical questions, please call 1-800-444-3353. SKU 98265 PARTS LIST AND ASSEMBLY DIAGRAM C (SUPPORT) Part Description Qty. C01 Steel Support B 1 C02 Connection Shaft 2 C03 Set Screw (M4x15) 7 C04 Flat Washer 2 C05 Knob 2 C06 Socket Wrench 1 C07 Spring Washer 7 C08 Flat Washer 9 C09 Wre...

Page 19 - PARTS LIST AND ASSEMBLY DIAGRAM D (WORK TABLE)

Page 19 For technical questions, please call 1-800-444-3353. SKU 98265 PARTS LIST AND ASSEMBLY DIAGRAM D (WORK TABLE) Part Description Qty. D01 Hex Nut (M6) 20 D02 Spring Washer 24 D03 Flat Washer 24 D04 Stainless Steel Frame 1 D05 Hex Bolt (M6x30) 8 D06 Table End 2 D07 Right Fence Cover 1 1 D08 Sca...

Page 20 - PARTS LIST AND ASSEMBLY DIAGRAM E (WATER TRAY)

Page 20 For technical questions, please call 1-800-444-3353. SKU 98265 PARTS LIST AND ASSEMBLY DIAGRAM E (WATER TRAY) Part Description Qty. EO1 Water Tray 1 EO2 O-Ring 1 EO3 Drain Plug 1 EO4 Rubber Cap 1 EO5 Flat Washer 7 EO6 Set Screw 11 EO7 Rubber Feet 7 EO8 Carrying Handle Grip 2 REV 10b

Page 21 - LIMITED 90 DAY WARRANTY

Page 21 For technical questions, please call 1-800-444-3353. SKU 98265 LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...