Chicago Electric 97717 - Manuals

Page 2 - COnTEnTS

Page 2 SKU 97717 For technical questions, please call 1-800-444-3353. COnTEnTS IMPORTAnT SAFETY InFORMATIOn ..................................................... 3 gEnERAL SAFETY RuLES .................................................................................... 3 SPECIFIC SAFETY RuLES..........

Page 3 - SAVE THIS MAnuAL; IMPORTAnT SAFETY; general Safety Rules; Cluttered or dark areas invite; Notice; CAuTIOn

Page 3 SKU 97717 For technical questions, please call 1-800-444-3353. SAVE THIS MAnuAL K e e p t h i s m a n u a l f o r t h e s a f e t y warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near ...

Page 4 - Personal safety; tired or under the influence of drugs,; Power tool use and care

Page 4 SKU 97717 For technical questions, please call 1-800-444-3353. Do not touch exposed electrical b. parts.Do not expose power tools to rain c. or wet conditions. Water entering a power tool will increase the risk of electric shock.Do not abuse the cord. Never use d. the cord for pulling or unpl...

Page 5 - Service; Specific Safety Rules

Page 5 SKU 97717 For technical questions, please call 1-800-444-3353. Use the power tool, accessories and f. tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed...

Page 8 - WARnIng; Welding and Plasma Cutting Produce; SAVE THESE

Page 8 SKU 97717 For technical questions, please call 1-800-444-3353. WARnIng InHALATIOn HAzARD: Welding and Plasma Cutting Produce TOxIC FuMES. Exposure to welding or cutting exhaust fumes can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer. Also, some ...

Page 9 - SPECIFICATIOnS; unPACKIng; Assembly; place the Shield on a flat surface.

Page 9 SKU 97717 For technical questions, please call 1-800-444-3353. SPECIFICATIOnS Electrical Requirements 120 V~ / 60 Hz Power Plug: 20 Amp/3 Prong / Grounded Input Current 20 Amps Power Switch Type Rocker with Light (Yellow) Indicators Thermal Overload Light (Red) Settings Minimum: 50 Amp Maximu...

Page 10 - OPERATIng InSTRuCTIOnS; Workpiece and Work Area Set up; pieces should be held together firmly; general Operating Instructions; The duty cycle defines the number of

Page 10 SKU 97717 For technical questions, please call 1-800-444-3353. install a 120 volt, 20 Amp, 3-hole, grounded electrical outlet. (See Figure b.) OPERATIng InSTRuCTIOnS Read the EnTIRE IMPORTAnT SAFETY InFORMATIOn section at the beginning of this manual including all text under subheadings ther...

Page 11 - This Welder is equipped with an; “On”; Stroke

Page 11 SKU 97717 For technical questions, please call 1-800-444-3353. cycle (at 70 Amps), actual welding can occur for one minute and then the welder must cool for nine minutes . At a 20% duty cycle (at 50 Amps), welding can occur for 2 minutes and then the welder must cool for 8 minutes . Failure ...

Page 12 - MAInTEnAnCE AnD

Page 12 SKU 97717 For technical questions, please call 1-800-444-3353. Switch (13) to its “OFF” position and wait about 10 minutes. Then restart the Welder. (See Assy. Diagram.) When the weld is complete, lift the 11. electrode clearly away from any grounded object. Set the Welding Shield down, and ...

Page 13 - TROubLESHOOTIng; PLEASE READ THE FOLLOWIng CAREFuLLY

Page 13 SKU 97717 For technical questions, please call 1-800-444-3353. Problem Possible Causes Possible Solutions Welder does not “hum” when turned on. No power at electrical outlet. 1. Broken or damaged Power Cord. 2. Check circuit fuse or circuit breaker. 1. Have Power Cord repaired or replaced by...

Page 14 - PARTS LIST AnD ASSEMbLY DIAgRAM

Page 14 SKU 97717 For technical questions, please call 1-800-444-3353. PARTS LIST AnD ASSEMbLY DIAgRAM Part # Description Qty . Part # Description Qty . 1 Cord Strain Relief (1.0mm) 1 13 Power Switch (Y ellow) 1 2 Screw (ST3.9x13) 18 14 Cord Strain Relief (3.0mm) 2 3 Case 1 15 Screw (M5 x 25) 3 4 Te...

Page 15 - available individually as replacement parts.; LIMITED 1 YEAR / 90 DAY WARRAnTY; free of defects in materials and workmanship.; This Limited 90 Day/1 Year Warranty; THIS

Page 15 SKU 97717 For technical questions, please call 1-800-444-3353. Record Product’s Serial number Here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as re...